SKYSHL SS413F Series Manual de usuario

Shenzhen SKYSHL Technology Co.,Ltd.

Version:V2020.08

CATALOGUE

Overview

……………………………………………… 1

2.Product specifications ………………………………… 1

3.Main components of fusion splicer……………………… 3

4.Common Operating Interface Description ……………… 5

5.Power supply ………………………………………… 6

6.Cleaning operation before splicing ……………………… 8

7.Regular maintenance…………………………………… 9

8.Basic Splicing Procedures …………………………… 11

ARC Calibration

…………………………………… 14

10.

Manually adjust the fiber position

……………………15

11.Cutting Length of Optical Fiber……………………… 18

12.

Common troubleshooting

…………………………… 18

Appendix A:Warranty period and conditions ……………20

Overview

Thank you for choosing our products. This operation outline mainly

introduces the product performance, basic operation steps and maintenance of

optical fiber fusion machine, which is newly produced by our company.

The machine adopts a high-speed image processing technology and special

precision positioning technology. The whole processes of fiber fusion splicing

can be automatically completed within 9 seconds. Provided with TFT color

LCD display, the screen is protected by high strength protective

panel. User-friendly graphical interface is convenient for efficient and

quick operation by the user. High performance battery can realize online

charging continuously in the work, to get a longer battery life. No manual arc

calibration operation is needed.

The machine has real time splice arc control and correction functions. In

extreme environment, the machine can also effectively ensure the splice

quality of optical fiber. The machine is featured with fast splice speed, less

splice loss, light weight, portable, applicable to backbone network,

metropolitan network and FTTH project. In order to complete accurately the

splice operation, please read carefully this user's manual.

(SS413F Video: youtu.be/llfhWtie48c)

Product specifications

Applicable optical

fibers

SM (G.652 & G.657), MM (G.651), DS (G.653), NZDS (G.655) and

user-defined optical fibers

Splice loss

0.02dB (SM),0.01dB (MM),0.04dB(DS/NZDS)

Return loss

Better than 60dB

Control

technology

Real time splice arc control and correction; Self adaptive in working

environment scope; Electrode oxidation self adaptive.

Splicing time

≤9 seconds (standard SM).

Heat time★

≤25 seconds (The Heat time can be set and the heater temperature can be

adjusted.); Fast heat

function, functions of automatic or manual heating selection.

Splicing function

Step-by-step splicing or automatic splicing optional

Fiber alignment

Fine alignment, fiber core alignment, clad alignment, manual alignment

Fiber diameter

Cladding diameter 80 ~ 150μm,

Coating diameter 100 ~ 1000μm

Cleave length

Coating less than 250μm: 5 ~ 16 mm; Coating 250 ~ 1000μm: 16 mm.

Tension test

Standard 2N (optional)

Magnification

times★

320 times (X-axis or Y-axis);

160 times (X-axis and Y-axis).

Remarks：

①The technical data in the above table“★”are different for different

types of products.

②Detailed technical indicators of the product should be consulted and

obtained with the sales staff of the company.

Fiber clamp

Multifunctional clamp is applicable to bare fiber, tail fiber, jumper,

covered fiber and stealth fiber. The clamp meets the requirement of

industry standard FTTH fusion quick splicer.

Heat-shrink sleeve

60mm/40mm/20mm and a series of micro- shrink sleeves (some

features are optional)

Display

★

Provided with TFT color 4.3 LCD display. The screen is protected by

high strength protective panel. Contents (image) can be flipped, easy

for two-way operation.

External Interface

USB2.0 Interface: convenient data download, USB flash disk

upgrade software.

Splicing mode

100 groups user mode, 53 groups factory mode.

Heater mode

40 groups user mode, 11 groups factory mode.

Connection storage

Built-in memory is capable to save latest 10000 splices.

Store 100 groups of splice images (X, Y fiber splicing images).

Electrode life

> 5500 times (times of arc).

Lithium battery

★

Continuous splicing, heating more than 350 times (typical

environment).

Power saving

function

In “Power Save Mode" Under typical

circumstances can save 15% battery power

Power supply

★

Lithium battery provides 12.5V power (charging in 10.8V) and can

be charged continuously when the splicer works. When the charging

time 3.5, the battery charging times are not less than 300 times.

(Charging) Power adapter: Input AC100-240V 50/60HZ, Output

DC13.5V/4.8A. The present power mode can be identified, real-time

monitoring the present battery capacity.

Work environment

Operating environment: -10～+50℃; Storage temperature:- 40 ~ +

60℃;Humidity: <95% RH

(non-condensing); Operating altitude: 0 ~5000m

Maximum wind speed: 15m / s.

External

dimension★

133(Length)*163(Width)*140(Height)

Weight ★

1.6 kg (Batteries not included)

3．Main components of fusion splicer

3.1 Name of main components of fusion splicer

Left fiber clamp

Heating groove

Heater right press plate

Heater transparent window cover

Heater left press plate

3.2 Descriptions of the keypad of fusion splicer

Right fiber clamp

V-groove

Electrode

Buttons of keypad I Buttons of keypad II

Remarks:

①Keypad layout is different for different model fusion splicer of this series, each

button mark and their functions are listed in the table above.

②The "blue" text on the table above is the button functional description of

keyboard Ⅱ.

