Smart Cam A12VT Manual de usuario

Speakers Tracking Camera

Quick Start Guide

User Manual V1.0

SmartCam A12VT

SAFETY NOTES -IMPORTANT

The following important notes must be followed carefully to run the camera and

respective accessories in total safety. The camera and relative accessories are called

video system in this section.

Before installing the camera, please read this manual carefully. Please follow installation

instructions indicated in this manual during installation. Please keep this manual for future use.

The installation should be performed by qualified service personnel or system

installers in accordance with all local rules.

Before powering on the camera, please check the power voltage carefully. Make sure that you

are using the correct power source.



Please put the power cable, video cable and control cable in safe place.

 Do not operate the camera beyond the specified temperature and humidity. Working

temperature range of the camera is between 0℃ and +40℃. The ambient humidity range is less

than 90﹪.



During transporting, avoid violent shake or force to the camera.

 To prevent electric shock, do not remove screws or housing of the camera. There are no

self-serviceable parts inside. Refer to qualified service personnel for servicing.

 Video cable and RS232 cable should be kept far away from other cables. Shielded and

independent wiring is necessary for video and control cables.

 Never aim the lens of the camera at the sun or other extremely bright objects. Otherwise, it may

cause damage.

 When cleaning the camera, please use soft cloth. If the camera is very dirty, wipe it off gently

with a soft cloth moistened with a weak solution of water and a neutral kitchen detergent. Wring

all liquid from the cloth before wiping the camera, then wipe off all remaining dirt with a soft, dry

cloth. Use lens cleaning paper to clean the lens.

Do not move the camera head manually. In doing so would result in malfunction of the camera.

Do not hold the camera head when carrying the video camera.



This camera is for indoor use only. It is not designed for outdoor use.



Make sure the camera is not directly exposed to rain and water.

 Make sure the camera is far away from area where radiation, X-rays, strong electric waves, or

magnetism is generated.

Warnings

1.If you need to extend the power cable, please extend the power cable from the part on

above below picture (220V/110V), do not extend from part 1 on above picture (DC12V),

otherwise it will cause unexpected damage to the device.

2. To prevent infringement of the rights of others, please confirm that it is installed and used

within the scope permitted by local law!

