Smartec STR-3293 Manual de usuario

www.smartec-security.eu

Smartec – Thirty two channel DVR

STR – 3293

User Manual

CONTENT VERIFICATION

Before installing the DVR, please make sure that the following items are included in the

box:

1. Digital Video Recorder

2. Remote Controller

3. DVR Client Software CD

4. Power Cable

5. Two AAA Batteries

6. Rack Mount Kit

7. This Instruction Manual

If any of these materials are missing, please contact the vendor or SMARTEC customer.

DISCLAIMER

·While every effort has been made to ensure that the information contained in this

guide is accurate and complete, no liability can be accepted for any errors or

omissions.

·SMARTEC reserves the right to change the specifications of the hardware and

software described herein at any time without prior notice.

·No part of this guide may be reproduced, transmitted, transcribed, stored in a

retrieval system, or translated into any language in any form, by any means, without

prior written permission of SMARTEC.

·SMARTEC makes no warranties for damages resulting from corrupted or lost data

due to a mistaken operation or malfunction of the Digital Video Recorder, the

software, the hard drives, personal computers, peripheral devices, or

unapproved/unsupported devices.

Trademark Acknowledgements

·SMARTEC, SMARTEC EasyNet –VMS, SMARTEC EasyNet - WebViewer are

trademarks of SMARTEC, Inc.

·SV35 series HDDs are a trademark of Seagate Corporation.

·Microsoft, Windows98, Windows ME, Windows NT, Windows XP, Internet Explorer

are either registered trademarks or trademarks of Microsoft Corporation in the

United States and/or other countries.

·Other names and products not mentioned above may be registered trademarks or

trademarks of their respective companies.

FCC NOTICE

SMARTEC Digital Video Recorders

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions;

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for Class B

digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by on or more of the

following measures:

·Reorient or relocate the receiving antenna.

·Increase the separation between the equipment and receiver.

·Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

·Consult the dealer or an experience radio/TV technician for help.

The hard disk provided with the digital video recorder must be used with this equipment

in order to comply with Class B limits in subpart B of Part 15 on FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified

in the manual. If such changes or modifications should be made, you could be required

to stop operation of the equipment.

Canadian Radio Interference Regulations

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE

CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS.

Read this First

Test Sessions

Before you try to record important subjects, we highly recommend that you make

several test recording and playback sessions to ensure that the Digital Video Recorder

is operating and being operated correctly. Please note that SMARTEC, its subsidiaries

and affiliates, and its distributors are not liable for any consequential damages arising

from any malfunction of a Digital Video Recorder or its accessory, including the hard

disk drive, which results in the failure of an image to be recorded or to be recorded in a

format that is machine sensible.

The Privacy act of 1974 (5 U.S.C. § 552a)

Please note that SMARTEC Digital Video Recorders are intended for recording of

surveillance use and should never be used in a manner that invades other people’s

privacy or contravenes international or domestic privacy act and its regulations. Please

be advised that in certain cases the recording of individuals, private properties, or

commercial properties by means of camera or other devices may contravene legal

rights of such individuals even if the images were recorded for personal use.

Warranty Limitations

This Digital Video Recorder’s warranty is only effective in the country of sale. If a

problem arises while the DVR is in use abroad, please convey it back to the country of

sale before proceeding with a warranty claim to SMARTEC customer help desk.

SAFETY PRECAUTIONS

·Before using the Digital Video Recorder, please ensure that you read and

understand the safety precautions described below. Always ensure that the Digital

Video Recorder is operated correctly.

·The safety precautions noted on the following pages are intended to instruct you in

the safe and correct operation of the DVR and its accessories to prevent injuries or

damage to the self, other persons and equipment.

·In this Instruction Manual, the term “DVR”, “equipment” and “device” refers primarily

to the Digital Video Recorder and its accessories such as power supply and its

remote controller.

WARNING

·Do not cover the ventilation opening or slots on the outer casing. To prevent the

DVR from overheating, provide at least two inches of air space around the vent and

the slots.

·Do not drop metallic parts through slots. This could permanently damage the Digital

Video Recorder. Immediately turn the DVR’s power off or unplug the power cord

from the power outlet. Contact a qualified service personnel authorized by the

equipment distributor or a SMARTEC customer help desk.

·Do not attempt to disassemble or alter any part of the equipment that is not

expressly described in this guide. Disassembly or alteration may result in high

voltage electrical shock. Internal inspections, alterations and repairs should be

conducted by qualified service personnel authorized by the equipment distributor or

SMARTEC customer help desk.

·Stop operating the equipment immediately if it emits smoke or noxious fumes.

Failure to do so may result in fire or electrical shock. Immediately turn the DVR’s

power off, remove the power cable from the power outlet. Confirm that smoke and

fume emissions have ceased. Please consult the DVR distributor or the closest

SMARTEC customer help desk.

·Stop operating the equipment if a heavy object is dropped or the casing is damaged.

Do not strike or shake. Failure to do so may result in fire or electrical shock.

Immediately turn the DVR’s power off or unplug the power cord from the power

outlet. Please consult the DVR distributor or the closest SMARTEC customer help

desk.

·Do not allow the equipment come into contact with, or become immersed in, water or

other liquids. Do not allow liquids to enter the interior. The DVR has not been

waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry

with a soft, absorbent cloth. In the event that the water or other foreign substances

enter the interior, immediately turn the DVR’s Power off or unplug the power cord

from the power outlet. Continued use of the equipment may result in fire or electrical

shock. Please consult the DVR distributor or the closest SMARTEC customer help

desk.

·Do not use substances containing alcohol, benzene, thinners or other flammable

substances to clean or maintain the equipment. The use of these substances may

lead to fire. Use a dry cloth on a regular periodic basis and wipe away the dust and

dirt that collects on the device. In dusty, humid or greasy environments, the dust

that collects around the ventilation or the slots on the outer casing over long periods

of time may become saturated with humidity and short-circuit, leading to fire.

·Do not cut, damage, alter or place heavy items on the power cord. Any of these

actions may cause an electrical short circuit, which may lead to fire or electrical

shock.

·Do not handle the device or power cord if the hands are wet. Handling it with wet

hands may lead to electrical shock. When unplugging the cord, ensure that you hold

the solid portion of the plug. Pulling on the flexible portion of the cord may damage

or expose the wire and insulation, creating the potential for fires or electrical shocks.

·Use only the recommended power accessories. Use of power sources not expressly

recommended for this equipment may lead to overheating, distortion of the

equipment, fire, electrical shock or other hazards.

·Do not place the battery near a heat source or expose it to direct flame or heat.

Neither should you immerse them in water. Such exposure may damage the battery

and lead to the leakage of corrosive liquids, fire, electrical shock, explosion or

serious injury.

·Do not attempt to disassemble, alter or apply heat to the battery. There is serious

risk of injury due to an explosion. Immediately flush with water any area of the body,

or clothing that comes into contact with the inner contents of the battery. If the eyes

or mouth contact these substances, immediately flush with water and seek medical

assistance from a medical professional.

·Avoid dropping or subjecting the battery to severe impacts that could damage the

casings. It could lead to leakage and injury.

·Do not short-circuit the battery terminals with metallic objects, such as key holders.

It could lead to overheating, burns and other injuries.

·The supplied power supply and power cord are designed for exclusive use with the

Digital Video Recorder. Do not use it with other products or battery. There is a risk

of fire and other hazards.

CAUTION

·Avoid using, placing or storing the equipment in places subject to strong sunlight or

high temperatures, such as the greenhouse or trunk of a car. Exposure to intense

sunlight and heat may cause the battery to leak, overheat or explode, resulting in fire,

burns or other injuries. High temperatures may also cause deformation of the casing.

Ensure that there is good ventilation when using the equipment.

·Do not store the equipment in humid or dusty areas. Storage in such areas could

lead to fire, electrical shock or other damage.

·Do not operate the DVR beyond its specified temperature, humidity or power source

ratings. Do not use the DVR in an extreme environment such as in high temperature

or high humidity. Use the device at temperatures within 41°F - 104°F and humidity

below 90 %. The normal operating power source for this device is 110V-220V AC

50/60Hz.

PREVENTING MALFUNCTION

·Avoid Strong Magnetic Fields. Never place the DVR in close proximity to electric

motors or other equipment generating strong electromagnetic fields. Exposures to

strong magnetic fields may cause malfunctions or corrupt image data.

·Avoid Condensation Related Problems. Moving the equipment rapidly between hot

and cold temperatures may cause condensation (water droplets) to form on its

external and internal surfaces. You can avoid this by placing the equipment in an

airtight, resealable plastic bag and letting it adjust to temperature changes slowly

before removing it from the bag.

·If Condensation forms inside the Digital Video Recorder. Stop using the equipment

immediately if you detect condensation. Continued use may damage the equipment.

Remove the power cord from the power outlet and wait until the moisture evaporates

completely before resuming use.

TABLE OF CONTENTS

CONTENT VERIFICATION .............................................................................................................................. 1

DISCLAIMER...................................................................................................................................................... 2

FCC NOTICE.......................................................................................................................................................3

READ THIS FIRST ............................................................................................................................................. 4

SAFETY PRECAUTIONS................................................................................................................................... 5

WARNING ........................................................................................................................................................... 5

CAUTION ............................................................................................................................................................ 7

PREVENTING MALFUNCTION ....................................................................................................................... 7

TABLE OF CONTENTS ..................................................................................................................................... 8

DIGITAL VIDEO RECORDER LAYOUT....................................................................................................... 10

1. FRONT PANEL ......................................................................................................................................... 10

2. REAR PANEL............................................................................................................................................ 12

3. IR REMOTE CONTROLLER................................................................................................................... 13

4. INSTALLATION AND CONNECTION ................................................................................................... 15

5. ALARM CONNECTION ........................................................................................................................... 15

DEFAULT ADMIN LOGIN PASSWORD........................................................................................................ 16

I. QUICK SETUP............................................................................................................................................... 17

A. DATE/TIME.............................................................................................................................................. 17

B. GLOBAL RECORD .................................................................................................................................. 17

C. RECORD WIZARD .................................................................................................................................. 18

1. FRAME RATE PRIORITY..................................................................................................................... 18

2. PICTURE QUALITY PRIORITY ........................................................................................................... 18

D. PANIC RECORD ...................................................................................................................................... 19

II. BASIC OPERATION.................................................................................................................................... 20

A. MAIN SCREEN......................................................................................................................................... 20

B. LIVE VIEW............................................................................................................................................... 21

1. LIVE VIEW SWITCH SEQUENCE........................................................................................................ 21

2. AUTOMATIC SEQUENCE.................................................................................................................... 22

3. ZOOM .................................................................................................................................................... 23

C. PLAYBACK.............................................................................................................................................. 24

1. PLAY / STILL / STOP............................................................................................................................ 24

2. FIELD BY FIELD, FAST REWIND, & FAST FORWARD PLAYBACK ............................................... 25

3. AUDIO PLAYBACK.............................................................................................................................. 26

III. ADVANCED OPERATION ........................................................................................................................ 27

A. LOCK ........................................................................................................................................................ 27

B. BACKUP.................................................................................................................................................... 27

1. Built-in CD/DVD.................................................................................................................................... 27

2. USB FLASH MEMORY DRIVE - “USB”............................................................................................... 28

3. USB FLASH MEMORY DRIVE – “AVI”............................................................................................... 29

4. MINI PLAYER....................................................................................................................................... 29

C. PAN / TILT / ZOOM CONTROL ............................................................................................................. 30

D. PLAYBACK.............................................................................................................................................. 31

1. GOTO Search.......................................................................................................................................... 31

2. Log Search.............................................................................................................................................. 31

3. Calendar Search ...................................................................................................................................... 32

IV. ADVANCED SETUP ................................................................................................................................... 33

A. ADVANCED RECORD ............................................................................................................................ 33

1. SCHEDULE OFF.................................................................................................................................... 33

2. SCHEDULE ON ..................................................................................................................................... 34

B. EVENT ...................................................................................................................................................... 36

1. MOTION SETUP.................................................................................................................................... 36

2. ALARM SOURCE.................................................................................................................................. 37

3. ALARM ACTION .................................................................................................................................. 37

C. DEVICE..................................................................................................................................................... 38

1. CAMERA ............................................................................................................................................... 38

2. MONITOR.............................................................................................................................................. 38

3. AUDIO ................................................................................................................................................... 39

4. COM PORT ............................................................................................................................................ 39

D. NETWORK ............................................................................................................................................... 40

1. NETWORK ............................................................................................................................................ 40

2. DDNS..................................................................................................................................................... 40

3. NTP SETTING........................................................................................................................................ 41

4. NOTIFICATION..................................................................................................................................... 41

CONFIGURING THE DVR WITH A ROUTER INTO A LAN.................................................................... 42

CONFIGURING THE DVR WITH A CROSSOVER CABLE ..................................................................... 46

E. SYSTEM.................................................................................................................................................... 49

1. LOCAL USER ........................................................................................................................................ 49

2. REMOTE USER ..................................................................................................................................... 49

3. HOLIDAY SCHEDULE ......................................................................................................................... 50

4. DISK UTILITY....................................................................................................................................... 50

5. SYSTEM INFO....................................................................................................................................... 52

6. SYSTEM ALARM.................................................................................................................................. 53

7. STATUS OVERVIEW............................................................................................................................ 53

V. SMARTEC EASYNET - WEBVIEWER...................................................................................................... 54

A. INSTALLING THE SMARTEC EASYNET -WEBVIEWER ................................................................... 54

B. USING THE SMARTEC EASYNET - WEBVIEWER .................................................................................. 56

1. MAIN DISPLAY .................................................................................................................................... 56

2. CONFIGURATION TOOLS ................................................................................................................... 57

3. PLAYBACK........................................................................................................................................... 58

4. PTZ CONTROL...................................................................................................................................... 60

VI. TECHNICAL SUPPORT.............................................................................................................................61