Smart-M EZW-UH4 Manual de usuario

EZW-UH4

Ultra 2x2 HD Video Wall Processor

USER MANUAL

Designed and Manufactured in the USA

1-800-284-2131

www.smartavi.com

Ultra HD Video Wall Processor 2

OVERVIEW

INTRODUCTION______________________________________________________________________________

FEATURES___________________________________________________________________________________

WHAT’S IN THE BOX?________________________________________________________________________

TECHNICAL SPECIFICATIONS________________________________________________________________

OPERATION CONTROLS AND FUNCTIONS___________________________________________________

REMOTE CONTROL__________________________________________________________________________

RS232 CONTROL_____________________________________________________________________________

NETWORK CONTROL________________________________________________________________________

SAFETY INSTRUCTION_______________________________________________________________________

TROUBLESHOOTING_________________________________________________________________________

TECHNICAL SUPPORT________________________________________________________________________

LIMITED WARRANTY STATEMENT____________________________________________________________

7-8

9-12

Thank you for purchasing this product

Surge protection device recommended

For opmum performance and safety, please read these instrucons carefully before connecng,

operang or adjusng this product. Please keep this manual for future reference.

This product contains sensive electrical components that may be damaged by electrical spikes, surges,

electric shock, lighng strikes, etc. Use of surge protecon systems is highly recommended in order to

protect and extend the life of your equipment.

Ultra HD Video Wall Processor 3

Introduction

Features

This product is a HDMI 2.0 Video Wall controller with 2 HDMI input, 2 HDMI loop out and 4 HDMI

scaling out for video wall processing. With WEB UI and Remote Control to control the product for

dierent wall display.

• HDMI 2.0 and HDCP 2.2 compliant

• Support mul-resoluon up to 3840 x 2160 @ 60 Hz video output for video wall

• Support 2 channels HDMI loop out

• Support RS-232 and TCP/IP control

What’s in the box?

PART NO. Q-TY DESCRIPTION

EZW-UH4-S 1 Ultra HD Video Wall Processor

PS12VDC3A 1Power Adapter

1User Manual

Ultra HD Video Wall Processor 4

Technical Specifications

VIDEO & AUDIO

HDMI Compliance HDMI 2.0

HDCP Compliance HDCP 2.2/1.4

Input Video Formats 3840 x 2160p @ 24/25/30/50/60Hz; 1080p @ 24/25/30/50/60Hz

Audio Format 2.0 channel, 5.1 channel, LPCM, Dolby, AC3, DTS

CONTROL

RS-232 Baud rate: 115200, data bit: 8, Stop bit: 1, no parity

OTHER

ESD Protecon Human-body Model: ±8kV (Air-gap discharge) , ±4kV (Contact discharge)

Power PS12VDC3A

Dimensions 12.57” W x 1.76” D x 6.69” H

Weight 4.4 lbs

Operang Temperature 0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature -20°C ~ 70°C / -4°F ~ 158°F

Relave Humidity 10%~50% RH (non-condensing)

Ultra HD Video Wall Processor 5

Operation Controls and Functions

1 2 3

# NAME DESCRIPTION

1Input Buons Port input selecon

2Output Buons Port output selecon

3Mode Buons Mode selecon

SELECTING INDIVIDUAL MONITOR DESCRIPTION

Input 1 -> Output 1 - 4 -> SINGLE Display Input 1 on selected Output

Input 2 -> Output 1 - 4 -> SINGLE Display Input 2 on selected Output

SELECTING 1X2 WALL

Input # -> Output 1 -> WALL Display Input # as a 1X2 wall using Output 1 + 2

Input # -> Output 2 -> WALL Display Input # as a 1X2 wall using Output 3 + 4

SELECTING 2X1 WALL

Input # -> Output 3 -> WALL Display Input # as a 2X1 wall using Output 1 + 3

Input # -> Output 4 -> WALL Display Input # as a 2X1 wall using Output 2 + 4

SELECTING 2X2 WALL

Input # -> WALL Display Input # as a 2X2 wall using all Outputs

SET RESOLUTION

SINGLE + WALL

While in Wall Mode for Input 1 or Input 2: Pressing SINGLE + WALL

together for the rst me will set the resoluon to 1920 x 1080

@ 60Hz Let go and press SINGLE + WALL together again will bring

the resoluon back to 3840 x 2160 @ 60 Hz

# NAME DESCRIPTION

1Input HDMI signal input ports, connect to HDMI source device such as DVD or PS4 with HDMI cable

2Loop Out HDMI signal loop out ports. Loop out HDMI A/B signal to downstream

3Outputs HDMI signal scaling output for video wall

4 RS232 RS232 control command

5 LAN CAT5/5e/6

612V/3A DC 12V/3A power supply port

REAR PANEL

FRONT PANEL

1 2 3 4 5 6

Ultra HD Video Wall Processor 6

REMOTE CONTROL

The EZW-UH4 supports IR control to manage inputs and video wall sengs. Using the included

remote, the instrucons are as follows:

SELECTING INDIVIDUAL

MONITOR DESCRIPTION

1 -> Input 1 - 4 -> OK Display Input 1 on Output 1-4

2 -> Input 1 - 4 -> OK Display Input 2 on Output 1-4

SELECTING 1X2 WALL

1 -> SW/SP -> 1 Display Input 1 as a 1X2 wall using Output 1 + 2

1 -> SW/SP -> 2 Display Input 1 as a 1X2 wall using Output 3 + 4

2 -> SW/SP -> 1 Display Input 2 as a 1X2 wall using Output 1 + 2

2 -> SW/SP -> 2 Display Input 2 as a 1X2 wall using Output 3 + 4

SELECTING 2X1 WALL

1 -> SW/SP -> 3 Display Input 1 as a 2X1 wall using Output 1 + 3

1 -> SW/SP -> 4 Display Input 1 as a 2X1 wall using Output 2 + 4

2 -> SW/SP -> 3 Display Input 2 as a 2X1 wall using Output 1 + 3

2 -> SW/SP -> 4 Display Input 2 as a 2X1 wall using Output 2 + 4

SELECTING 2X2 WALL

1 -> SW/SP -> OK Display Input 1 as 2X2 wall using all Outputs

2 -> SW/SP -> OK Display Input 2 as 2X2 wall using all Outputs

CLEAR ALL STITCHING

Exit Removes all stching and returns each Output to

Single Mode

Ultra HD Video Wall Processor 7

RS232 CONTROL

The EZW-UH4 can be controlled via RS232 to manage input and video wall sengs. Once connected

to a PC, launch your preferred RS232 console. The baud rate connecon will need to be set as 115200

bps. If the RS232 connecon is established before boong up the device, the UI should display the

following:

USING THE MENU

The help menu can be displayed by sending the “//?” command which will prompt the following:

Ultra HD Video Wall Processor 8

RS232 CONTROL (continued)

All menu commands must be sent with “// ” followed by the appropriate command.

HOTKEY DESCRIPTION

//? Display Help menu

//A1 or //A2 Change audio to Input 1 or Input 2

//B Reboot the device

//OA1 or //OA2 Sets all Outputs to Input 1 or Input 2

//HDCP Enables HDCP content

//Omn Set Input n to Output m

//Cm Clear select Output of stching

//CA Clear all Output stching

//CH1 Clear Output 1 + 2

//CH2 Clear Output 3 + 4

//CV1 Clear Output 1 + 3

//CV2 Clear Output 2 + 4

//H1n Set Input n as 1X2 wall using Output 1 + 2

//H2n Set Input n as 1X2 wall using Output 3 + 4

//V1n Set Input n as 2X1 wall using Output 1 + 3

//V2n Set Input n as 2X1 wall using Output 2 + 4

//Wn Set Input n as 2x2 wall using Output 1-4

//Rmz

Set resoluon of Output m to resoluon z where:

Z: 1 – 3840x2160 @ 60 Hz

Z: 2 – 1920x1080 @ 60 Hz

Ultra HD Video Wall Processor 9

NETWORK CONTROL

The EZW-UH4 can also be controlled via IP to manage input and video wall sengs. To nd the IP, visit

our website at hps://smartavi.com/helpful-links/. Download and open the IP-Finder 2 soware. Once

launched, click on “Search Device”. This will display the device under Device IP. Use the IP displayed on

your IP-Finder 2 on your preferred web browser. We highly recommend Google Chrome for the best

compability.

Ultra HD Video Wall Processor 10

NETWORK CONTROL (continued)

The EZW-UH4 will have several pages of navigaon: Matrix Switch, TV Wall, and Sengs. The default

landing page will display the Matrix Switch page. TV Wall can be navigated by click on “TV Wall” on the

top right side. Sengs can be opened on the top le side with the triple lines in the purple box.

The Matrix Switch page can be used to quickly change individual inputs and outputs for video, loop,

and audio. Note: Loop Output 1 and Loop Output 2 only aect the Loop 2/MAIN output. Loop 1 will

always display Input 1.

Tabla de contenidos

Otros manuales de Convertidor de medios de Smart-M

Smart-M

Smart-M EZW-UH9 Manual de usuario

Smart-M

Smart-M V2V Series Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario