SL ZERO EDGE PRO Manual de usuario
INSTALLERS: PLEASE BE SURE TO LEAVE THIS
MANUAL WITH THE OWNER. THANK YOU!
ZERO EDGE PRO
Owner’s Manual
ZERO EDGE PRO
3
Screen Innovations warrants its products, to the original purchaser only, to be
free from defects in materials and workmanship for a period of one (1) year from
the date of purchase by the original purchaser provided they are properly oper-
ated according to Screen Innovations’ instructions and are not damaged due to
improper handling or treatment after shipment from the factory.
This warranty does not apply to equipment showing evidence of misuse, abuse,
or accidental damage, or which has been tampered with or repaired by a person
other than authorized Screen Innovations personnel.
Screen Innovations’ sole obligation under this warranty shall be to repair or to
replace (at Screen Innovations’ option) the defective part of the merchandise.
Returns for service should be made to your Screen Innovations’ dealer. If it is
necessary for the dealer to return the screen or part to Screen Innovations,
transportation expenses to and from Screen Innovations are payable by the
purchaser and Screen Innovations is not responsible for damage in shipment. To
protect yourself against damage or loss in transit, insure the product and prepay
all transportation expenses.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES AS TO FITNESS FOR USE AND MERCHANT ABILITY. Any implied warranties of tness
for use, or merchantability, that may be mandated by statute or rule of law are limited to the one (1)
year warranty period. This warranty gives you specic legal rights, and you may also have other
rights, which vary from state-to-state. NO LIABILITY IS ASSUMED FOR EXPENSES OR DAMAGES
RESULTING FROM INTERRUPTION IN OPERATION OF EQUIPMENT, OR FOR INCIDENTAL, DIRECT, OR
CONSEQUENTIAL DAMAGES OF ANY NATURE.
In the event that there is a defect in materials or workmanship of a Screen Innovations product, you
may contact our Sales Partners at 9715-B Burnet Road Suite 400, Austin, TX 78758, (512) 832-6939.
IMPORTANT: THIS WARRANTY SHALL NOT BE VALID AND SCREEN INNOVATIONS SHALL NOT BE
BOUND BY THIS WARRANTY IF THE PRODUCT IS NOT OPERATED IN ACCORDANCE WITH SCREEN
INNOVATIONS’ WRITTEN INSTRUCTIONS.
Keep your sales receipt to prove the date of purchase and your original ownership.
LIMITED ONE YEAR WARRANTY
ON SCREEN INNOVATIONS PRODUCTS
APPLY S/N
STICKER HERE
?
512-832-6939
SCREENINNOVATIONS.COM
9715-B Burnet Road Suite 400, Austin,TX 78758
ZERO EDGE PRO
54
ZERO EDGE PRO SUGGESTED PROJECTOR PLACEMENT
11°
11°
SCREEN
Better
Best
Good
36”-42”
(91cm - 106cm)
Table of Contents
SUGGESTED PROJECTOR PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
STANDARD FRAME PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
STANDARD FRAME ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
SPLIT FRAME PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SPLIT FRAME ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LED LIGHTS ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
BLACK DIAMOND OR SHORT THROW ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
SLATE OR PURE ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
BLACK BACKER ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
MAESTRO ATTACHMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BLACK BACKER ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
SMALL TRIM ATTACHMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
MEDIUM OR LARGE TRIM ATTACHMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
LOGO ATTACHMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
TRIM REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
WALL INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
FLOWN INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
IR LIGHTING HEX CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
IP CONTROLLED LIGHTING SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
7
STANDARD
6
ZERO EDGE PRO
SPLIT
STANDARD 7
12
PRE ASSEMBLED 39
STANDARD FRAME PARTS LIST
2X
1X
Hardware Kit
1X
1X
2X
2X
(LED Lights Only)
Wall Brackets Mounting
Screws
4X
1/4-20 x 1/4’’
Screws
(Small trim only)
4X Thin Corner
Brackets
4X Thick Corner
Brackets
1/8’’ & 5/32’’
Hex Keys
Bungees
(Maestro only) SI Attachment Bands
(Black Diamond and Short
Throw Only)
4X Gloves
1/2’’ Small trim
option
1 1/2’’ or 2’’
trim option
Acrylic Logo
98
STANDARD STANDARD
Flying Mount Only
2X Flown Ceiling
Mount
2X Flown
Cable
LED Remote
LED IR Controlled Only
2X Flown Screen
Mount
If IP controlled LED lights are ordered, Phillips Hue hub must be purchased
and set up separately. See page 46 for IP lighting Instructions.
