SLIDE SF-206 Manual de usuario
Please read this manual before use.
Visit us at
www.slideusa.com
or contact us at
FITNESS TRACKER
SF-206
Manual
SAFETY WARNING
•Please charge the Fitness
tracker with the provided
charging clamp for at least
two hours prior to its first use.
PRODUCT OVERVIEW
1__
2___________
___
3a._________
3b.________
4
1. Fatigue Monitor
2. Touch Sensor
3a. Charging Contacts
3b. Charging Contacts
4. Charging Clamp
__
GETTING STARTED
Powering On/Off: Power the fitness
tracker On/Off, by touching and
holding the touch sensor.
Charging: The fitnesses Tracker
comes with its own USB compatible
charger. To charge the device
plug the USB charging clamp into
a USB slot. Then clamp the fitness
tracker into the charger.
Note: Make sure that the charging
contacts on the clamp and the
fitness tracker are aligned.
DETACHABLE WRISTBAND
This device comes with a detachable
wristbands. To remove the wristband
locate the metallic pin on the edge of
the wristband where it meets the
watch. Pull the pin sideways and the
wristband will automatically detach
from the watch.
________ Pin
Touch Sensor: Available functions
will be shown on the screen and
can be navigated through by
simply touching or touching and
holding the touch sensor under the
screen.
Downloading The App: To use the
SF-206 as
intended the
user should
download the
Lefun Health
app using the
provided QR
code.
Note: If the App is not downloaded
some features of the device may
not be usable.
Enabling All features: Before first
use, the user should enable all
features of the device. This is done
while in the Health section by
navigating to the menu in the
top left side of the screen and
selecting both Band Function
Settings and Message Reminder.
1. Open the Lefun Health App
and while in the Health
section navigate to the
menu in the top left side of
the screen and select Device
Name/Connection Status.
2. The user will be asked to
provide Lefun Health
permission to access several of
the phone's features. For the
Fitness Tracker to operate as
intended the user should allow
the device all permissions.
3. While on the pairing page the
user will see all devices
compatible with the Lefun
Heath app listed. If the user
does not see their fitness
tracker they should take the
following steps.
A. Make sure that the fitness
tracker is powered on.
B.. Press t
B. Press the search button
to begin scanning for a signal.
4. Select the fitness tracker from
the available list to pair.
Pairing Instructions: To pair the
Fitnesses tracker and the user's
phone follow the below instructions.
Menu __
•Smart Alarm - After the alarm is
set the watch will vibrate at the
appointed time.
•Message Notification - The fitness
tracker will vibrate when the
user's phone receives a message
or call. Note: This feature must be
turned on manually.
Restore factory Settings: To restore
factory settings touch and hold the
touch button while on the "About"
page of the fitness tracker. The user
will see a prompt saying "Long Press
Restore Factory Settings." To confirm
the reset touch and hold the touch
sensor again. The fitness tracker will
then automatically restore itself to
factory settings.
MENU SETTINGS
Menu Features: The fitness tracker
has several features that can be
changed on the app by navigating
to the health page and selecting
the menu option in the top left side
of the screen. These features
include but are not limited to,
•Search Device: The user can
locate the lost fitness tracker
(make it vibrate) by selecting this
option.
•Shake For A Selfie: Select this
feature to access the camera on
the user's phone. Next, shake the
fitness tracker to take a photo.
Note: Photos will be saved on the
user's phone.
•Band Function Settings:
A. Sedentary Reminder: The
fitness tracker will
automatically provide the user
a warning should they remain
sedentary for too long.
B. Reminder for drinking: The
fitness tracker will
automatically provide the user
with a reminder to drink water
at regular intervals.
C. Screen Up Upon Raising:
Quickly view the time or
messages without tapping the
screen or pressing the
multifunction button. To use it
just turn your wrist towards you
and the screen will be
displayed for a few seconds.
D. Smart Anti-lost: Turn On/Off
Smart Anti Lost Setting.
Note: The following features may
not work as intended if the user
has not turned them on.
WATERPROOFING
Your Fitness tracker is water-
resistant, rain-proof, splash-proof
and can stand up to even the
sweatiest workout.
NOTE: Do not swim or shower with
your wristband. Though water
won't damage the device, it
should be dried thoroughly after
coming into contact with any
water.
While on the Home Screen of the
device touch the touch sensor to
FEATURES
Pedometer:
Records the
number of steps the
user is taking during
a 24 hour period.
This information is
accessible on both
the fitness tracker
navigate through the available
apps.
Exercise: Records
the amount of time
the user has
exercised. Note: The
time exercised is
reset to zero at
midnight. Note: The
user can select
between the
and the app. Note: The step counter
is reset to zero at midnight.
Home
Screen:
press and
hold the
touch sensor
to switch
between the available home
screen displays as shown above.
STEPS
10325
103
83
Heart rate monitor:
Measures the
wearer's current
resting heart rate
and displays that
data as the number
of heartbeats per
SPO2 Test: Measures
the amount of
oxygen in the blood
(sp02) Note: data
not recorded in the
app.
Blood Pressure:
Measures the
wearer's current
Blood pressure. Note:
Normal Blood
pressure is 120/80.
minute (BPM). Note: Data will be
saved in the app
1. Running
2. Badminton
3. Climbing
4. Bicycling
following four exerciser options.
99
87
131
99
Tabla de contenidos
