SMART SBX3100 Manual de usuario
USER GUIDE
Model: SBX3100
www.kcicommunications.com
VER 1.2.0
4th Edition
Thank you for purchasing the Smart Black Box Drive Recorder.
Please ensure that you read and understand this USER GUIDE
before connecting and installing this Recorder.
Please store the USER GUIDE in an easily accessible location.
Caution
Damages due to production malfunction, loss of data, or other damages occurring while
using this product shall not be the responsibility of the manufacturer. Although the
product is a device used for recording videos, the product may not save all videos in the
case of a malfunction. In the case of an accident, the sensor may not recognize the
shock when the impact is light and as a result it may not begin recording automatically.
SAFETY ADVICE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
Caution
Install the product where it does not block driver’s visibility
and where there is no airbag installed. This could cause an
accident or might injure the passengers in case of accident.
Please make sure you follow the safety advice/instructions given in the user guide.
3
Caution
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Battery for RTC(Real Time Clock) inside
Caution
When the impact is light like very light, such as a minor bump in the road,
the G-sensor may not recognize the impact and as a result it may not begin
recording automatically. Test and set your own G-sensor level for your vehicle.
GPS Reception
1. Activate the product in an area without large buildings
to improve GPS reception.
2. The temperature range for optimum operation of the GP
S receiver in your car is -10 ~ 50°C.
3. When using the product for the first time or after a long
period (more than three days), it may take a little longer
to recognize your current location.
It may take between five and thirty minutes to get GPS reception.
GPS reception may be impaired under the following circumstances.
1) If there is an object at the end of the GPS antenna
2) If your vehicle has metallic elements on the windshields
3) If equipment generating electromagnetic waves that interfere with the GPS
signal is installed in the vehicle e.g.: Other GPS devices such as a certain
type of wireless activated alarms, MP3 and CD players and camera alarms
using GPS.
4) If you are using a receiver connected by cable, electric interference can be
avoided by simply changing the location of the receiver (antenna).
5) On heavily overcast or cloudy days, if the vehicle is in a covered location
such as under a bridge or raised roadway, in a tunnel, an underground
roadway or parking area, inside a building or surrounded by high-rise
buildings.
6) If GPS signal reception is poor, it may take longer to locate your current
position when the vehicle is moving than when it is stationary.
4
The commercial purpose GPS has the average rage error of more
than 15 meters and the range error could be more than 100 meters
due to environmental conditions like buildings, roadside trees etc.
CONTENTS
1. SBX-3100 unit
2. 4GB SD memory card
(The PC Viewer software is
provided on the SD card.)
5
You should have a set of the following items for each SBX-3100 order.
3. GPS Antenna module
4. Remote Controller
5.Audio/Video output cable
6. Power Cable
6
CONTENTS
8. Wire Splice clip (5pcs)
9. Sticker (double sided tape 1pc)
7. Camera input cable
10. Velcro Sticker (1pc)
INTRODUCTION
FRONT
REAR
7
SD Slot
SD Door
Audio/Video
Output
External MIC input
BUZZER
Internal Microphone
Camera 1, 2 Input
Remote Control Input
GPS Input Power Input
&
Alarm (Car Signal)
Input
(Turn left, Turn right,
Brake, Speed pulse)
Rear View
Camera Input
INTRODUCTION
REMOTE CONTROLLER
8
Record LED
BLUE LED
Overwrite LED
RED LED
SHUTTER BUTTON
PLAY BUTTON
PANIC BUTTON
Audio Video Output Cable
Video out 1 Video out 2
Audio out 1
[Note] The same screen will be shown through the Video out 1 & 2.
9
INTRODUCTION
Power & Car Signal Input
FUSE
250V 3A
Red(+) Black (Ground)
BLUE (Alarm1)
Yellow (Alarm3)
White (Speed pulse)
Green (Alarm2)
FUNCTION (MAIN UNIT)
Automatic start
Make sure that peripherals include cameras are properly connected.
Turn on the vehicle power, SBX-3100 will be automatically started. (Use the
power cable provided.)
Event record
The Event recording will be started automatically by Alarm1 to 3 or by the G-
sensor level.
The Panic recording can be started by pressing the [PANIC] button.
10
Notice : The unit will not start recording immediately after the power is
turned on. It takes around 1 minute for the built-in power backup system
to charge. Thereafter, the internal flash memory will be ready to record.
Normal record (Continuous record)
The Normal(continuous) recording will be automatically started after power on.
SBX-3100 will not make a separate event file during the continuous recording.
It will mark the Event area as ‘Alarm1~3’, G-senor or [PANIC] button in the
continuous recording file, which can be easily searched for during playback.
Live screen on Monitor
SBX-3100 will display the live screen on the monitor.
The camera channel can be changed using the information OSD.
(Refer to page 13)
Playback in the car
Recorded files can be played back in the car.
PC Viewer Software
The software is pre-loaded on the SD card [pcsw] folder.
Dual record (Event & Normal record)
If you set different record modes per camera, like camera1 set as Event record
and camera2 set as Normal record, then camera1(Event record) will work
according to the record setting for example 10frames per second recording.
However camera2(Normal record)will record 1frame per second, if there is no
event. If there is an Event, both cameras will record according to the record
setting for example 10 frames per second recording.
Tabla de contenidos