1
2
Thin Bracket
Thick Bracket
Insert the thin corner brackets into the outside channels and the thick corner brackets
into the inside channels of the vertical frames. Then slide into the channels in the
horizontal frames.
STANDARD FRAME ASSEMBLY
1110
STANDARD STANDARD
4
3
Make sure the points on the frame pieces line up. Then nger tighten 2 of the set screws
to lock in the corners.
6
5
A = B
A B
18 20
LED
Measure the diagonals to check if frame is square. If one diagonal is longer then push
on the corners at that diagonal. Tighten all set screws once the diagonals are equal to
within 1/8’’.
NOTE: If using AT or Maestro material then check to make
sure the channel nuts are installed in the inner channel
before proceeding.
1312
SPLITSPLIT
SPLIT FRAME PARTS LIST
1X 1X
1X 1X
2X
2X 2X
2X
1X
Hardware Kit
1X
(LED Lights Only)
Wall Brackets Mounting
Screws
12X
1/4-20 x 1/4’’
Screws
(Small Trim Only)
4X Thin Corner
Brackets
4X Thick Corner
Brackets
4X Gloves
4X
1/4-20 Wing nuts
4X
1/4-20 Thumb
Screws
2X Vertical
Support
Brackets
1/8’’ & 5/32’’ or
3/32’’ Hex Keys
1/2’’ Small trim
option
1 1/2’’ or 2’’
Trim option
Acrylic Logo
Flying Mount Only
2X Flown Ceiling
Mount
2X Flown
Cable
LED Remote
LED IR Controlled Only
2X Flown Screen
Mount
If IP controlled LED lights are ordered, Phillips Hue hub must be purchased
and set up separately, see page 46 for IP lighting Instructions.
Bungees
(Maestro only)
SI Attachment
Bands
(Black Diamond and
Short Throw Only)
1514
SPLITSPLIT
1
2
Thin Bracket
Thick Bracket
Insert the thin corner brackets
into the outside channels and
the thick corner brackets into the
inside channels of the vertical
frames. Then slide into the
channels in the horizontal frames.
SPLIT FRAME ASSEMBLY
3
4
Slide the horizontal frame pieces together and secure with the splice bars. Then attach
the vertical support to the frame as shown.
NOTE: If using AT or Maestro material then check to make
sure the channel nuts are installed in the inner channel
before proceeding.
1716
SPLITSPLIT 7
8
A = B
A B
18 20
LED
Measure the diagonals to check if frame
is square. If one diagonal is longer then
push on the corners at that diagonal.
Tighten all set screws once the diagonals
are equal to within 1/8’’.
5
6
Make sure the points on the frame pieces line up. Then nger tighten 2 of the set screws
to lock in the corners.
ZERO EDGE PRO
1918
ZERO EDGE PROLED LIGHTS ATTACHMENT
1
Connect the lighting harness
with the included screws to
the nuts in the frame piece
with the lights attached to it.
NOTE: Steps 1 and 2 will have already been completed if possible to be shipped that way.
If so skip to step 3.
Plug in the lights to the
controller plugs.
2
If IP controlled LED lights are ordered, Phillips Hue hub must be purchased
and set up separately, see page 50 for IP lighting Instructions.
3
Cut the light strips at the copper pad as indicated to
the correct length such that they just overlap at the
middle of the top frame piece. DO NOT cut the light
strips at any other location.
+12V
B
G
R
+12V
B
G
R
CUT HERE
Press in the lights to the channel on the frame. Do not crease the lights at the corners.
Tabla de contenidos
