Slate RAVEN MTX Manual de usuario

RAVEN&MTX&DIGITAL&PERFORMER&USER&MANUAL&&&&&&

MTX

DIGITAL PERFORMER USER GUIDE & BATCH COMMAND SYSTEM MANUAL

RAVEN Version 3.0.0

Updated 10/24/2015

RAVEN&MTX&DIGITAL&PERFORMER&USER&MANUAL&&&&&&

Updated 10/24/2015

Contents

IMPORTANT SAFETY NOTES BEFORE YOU START&................................................................&3!

WARRANTY INFORMATION&....................................................................................................&6!

MAINTENANCE AND CARE&.....................................................................................................&8!

Cleaning the RAVEN MTX!....................................................................................................................................................................!8!

Revitalizing the RAVEN MTX Glass!.................................................................................................................................................!9!

GETTING STARTED&..............................................................................................................&12!

System Requirements!.........................................................................................................................................................................!12!

RAVEN MTX Dimensions!.....................................................................................................................................................................!13!

Software Installation & Touch Calibration!.............................................................................................................................!14!

Connecting RAVEN MTX to Digital Performer!....................................................................................................................!22!

Launching RAVEN MTX Software!...................................................................................................................................................!24!

INSTALLING RAVEN MTX FOR DIGITAL PERFORMER&..........................................................&24!

Setting Up & Aligning Digital Performer with RAVEN!...................................................................................................!24!

RAVEN MTX DIGITAL PERFORMER SOFTWARE FEATURES&..................................................&25!

The RAVEN Mixer!...................................................................................................................................................................................!25!

RAVEN Channel Strip!...........................................................................................................................................................................!26!

Icons!.............................................................................................................................................................................................................!27!

RAVEN Toolbar!........................................................................................................................................................................................!30!

RAVEN Settings!.......................................................................................................................................................................................!42!

Saving a Digital Performer Session!..............................................................................................................................................!47!

Saving a RAVEN Session!.....................................................................................................................................................................!47!

Restoring to Factory Default!..........................................................................................................................................................!49!

Edit Window!.............................................................................................................................................................................................!50!

WORKING WITH PLUGINS&..................................................................................................&50!

Loading Plugins:!.....................................................................................................................................................................................!50!

Controlling Plugins:!.............................................................................................................................................................................!52!

BATCH&COMMAND&SYSTEM&FOR&DIGITAL&PERFORMER&.........................................................&53!

RAVEN&MTX&DIGITAL&PERFORMER&USER&MANUAL&&&&&&

Important Safety Notes Before You Start

This symbol indicates that dangerous voltage constituting a risk of electric shock is

present within your RAVEN MTX.

This symbol indicates there are important operating and maintenance instructions

in the literature accompanying your RAVEN MTX.

1. Read these instructions.

2. Keep these instructions.

3. Regard all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Do not block any ventilation openings. Install in accordance to the

manufacturer’s instructions.

7. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

8. Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

device.

RAVEN&MTX&DIGITAL&PERFORMER&USER&MANUAL&&&&&&

9. Only use attachments/ accessories specified by the manufacturer.

10. Unplug this apparatus during lightning storms or when unused for long

periods of time.

11. Do not press strongly on the panel with a hand or sharp object such as a

pencil, pen, or nail.

12. Do not stick metal objects or conductive material in the device, power

chord, or power inlet.

13. Make sure you connect the earth ground wire to prevent electric shock. A

cable with a three-pronged grounded AC Plug must be connected to a three-

pronged AC outlet.

Power Source

Operate your RAVEN MTX only from the power source included.

Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It

will take a minimum of two people to move your RAVEN MTX, although three are

recommended.

Servicing

Servicing of the RAVEN MTX is to be done by qualified service personnel only. To

reduce the risk of electric shock, do not perform any servicing other than that

contained in the operating instructions unless you are qualified to do so.

Damage Requiring Service

Unplug the device from the power outlet and refer servicing to qualified service

personnel under the following conditions:

•When power supply is damaged

•If liquid has been spilled or objects have fallen into the RAVEN MTX.

•If your RAVEN MTX has been exposed to rain or water.

•If your RAVEN MTX has been dropped or damaged in any way.

•When your RAVEN MTX exhibits a distinct change in performance.

RAVEN&MTX&DIGITAL&PERFORMER&USER&MANUAL&&&&&&

Important Note About DVI Cables & Display

As in many studios, your computer may be located in a room far away from your

console. For DVI cable lengths over 15ft, a DVI signal booster is required. This will

ensure the video signal reaches the display with no signal degradation.

Additionally, when switching sources between DVI and HDMI for the display, you must

press the center button of the remote, or the source button on the OSD board behind

the meter access panel.

You must wait a full 6 seconds before the source will change.

Also there is no RGB input for the MTX. Although it will show as a source, it should be

ignored. It will take around 14 seconds to switch to the RGB source, just be patient

and move on to DVI when the RGB source is selected.

RAVEN&MTX&DIGITAL&PERFORMER&USER&MANUAL&&&&&&

Warranty Information

Hardware Limited Warranty

A. Limited Warranty

Slate Media Technology (SMT) warrants that its hardware will be free from defects in

materials and workmanship, for one (1) year after it has been acquired by the first

user when given normal, proper and intended usage. SMT will repair or replace

nonconforming product (or a component thereof) that is returned to SMT within the

warranty term at no charge.

This warranty applies to products purchased anywhere in the world. You may have

additional consumer rights under local laws. SMT will provide the minimum warranty

term required by applicable law.

B. Warranty Recipient

The limited warranty applies only to genuine SMT products when sold by an SMT

reseller, distributor or dealer.

C. Exclusions from Warranty

This warranty does not cover problems caused by your acts, the acts of others, or

events beyond SMT’s reasonable control.

