Skip-Line SC-12 Manual de usuario
Skip-Line®
Road Marking & Monitoring Equipment
Leading the industry since 1972.
10514 N. McAlister Road, La Grande, OR 97850
Phone: 541-963-0111
Email: [email protected]
Website: www.skipline.com
Stay up to date with the latest news from Skip-Line, including best practices,
support issues, and product announcements by signing up for the Skip Time™
newsletter at: http://skipline.com/skip-time
PRELIMINARY DRAFT
Last modified: 12/15/19
Skip-Line® is a registered trademark of Skip-Line, Inc., for pavement marking controls and related products and services.
SC-12 Road Marking Control System - Installation and Operation Manual
2
SC-12 Road Marking Control System - Installation and Operation Manual
3
After calibration of your system, use the following table to note your truck specific
settings.
MENU
Value
Vehicle ID (Not a menu item)
Footage Cal #
Yellow Pump Cal #
White Pump Cal #
Left Air Offset
Left Yellow Offset
Left White Offset
Left Bead Offset
Right Air Offset
Right Yellow Offset
Right White Offset
Right Bead Offset
SC-12 Road Marking Control System - Installation and Operation Manual
4
i. Warnings, Warranty, and Disclaimer
WARRANTY
Each unit of the SC-12 system is covered by a 30-day money-back guarantee.
Buyer is responsible for determining suitability of this product for intended
application prior to engaging in any contract that would rely on product
functionality.
This product is also covered by a limited one year warranty. Products with
defects in workmanship will be repaired or replaced at the sole discretion of
Skip-Line, Inc. without charge for up to one year from date of invoice.
DISCLAIMER
All electronic equipment is subject to failure due to: Unanticipated use,
non-compatibility of accessories, stress by mechanical vibration, electrical spikes,
exposure to intermittent, poorly regulated, highly inductive, or noisy power
sources, overload, temperature extremes, induced load-dump and welding
currents, insulation chafing, improper wiring, poor cable routing, or stressed
mounting. Indiscriminate high-pressure washing can cause moisture intrusion
and corrosion.
All computerized systems can fail. Skip-Line, Inc. will not be held
responsible or liable for any loss as a result of the use of this device,
including but not limited to loss of time, money, opportunity, or personal
injury. In no case shall Skip-Line, Inc. be responsible beyond the
purchase price of this product.
IMPORTANT NOTE
Not all SC-12 units have exactly the same appearance, functionality, or graphical
style. Some graphics contained in this manual may show patterns, functions, or
features that are not installed on every unit and should not be relied upon for
operational decisions. This system depends on the proper operation, calibration,
and functionality of other devices in the Skip-Line product line. Full functionality
may require purchase of further devices.
Contents of this manual are subject
to change without notice.
If your system lacks a feature found in this manual that you would like
to have added, contact Skip-Line to see if it is possible.
SC-12 Road Marking Control System - Installation and Operation Manual
5
SC-12 Road Marking Control System - Installation and Operation Manual
6
Table of Contents
i. Warnings, Warranty, and Disclaimer 5
Overview 10
Unit Descriptions 11
Optional Units 12
Specifications 13
Installation 14
Preparing the installation 14
Physical Installation 14
Cabling 15
Menu System 16
General Navigation 16
Menu Bar Navigation 17
Action Screen Navigation 17
Main Screen 18
Main Screen Parameters 18
Pattern Selector 18
Stripe 19
Cycle 19
Bead Extend 19
Bead Offset 19
Pattern Preview 20
Rate Indicators 20
Feature Status Indicators 21
Status Indicators 21
Information System 22
Quick Setup 23
Mode 23
SC-12 Road Marking Control System - Installation and Operation Manual
7
Bead Guns 23
AutoCycle 24
Midspot 24
Index 24
Counter Channel Menu 24
Pattern Counter Channels 27
Setup 27
System 28
General 28
Datum 28
Speed Range 29
Life Totals 29
Gun Setup 30
Gun Colors 30
Gun Widths 30
Gun Offsets 31
Gun Delays 31
Guided Calibrations 33
Distance 33
Pump 35
Extras 36
Marker Layout 36
Black Patterns 38
Help 41
Switch Test 41
Input Test 42
Button Test 42
About 43
Other Menus 44
Splash Screen 44
USB Menu 44
Side Configuration 44
SC-12 Road Marking Control System - Installation and Operation Manual
8
Demo Mode 45
Additional Features 48
Paper-Tape Printing 48
Datum Point 49
The Bead Registration Concept 49
Datum Point Correction 50
Tandem Beads 52
In-Field Software Updates 52
Menu Messages 53
Message Icons 53
Message Descriptions 54
Master Box Switches 57
Appendix A: Glossary 58
Appendix B: Making a Communications Cable 59
Appendix C: Repairs Form 60
SC-12 Road Marking Control System - Installation and Operation Manual
9
1. Overview
The Skip-Line SC-12 Road Marking Vehicle Control System is a comprehensive,
networked control system for road marking vehicles. In addition to controlling
road marking application and glass bead guns, the SC-12 can control most
aspects of the entire vehicle, including hydraulic and pneumatic pressures,
temperature controls, material application rates, lights, actuators, and more.
Some features covered in this manual may or may not have been included in
your system. See your system-specific documentation. If your system lacks a
feature in this manual and you would like to have it added, contact
Skip-Line to see if it is possible.
The SC-12 system is comprised of a network of core devices. At a minimum, the
devices required for this core system are:
Core Skipper
Front Hub and Rear Hub
At least one Master Control Box
Many optional devices are available also, and development on this system is
on-going with new features added frequently. Currently, the following optional
features are available:
Additional Master Control Boxes
Video Guidance & Overlay
Switch Panel Boxes
SC-12 Glass Cockpit
RPM Inputs
Pulse Counter Inputs
Proportional (Analog) Inputs
Proportional (Analog) Outputs
Thermocouple Input Box
Bi-Directional Motor Outputs
Camera Controls
Light Controls
Arrow & Variable Message Board
Controls
There are several items that require attention before the first use of the system.
Before connecting to road marking equipment, read all warnings in the
preface of this manual. Ensure the system will be installed in a manner
that will not expose it to parameters outside those described in the
specifications.
Before applying power for the first time, double check connections. Mis-wiring
can cause damage.
SC-12 Road Marking Control System - Installation and Operation Manual
10
Otros manuales para SC-12
2
Tabla de contenidos
Otros manuales de Sistema de control de Skip-Line