Boutton

Readiness

Manual mode

Automatic

mode

Parameters menu

Power switch

Moving cursor

Upward movement of fiber

Invalid

Increasing the amount of

parameters/moving cursor

Downward movement of

fiber

Invalid

Reducing the amount of

parameters/moving cursor

Leftward movement of fiber

Invalid

Reducing the amount of

parameters/moving cursor

Rightward movement of

fiber

Invalid

Increasing the amount of

parameters/moving cursor

Invalid

Return to readiness screen

Return to

readiness

screen

Return to higher level menu

screen

Invalid

Confirming option

function/Parameter modification

Enter splice

mode menu

Open the function to move

motor by buttons at pause

Invalid

Enter lower level menu

/operation screen

Start splicing

Continue forward

/Start splicing

Start splicing

Invalid

Start splicing

Continue forward

/Start splicinge

Start splicing

Confirming option

function/Parameter modification

Invalid

Motor reset

Invalid

Motor reset/Return to higher

level menu

Motor

reset/Return to

higher level

Return to standby screen/Higher

level menu

Heater Switch

Invalid

Next step / arc

Invalid

4. Common Operating Interface Description

●Top right corner of the screen :Indicating "Heater" is "warming up" at

current.

●Bottom of screen :Indicating "Keypad operation"

on current screen.

4.3【Heater mode】 4.4【Arc Calibration】

4.2【Splice options】4.2.1【Operation Options】

●Top right corner of the screen :Indicating the present power supply mode of

"power adapter".

4.1 Standby Interface of fusion splicer (Level 1 Menu)

5.1 Starting up:

Hold down button;

When the LED indicator on the keypad is changed to green,release button.

5.2 Shutdown:

Hold down button. After the LED indicator on the keypad is changed

from green to red, release button.

5.3. Power supply

5.3.1 Power adapter power supply(no need to install lithium batteries)

Adapter AC input

●Only AC power cord attached to the adapter is used, and

the input voltage is AC100-240V 50-60HZ.

●The grounding terminal of AC power line input must be grounded

effectively。

Adapter DC output

●Use only the DC power cord attached to the adapter.

●Output voltage: DC13.5V 4.8A

●Insert DC power cord into the "POWER INPUT" port at the bottom of

splicer. The splicer supplies power to the adapter.

4.5【Maintenance】 4.6【Settings】

5. Power supply

②Different battery configurations correspond to different charging modes.

●Use only AC power cord attached to the adapter, input voltage:AC100-

240V 50/60HZ.

●The grounding terminal of AC power line input must be grounded

effectively.

●Insert DC power cord attached to adapter "POWER INPUT" at the

bottom of splicer Input port, the splicer will start one charging process of

secondary lithium batteries.

Charging of batteries

●Charging indicator lamp is red; after charging, Charging indicator Lamp

Turn green.

●When the power is off, the charging time is up to 3hours, 30minutes,

40minutes and the battery is surplus. The amount of capacity determines

the length of charging time.

Battery maintenance

●Please store lithium batteries in a cool, dry and safe environment.

●Do not place the lithium battery near high temperature, flammable and

explosive gases or liquids.

●If the lithium battery needs to be stored for a long time (more than one

month), it is recommended to charge it to 40%-60%, and the storage time

should be charged 1 to 2 times a month.

5.3.2 Lithium battery power supply

①The random lithium batteries are correctly connected to the bottom of the

splicer (power module), that is to realize the power supply of lithium

batteries in the splicer.

●Please use the special charger provided by our company for the lithium

battery.

●Do not short circuit the positive and negative electrodes of the lithium

battery, otherwise it will cause burns and explosion.

●Please use the standard lithium battery supplied by SKYSHL for the fusion

splicer, please do not use other lithium batteries not supplied by our

company.

●Do not disassemble the lithium battery privately.

●Do not hit the lithium battery strongly.

5.3.3 Low voltage alarm (battery-powered)

This model fusion splicer has "low voltage alarm" function.When the

lithium battery (group) power is below a certain value,the fusion splicer

screen will show "low battery!!!" warning window as shown below. At

this point, the user should promptly use the power adapter or charge the

lithium battery, or hold down button to turn off the fusion splicer.

Otherwise, it will shut down automatically after about 30 seconds.

6. Cleaning operation before fusion

Cleaning V-groove（Youtube Video:https://youtu.be/P6qsIM3S-D4）

Clean the bottom of the V-groove with a wet cotton swab dipped in

absolute ethanol. Use a dry cotton swab to absorb the residual anhydrous ethanol

in the V-shaped tank. Use a clean, cut, fiber-optic end to remove dirt.

Otros manuales para SS413F Series

Tabla de contenidos

Manuales populares de Sistema de soldadura de otras marcas

Berner

Berner PLASMACUT 54 Manual de usuario

Pro Spot

Pro Spot PR-155 Manual de usuario

Forney

Forney 210 Manual de usuario

Thermal Arc

Thermal Arc 400S Manual de usuario

Lincoln Electric

Lincoln Electric HANDYMIG 170I Manual de usuario

GYS

GYS PROTIG 201 AC/DC Manual de usuario

TAFA

TAFA 30*8B35 Manual de usuario

Lincoln Electric

Lincoln Electric INVERTEC V350-PRO CE Manual de usuario

ESAB

ESAB Buddy Arc 145 Manual de usuario

CIGWELD

CIGWELD 636804 Guía rápida

Red-D-Arc

Red-D-Arc DC-400 Manual de usuario

Hobart Welding Products

Hobart Welding Products Spool Gun DP 3035-10 Manual de usuario

Elettro

Elettro HI-MIG 3000 SYNERGIC Manual de usuario

WIA

WIA Weldmatic 270 CP132-2 Manual de usuario

Sonics

Sonics H520T Manual de usuario

Miller

Miller Big Blue 400D Manual de usuario

NewArc

NewArc RT2000 Guía de inicio rápido

Hypertherm

Hypertherm powermax1000 Manual de usuario