SKILTEC 5A Dibujo dimensional
ROLLER BLINDS
WITH EDGE
TECHNOLOGY
PRODUCT INFORMATION MANUAL
SECTION: 5A ROLLER BLINDS WITH EDGE TECHNOLOGY
PRODUCT INFORMATION MANUAL
SECTION: 5A ROLLER BLINDS WITH EDGE TECHNOLOGY
ISSUE DATE: JANUARY 2018 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2016 APPROVED BY: K.FUESSEL PAGE 3 OF 50
HUNTER DOUGLAS ROLLER BLINDS WITH EDGE TECHNOLOGY
INTRODUCTION
Introducing Hunter Douglas Roller Blinds with patented EDGE Technology, our roller blind hardware system
developed by an international design team specifically for our requirements.
Featuring a sleek architectural design with smooth operation and unrivalled inner strength, EDGE technology
allows you to span even the largest window beautifully. Highly durable hardware delivers smooth and reliable
operation.
PRODUCT INFORMATION MANUAL
SECTION: 5A ROLLER BLINDS WITH EDGE TECHNOLOGY
ISSUE DATE: JANUARY 2018 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2016 APPROVED BY: K.FUESSEL PAGE 4 OF 50
EDGE FEATURES & BENEFITS
Can be operated using either standard
chain drive or motorised technology.
The durable standard chain drive is
available in two ratio mechanism 1:1 and
1:1.75. The standard 1:1.75 ratio enables
a heavier blind to be lifted without the
need for a spring booster. However, you
can nominate to use the optional 1:1 ratio.
It is also aesthetically pleasing in one size
format for a consistent look throughout
the home.
Universal spring loaded idle ends provide
for smooth and easy installation.
The aluminium tube has been engineered
to perform well with minimal deflection
over large expanses.
SMOOTH AND LIGHT OPERATION
• Hardware components are available
in four colour options – White, Black,
Grey and Magnolia.
• All brackets are universal in design
which means the operating side
can be changed simply on site if
required.
• Two bracket sizes are available,
38mm and 55mm which ensures
the correct bracket can be selected
for challenging installations and
maximises the drop capacity.
• Brackets are available with slim line
end caps which are recommended
for all face fit installations.
OUTER BEAUTY
PRODUCT INFORMATION MANUAL
SECTION: 5A ROLLER BLINDS WITH EDGE TECHNOLOGY
ISSUE DATE: JANUARY 2018 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2016 APPROVED BY: K.FUESSEL PAGE 5 OF 50
LIVING WITH INNOVATION
• Two compact dual bracket designs are available:
- The standard (under) roll configuration ensures the
blind skin can be fitted close to the window.
- The reverse (over) roll configuration provides a self
pelmet effect. Both dual brackets can be installed
with either same side or opposite end controls and
have universal mounting options.
• An optional patented integrated levelling device
makes it easy to adjust shades after mounting.
• Two standard linking systems are available:
- The standard connector set minimises the
intermediate gap on linked configurations.
- The optional aligner link maximises flexibility during
installation with a fine adjustment option for aligning
the level of the blinds.
• Both linking options have 15 degree play. This
provides an allowance for slightly misaligned
installations.
• An independent linking option is available for
configurations that require multiple operation.
• A 45 and 90 degree linking mechanism is also
available for bay and corner windows.
• A sleek (84mm projection) and contemporary head
box and fascia system are available in both an
anodised and powder coated finish (white, black or
magnolia) with colour coded endcaps.
• Both the head box and fascia system can be installed
in both reveal and face fit positions and have a snap
lock cover and plastic outlets for easy installation and
quiet operation.
• To obtain room darkening, the head box system can
be installed with side channels, available in matching
powder coated colours (white, black or magnolia) or
anodised finish.
Standard Dual Roller
Linked Blinds
Headbox System
PRODUCT INFORMATION MANUAL
SECTION: 5A ROLLER BLINDS WITH EDGE TECHNOLOGY
ISSUE DATE: JANUARY 2018 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2016 APPROVED BY: K.FUESSEL PAGE 6 OF 50
SUPERIOR DESIGN
Introducing Hunter Douglas Heavy Duty Roller Blinds with patented EDGE technology, a new heavy duty roller
blind hardware system developed by Hunter Douglas.
The new modular system is designed to allow for larger blind widths, featuring a 65 mm tube with the strength to
allow for widths up to 3.8 metres and drops up to 5.5 metres.
PRODUCT INFORMATION MANUAL
SECTION: 5A ROLLER BLINDS WITH EDGE TECHNOLOGY
ISSUE DATE: JANUARY 2018 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2016 APPROVED BY: K.FUESSEL PAGE 7 OF 50
EDGE LiteRise Roller Blinds
Cordless operating system for clean aesthetics and Child Safe Solution
Hunter Douglas are continuously at the forefront of innovative technology, child safety and on-trend designs, providing the ideal
balance between style and functionality. The new Edge LiteRise Roller Blind is the latest introduction into the existing array of cordless,
child safe options in the Hunter Douglas range of window coverings.