CONTENTS

ABOUT THE PRODUCT -----------------------------------------------------------------1

QUICK GUIDE ----------------------------------------------------------------------------------------1

FEATURES ------------------------------------------------------------------------------2

CHARACTERISTICS & FUNCTIONS ---------------------------------------------------------------------2

APPLICATION SCENARIOS -----------------------------------------------------------------------------3

MAIN PARTS & INTERFACES --------------------------------------------------------------------------3

LIST OF PARTS & ACCESSORIES -----------------------------------------------------------------------5

INSTALLATION -----------------------------------------------------------------------5

DESKTOP MOUNT INSTALLATION ---------------------------------------------------------------------5

WALL MOUNT INSTALLATION -------------------------------------------------------------------------6

DIP SWITCHES SETTINGS -----------------------------------------------------------------------------7

REMOTE CONTROLLER --------------------------------------------------------------------------------7

SETTING --------------------------------------------------------------------------------9

SOFTWARE CONNECTION -----------------------------------------------------------------------------9

PARAMETERS SETTING -----------------------------------------------------------10

SETTING PROCESS------------------------------------------------------------------------------------10

PARAMETER SETTING --------------------------------------------------------------------------------10

CMS APPLICATION SOFTWARE GUIDE ---------------------------------------14

NETWORK CONNECTION -----------------------------------------------------------------------------14

CLIENT SOFTWARE INSTRUCTION -------------------------------------------------------------------17

MENU SETTINGS --------------------------------------------------------------------29

MENU CONFIGURATION ------------------------------------------------------------------------------29

MENU EXPLANATION --------------------------------------------------------------------------------32

VIDEO ------------------------------------------------------------------------------------------------33

EXPOSURE ------------------------------------------------------------------------------- ------------33

COLOR ------------------------------------------------------------------------------------------------34

PAN/TILT/ZOOM --------------------------------------------------------------------------------------34

SYSTEM -----------------------------------------------------------------------------------------------35

STATUS -----------------------------------------------------------------------------------------------35

RESTORE DEFAULTS ---------------------------------------------------------------------------------35

LIST OF SPECIAL PRESET COMMANDS --------------------------------------------------------------36

ANNEX 1 TECHNICAL SPECIFICATIONS ---------------------------------------37

ANNEX 2 SIZE AND DIMENSION -----------------------------------------------39

TROUBLESHOOTING ---------------------------------------------------------------40

ABOUT THE PRODUCT

Quick Guide

The camera can be accessed and

controlled via the following ways:

Client software iSmartCMS: tracking setting,

camera search and control, network setting.



VLC: watch the camera four streams;

 IE: camera image preview, camera control,

network setting;

 SDK: provide secondary development kits

for the connecting and controlling of

camera;

 Onvif: version 2.1 supported

Name: admin

Initial password: 123456

 Network pass-through: recommended

connection mode with recording or

streaming device.

CMS

Refer to detailed instructions in page 14 of this

user manual.

Rtsp

1 Make sure PC and the camera are in the

same LAN.

2 Three channel stream url: rtsp://IP/chx, x=1,

2, 3. 1 & 3 stream tracking camera image, 2

stream full view camera image.

3 IP address is acquirable through

CMS, default rtsp port is 554.

1 Make sure PC and the camera are in the same

LAN.

2 Input IP address+ port number 88 (port

numbers fixed to 88) in the IE address bar:

http://IP:88, such as

http://192.168.18.229:88

3 Install plug-in;

4 Name: admin Initial password: Null;

5 Support Windows 7 or above operation

system, whereas Windows XP is not

supported.

SDK

Disk comes with camera includes:

SDK_Demo: SDK development sequence;

SDK_Doc: instruction of SDK connection;

SDK_Lib: SDK Library. SDK only provides

image acquiring, PTZ controlling and etc,

tracking configuration is not included.

Network Pass-Through

On the tracking parameters setting page,

the IP address, port and connection protocol

(TCP/UDP) of the recording or streaming

device can be configured. After connected,

the camera can be controlled by the standard

VISCA protocol. Recording or streaming

device can achieve audio & video of the

camera through rtsp or rtmp.

FEATURES

The speakers tracking camera helps to

achieve intelligent meeting experience,

implemented with both audio positioning

and intelligent video analysis technologies. It

can automatically switch between tracking

view and full-view view to frame the

speaker(s). It frees of camera operation during

a meeting and enables meeting attendees to

focus more on discussion.

Characteristics & Functions

1/2.8”Exmor CMOS,2MP;

12x optical zoom, up to 72.5° Fov;

Simultaneously output 3G-SDI,HDMI,

Ethernet, Up to 1080p60 resolution;

Support H.264/H.265 video compression;

Implemented with both audio positioning,

body detection and recognition technologies.

It can precisely frame the speakers;

Automatically switch between close-up image

for speaker(s) and wide-angle image for all

attendees;

Built-in image switch rules according to actual

meeting scenes.

Application Scenarios

Main Parts & Interfaces

Camera

Front View

1 Camera 1 (Default Address 1) 2

Camera 2 (Default Address 2) 3

IR Indicator

4 Power Indicator

5 Full View Camera 1

6 Full View Camera 2

Rear View

7 DIP Switch

8 Ethernet

9 Ref Audio

10 Line In

11 USB (Reserved) 12

HDMI

13 HD-SDI

14 RS-232

15 Power(DC12V) 16

On/Off

Tabla de contenidos

Otros manuales de Cámara IP de Smart Cam

Smart Cam

Smart Cam IP Cam w Manual de usuario

Smart Cam

Smart Cam IP cam Manual de usuario

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario