Skimz SM110 Manual de usuario

ModelRecommendedFeedinletØ ReturnoutletpipeØ FoamOutletØ DrainoutletØ

 feedpump(max)hose(mm)(mm)hose(mm)hose(mm)

SM110500l/hrEheim12/1632‐‐

SM150800l/hrEheim16/2240‐‐

SM1801200l/hrEheim16/2250‐‐

SM2001500l/hrEheim19/2750‐‐

SM2502000l/hrEheim19/2750Eheim16/22Eheim16/22

SM3003000l/hrEheim19/2763Eheim16/22Eheim16/22

Specifications and equipment are subjected to change without prior notice or obligation on the part of the manufacturer.

Design Reg. no. D2008/977/D

Warranty Policy

Skimz Aquatics (Company) warrants this product to the original purchaser against defective material and

workmanship that occurs during normal use of the body for two (2) years and one (1) year warranty on the pump.

Company will, at Company’s option, either repair or replace without charge.

Products Covered by Warranty

All Skimz equipment is covered by warranty from the date of purchase

To be effective, register your product at: www.skimz.sg.

Exclusions:

• Damage resulting from accident, misuse, lack of reasonable care, subjecting the product to abnormal

working conditions or any other failure not resulting from defects in materials or workmanship.

• Damage caused by tampering, modification or attempted repair by anyone other than the Company.

• Transfer of product to someone other than the original purchaser.

Deliver, mail or ship the product, together with a copy of the purchase receipt or other evidence of purchase to:

Skimz Aquatics

5 Ang Mo Kio Industrial Park 2A

#04-30 AMK Tech II

Singapore 567760

You must pay any postage, shipping charges, insurance costs and other expenses to return the product to Skimz

Aquatics. However, if the necessary repairs are covered by the warranty, Company will pay the return shipping

charges.

Warranty Information

Maintenance

It is recommended to clean the pumps every 3 months. Check and clean the impeller, and if

necessary soak the pump and impeller in white vinegar to dissolve any calcium deposits.

Technical Data

Protein Skimmer Quick Guide

SM110 / SM150 / SM180 / SM200 / SM250 / SM300

SKIMZ AQUATICS

skimz.sg [email protected]

Professional

Protein Skimmers

Page 2

Step 1

1. Make sure all o-rings are in correct

position.

2. Attach the Aquabee skimmer pump

according to the diagram.

3. When screwing the pump, do not tighten

the coupling too much.

Step 2

1. Connect the air tube to the pump air inlet.

2. Then connect the air tube to the air intake

valve.

3. Larger Monzter skimmers using AquaBee

5000 pumps are fitted with silencer SS-5.

A. Lid for collection cup

B. Collection cup

C. Neck

D. Twist-lock fitting

E. Air intake valve

F. Skimmer body

G. Feed pump inlet

H. Air tube

I. AquaBee skimmer pump

J. Pump air inlet

K. Valve for feed pump

L. Feed pump

M. Outlet pipe

N. GF water outlet valve

Page 3

Step 3

1. Measure the require length of the outlet

pipe.

2. Cut to the length of the pipe slightly above

the sump water level (ideal position is at

the water surface).

3. Connect the outlet pipe as shown in the

diagram.

4. It is recommended to run the outlet over a

sponge to remove any stray bubbles.

Step 4

1. The recirculating skimmer should be

provided with water from the aquariums

either by a separate feed pump or by

gravity feed.

2. Choose a suitable pump and connect it to

the inlet with a flexible hose.

3. It is recommended to fit a ball valve on the

outlet of the feed pump to achieve better

adjustment of the skimmer water level.

Step 5

1. Open the water outlet valve and plug the

pumps to the power supply.

2. Allow the skimmer to be filled with water

until it overflow from the outlet pipe.

3. Adjust the skimmer water lever by using

the water outlet valve.

4. Set the air intake valve to 2 o’clock position

and leave it to settle down for a day or so

(initial break-in period). When foam

formation begins after break-in period, fine

adjustment to the skimmer can be done via

adjustment of air intake valve and water

outlet valve for optimum performance.

Este manual sirve para los siguientes modelos

Otros manuales de Filtro de piscina de Skimz

Skimz

Skimz HANGON H-SERIES Manual de usuario

Skimz

Skimz Oval D Series Manual de usuario

Manuales populares de Filtro de piscina de otras marcas

Davey

Davey PoolSweepa FloorCova Manual de usuario

Jandy

Jandy DEL Series Manual de usuario

ProMinent

ProMinent DULCODOS Manual de usuario

Hayward

Hayward Perflex Manual de usuario

TMC Aquarium

TMC Aquarium V2Skim Pro Manual de usuario

Swim & Fun

Swim & Fun PRO CLASSIC basic Manual de usuario

Swim & Fun

Swim & Fun EASY SALT Manual de usuario

SMC Networks

SMC Networks SMC20TA-2500 PPM Manual de usuario

T.I.P.

T.I.P. SPF 180 Manual de usuario

Waterway

Waterway Clear Water II Manual de usuario

Steinbach

Steinbach S1 Manual de usuario

EHEIM

EHEIM 350 Manual de usuario

Davey

Davey EcoPure DEP2140 Manual de usuario

JUWEL Aquarium

JUWEL Aquarium EccoSkim Manual de usuario

POLYGROUP LIMITED

POLYGROUP LIMITED SFS600 Filter System with F600C Pump Manual de usuario

Pentair Pool Products

Pentair Pool Products Filter CFW Series Manual de usuario

Oase

Oase Skimmer 250 Manual de usuario

Oase

Oase CrystalSkim 350 Manual de usuario