Self-test mode
● Enter self-test mode only when DMX signal is disconnected or lost.
● Short press M key, when display L-1~L-5, enter self-test mode.
● Press ◀ or ▶ key to change mode number(L-1L-5).
● Self-test mode include four channel light up separately or synchronously.
● Short press M key, when display 001~999, enter DMX mode.
● Press ◀ or ▶ key to change DMX decode start address(001~999),
long press for fast adjustment.
● If there is a DMX signal input, will enter DMX mode automatically.
● DMX Dimming: Each D4-P/D4-E DMX decoder occupy 4 DMX address
when connecting the DMX console.
For example, the defaulted start address is 1,
their corresponding relationship in the form:
DMX mode
(001~999)
Operation
DMX mode
(L-1~L-5)
Self-test mode
Dimming curve
100
90
80
70
60
50
40
30
20
10
PWM duty(%)
50 60 70 80 90 100
Brightness(%)
10 20 30 40
Gamma=1.6
CH1 0-255
CH2 0-255
CH3 0-255
CH4 0-255
CH1 PWM 0-100% (LED R)
DMX Console DMX Decoder Output
CH2 PWM 0-100% (LED G)
CH3 PWM 0-100% (LED B)
CH4 PWM 0-100% (LED W)
D4-P, D4-E 4 Channel Constant Voltage DMX512 & RDM Decoder
User Manual Ver 1.0.2 www.iskydance.com Page 3
