SKY-HERO AT9 Manual de usuario
1
Quick start
Guide Up -> Normal
Mid -> Stabilise
Down -> GPS
Fail safe
( Down = RTH )
Return to home
Flight mode:
Signal power level:
Nose down
Nose up
Throle up
Throle down
Tilt le Tilt right
Nose turn le Nose turn right
Low Mid Hight
Your model is equiped with a DJI NAZA V2 ight controller.
All sengs are done from factory.
Only NAZA leveling and magnetometer calibraon is needed.
Please read and follow the NAZA user manual,
to familiarise to all foncons ( link ).
2
Pre ight check
Verify your propeller orientaon and secure them rm in place.
Please read and refer to your Lile Spyder user manual p: ( 16, 25, 26 )
Use only fresh charged baery in your transmier.
Check your signal transmier power level.
Make a rst 5 min ight, land and check motor temperature.
Check if no screw is coming loose.
Recharge your baery.
Max ight me should be 8’ 30’’
You can program a mer and alarm on your TX, refer to your AT9 user manual
We recommend to not exceed 8 min
To garantee good baery life me
naza v2: hp://download.dji-innovaons.com/downloads/nazam-v2/en/NAZA-M_Quick_Start_Guide_v1.26_en.pdf
Lipo baery user: hp://www.instructables.com/id/Lithium-Polymer-Equee
Lile spyder: hp://sky-hero.com/usermanuals/User-Manual-Lile-Spyder.pdf
User manuals:
Tabla de contenidos