The Edge LiteRise Roller Blind operating system features a unique spring mechanism that allows for integrated and granular control of
the shade, allowing you to raise and lower the shade stopping at any desired position.
Unlike traditional Spring Operated Roller Blinds, the intuitive Edge LiteRise Roller Blind is raised and lowered by hand at the bottom rail
for smooth light operation.
Similar to Duette®LiteRise Shades, the patented design means no cords, ease of operation and instinctive control.
EDGE LiteRise Roller Blinds are available across the range of fabrics and Sunscreens.
PRODUCT INFORMATION MANUAL
SECTION: 5A ROLLER BLINDS WITH EDGE TECHNOLOGY
ISSUE DATE: JANUARY 2018 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2016 APPROVED BY: K.FUESSEL PAGE 8 OF 50
Ease Of Operation
Unlike traditional spring operated roller blinds, the
Edge LiteRise Roller Blind does not require a pull
to engage the spring when raising of the shade is
required. Traditional spring operated roller blinds
are known for their tricky engagement and potential
to accelerate away during operation.
The Edge LiteRise Roller Blind provides the
consumer with a precise method of operation
allowing for the ultimate in light and privacy control.
The patented spring mechanism allows for intuitive
operation. This means that the Roller Blind can be
precisely positioned anywhere along the drop and
hold its position.
Simply push up to raise and pull down to lower.
Clean aesthetics and
balanced light gap
The Edge LiteRise Roller Blind has an even and
balanced light gap of approx 11mm providing
improved aesthetics, minimising light streaming in
from the outside.
The absence of a chain and chain tensioner
provides a clean and uncluttered appearance at
the window.
Ideal Child Safety Solution
The patented design eliminates the cords
providing increased safety for children and pets
whilst creating an uncluttered look at the window.
EDGE LiteRise Roller Blinds - continued
PRODUCT INFORMATION MANUAL
SECTION: 5A ROLLER BLINDS WITH EDGE TECHNOLOGY
ISSUE DATE: JANUARY 2018 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2016 APPROVED BY: K.FUESSEL PAGE 9 OF 50
ARCHITRAVE & REVEAL
OUTSIDE FACE
WIDTH -0
DROP -0
TO
SILL
-0
PAST
SILL
-0
TO
FLOOR
-0
WIDTH -0
MIN WIDTH +130
90mm
+90
EDGE ROLLER BLINDS - measuring guide
PRODUCT INFORMATION MANUAL
SECTION: 5A ROLLER BLINDS WITH EDGE TECHNOLOGY
ISSUE DATE: JANUARY 2018 ORIGINATOR: SKILTEC
REPLACES ISSUE DATE: NOVEMBER 2016 APPROVED BY: K.FUESSEL PAGE 10 OF 50
NOTE: FOR WINDOWS IN REVEAL BRACKETS
MUST BE CEILING FIXED.
FRONT EDGE
ON FACE
BACK EDGE
Corners in Reveal- Front Edge Deductions
Through Blind +50mm(from corner)
Butt Blind - 0mm
Corners in Reveal- Back edge Deductions
Through Blind - 0mm
Butt Blind - 60mm
Corners on Face Deductions (Butt Blinds)
38mm Projection bracket - 75mm
55mm Projection Bracket - 90mm
FACE FIT
CEILING FIT FRONT EDGE OF REVEAL
Angled Link Corners on Face
Measure Blinds into the corner and deduct 76mm from each blind.
Angled Link Corners in reveal
Measure from the front edge of reveal and deduct 10mm from each blind.
In all corner linked situations we strongly recommend that the brackets are fixed in
exact location first and then measured outside edge to outside edge of the bracket
to ensure the gap is minimised.
MEASURE WALL
Brackets to be fixed to wall
CEILING FIT FRONT EDGE
OF REVEAL
FACE FIT
Angled Link Bay on Face Deductions
38mm Projection Bracket - 38mm - 76mm - 38mm
55mm Projection Bracket - 43mm - 86mm - 43mm
Angled Link Bay in Reveal Deductions
Front Edge of Reveal - 10mm - 20mm - 10mm
Corners
ON FACE
TOP FIX FRONT EDGE
TOP FIX BACK EDGE
Bays in Reveal Deductions
Front Edge of Reveal - 0mm - 0mm - 0mm
Back Edge of Reveal - 22mm - 44mm - 22mm
Bays on Face Deductions
38mm Projection Bracket - 28mm - 56mm - 28mm
55mm Projection Bracket - 33mm - 66mm - 33mm
Bays
Angled Linked Blinds - Bay Window
Angled Linked Blinds - 90° Corners
EDGE ROLLER BLINDS - measuring guide
Tabla de contenidos
Otros manuales de Persiana de ventana de SKILTEC
Manuales populares de Persiana de ventana de otras marcas
Domondo
Domondo PureNight Manual de instrucciones de instalación
rollease acmeda
rollease acmeda Easy Spring Air Guía de configuración
IKEA
IKEA KADRILJ Manual de usuario
Hallis Hudson
Hallis Hudson Rolls Super glide Manual de usuario
Benthin
Benthin P1614 Manual de usuario
MV LINE
MV LINE CLARA 015 Manual de instrucciones