SMT does not warrant that use of SMT products will be uninterrupted or error-free.

This limited warranty does not apply to expendable components and is void if the

product serial numbers have been removed. SMT has no obligation under this

warranty to repair or replace products damaged as a result of 1) normal wear and

tear, 2) improper or unauthorized use or repair, 3) customer fault or negligence, 4)

natural or manmade disaster, or 5) causes external to the products including, but not

RAVEN&MTX&DIGITAL&PERFORMER&USER&MANUAL&&&&&&

limited to, exposure to moisture, extreme temperatures, power outages, or other

customer site conditions.

D. Limitation On and Exclusion of Damages for Breach of Warranty

You may recover from SMT and its suppliers only direct damages up to the amount you

paid for the product.

You cannot recover for loss of present or prospective profits, data loss, business

damage, or any other consequential, special, indirect or incidental damages.

E. Warranty Procedures

For information regarding your warranty, please contact Slate Media Technology or

your local authorized reseller, distributor, or dealer. Product registration at

www.slatemt.com is required in order to process a warranty claim. You will be

required to provide proof-of-purchase to validate your claim.

Hardware may require return-to-factory, and customer is responsible for properly

packing and labeling and insuring any warranty returns for shipment to Slate Media

Technology. Customer is responsible for any damage or loss incurred due to improper

packaging or labeling. Customer is required to pay shipping/handling one way for

warranty product returns and applicable custom duties, V.A.T. and other associated

taxes and charges for international service.

RAVEN&MTX&DIGITAL&PERFORMER&USER&MANUAL&&&&&&

Maintenance And Care

Cleaning the RAVEN MTX

The RAVEN MTX ships with a Revitalizer spray that used a NanoGlide™ coating, which

protects the screen from oil, water, and dirt. The coating also strengthens the surface

of the glass making it scratch resistant and smooth to the touch.

IMPORTANT

Do not use regular cleaning solutions on the RAVEN MTX.

Household sprays and cleaners will affect the touch glass coating, which can impact

performance. We recommend a simple microfiber cloth to clean the surface of the

glass.

If more intensive cleaning is required, use a lightly damp cloth. Make sure that the

cloth is not too wet; the coating will make the water bead and drip. As a precaution,

keep a dry cloth at the bottom of the screen to catch any runoff.

Do not allow moisture from liquids to accumulate on the screen when cleaning.

Accumulation of liquids can damage internal electrical devices. If a damp cloth

must be used, make sure to remove any excess water immediately after cleaning.

To clean RAVEN MTX’s exterior metal parts use a simple microfiber cloth. If deeper

cleaning is required, a non-abrasive cleaning solution can be used on the metal parts

only. Be sure to not spray cleaner on the RAVEN MTX directly, rather spray the

cleaner on to a cleaning cloth away from the RAVEN MTX, then use the dampened

cloth on the RAVEN MTX’s metal parts.

The high gloss lacquer finish on RAVEN MTX’s side panels can be damaged by some

cleaners. Use a gentle cleaning solution. Test in an inconspicuous area first.

RAVEN&MTX&DIGITAL&PERFORMER&USER&MANUAL&&&&&&

Revitalizing the RAVEN MTX Glass

The RAVEN MTX comes out of the box with a NanoGlide™ coating that repels oil,

water, and leaves the surface incredibly smooth to the touch.

After some use, it may be necessary to revitalize to bring the glass back to its original

slickness. We recommend using the revitalizing solution when you feel the glass has

substantially more friction than when you first started using your RAVEN MTX.

The coating process is very easy and can be done following the steps below. All you

need is a microfiber cloth and the supplied 4oz bottle of Revitalizer/Protector

solution.

IMPORTANT

Apply the revitalizer solution in a well-ventilated area.

NOTE:

The Revitalizer Solution is not a product of Slate Media Technology. Please read the

Revitalizer label for more information, precautions, and first aid instructions.

RAVEN&MTX&DIGITAL&PERFORMER&USER&MANUAL&&&&&&

1. Using a microfiber cloth, clean the RAVEN MTX screen to remove dust and

fingerprints.

2. Spray the revitalizer solution directly onto the RAVEN MTX glass. It should take

approximately six sprays to cover the glass completely.

IMPORTANT

Do not spray so much that the solution drips down the screen. Excess

moisture could damage the display and touch system. If you are unsure,

place a cloth at the bottom of the screen to catch any runoff.

Otros manuales para RAVEN MTX

Tabla de contenidos

Otros manuales de Mezclador de música de Slate

Slate

Slate RAVEN MTi Manual de usuario

Slate

Slate RAVEN MTX Manual de usuario

Slate

Slate RAVEN MTi Manual de usuario

Manuales populares de Mezclador de música de otras marcas

Neve

Neve 8816 Manual de usuario

Mackie

Mackie Onyx Analogue Mixer Manual de usuario

Behringer

Behringer EUROPOWER PMP518M Manual de usuario

Peavey

Peavey S-32 Sanctuary Series Manual de usuario

Rane

Rane MP 4 Manual de usuario

True

True T9 Touchscreen Console Manual de usuario

Studiomaster

Studiomaster Air Pro 24 Manual de usuario

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manual de usuario

Roland

Roland M-160 Manual de usuario

Yamaha

Yamaha MR1642 Manual de usuario

Ecler

Ecler MAC40v Manual de usuario

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manual de usuario

Veeder-Root

Veeder-Root TLS-350 Series Manual de usuario

Alto

Alto APM80.QUAD Manual de usuario

Omnitronic

Omnitronic PM-211 Manual de usuario

SoundCraft

SoundCraft B400 Manual de usuario

Roland

Roland SoundCanvas SC-8820 Manual de usuario

CARVIN

CARVIN RX 1200 Manual de usuario