FUNCTION (MAIN UNIT)
Automatic start
Turn on the vehicle’s power and the SVC400GPS will be automatically started. (U
se the power cable provided).
Event Recording
The Event recording function will be started automatically by the alarm inputs (1 to
3) or by the G-Sensor level.
Panic Recording
The Panic recording function can be started by pressing the [RECORD] button.
Normal Recording (Continuous recording)
The Normal recording will automatically start after the unit has been powered on.
The SVC400GPS will not make a separate Event file during continuous
recording. It will mark the Event area as ‘Alarm1-3’, ‘G-Sensor’ or ‘Record Button’
in the continuous recording file ,which can be easily searched for during playback.
Live Screen and Camera 4 (Rear View)
SVC400GPS will display the live view on a monitor. The camera channel to be
viewed can be changed using the On Screen Display (OSD) menu.
To use camera 4 as an automatic rear view camera the user can power it from
the vehicle’s reverse lights (i.e. when the reverse lights come on, the camera will b
e displayed on the monitor automatically)
Playback in the Vehicle
Recorded files can be played back in the car (using an optional monitor).
SD Memory Card Format
Remove the power first. Press and hold the [PLAYBACK] & [RECORD] button an
d then connect the power.
Press and hold the [PLAYBACK] & [RECORD] for more than 2 seconds after boo
ting. Then SD card initialization (formatting) process will start.
Once complete, all video & log files will be deleted and the configurations will defa
ult to the factory settings.
10
NOTE: The unit will not start recording immediately after the power is turned on.
It takes around 1 minute for the built-in power backup system to charge. Thereafter, the
internal flash memory will be ready to record.
NOTE: Smart Witness Analysis Software is pre-loaded on the SD card. Please ensure y
ou have installed the software to your PC before you format the card
