SNB-B24 BANDSAW MANUAL
6
6/2016
4. DO NOT USE IN HAZARDOUS OR DANGEROUS ENVIRONMENTS. Do no operate
machine in damp, wet locations or where any flammable or noxious fumes may
exist. Keep work area well lit.
5. KEEP CHILDREN, VISITORS and PETS AWAY. All children, visitors and pets should be
kept away and at a safe distance from work area. Make workshop child or pet proof
with padlocks, master switches and by removing starter keys.
6. DO NOT FORCE MACHINE. Machine will work safer at the rate in which it is designed
when not forced to operate.
7. USE THE RIGHT EQUIPMENT. Do not force machine or attachment to do a job for
which it is not designed.
8. WEAR PROPER SAFETY APPAREL. Do not wear loose clothing, gloves, neckties, rings,
bracelets or other jewelry which may get caught in moving parts. Non-slip footwear
is recommended. Wear protective hair covering.
9. ALWAYS USE SAFETY GLASSES. Also use a face or dust mask if work area is dusty.
Everyday eyeglasses only have impact resist lenses and they are NOT safety glasses.
10. SECURE WORK. Use clamps or a vise to hold work when working. It is safer than
using your hands and frees both hands to operate the machine.
11. DO NOT OVERREACH. Keep proper footing and balance at all times.
12. MAINTAIN MACHINE WITH CARE. Keep parts sharp and clean for safer performance.
Follow instructions for lubricating and changing accessories.
13. USE RECOMMENDED ACCESSORIES/PARTS. Use of improper accessories may cause
risk of injury.
14. RISK OF UNINTENTIONAL START. Always disconnect from power source before
adjusting or performing any maintenance. Make sure the switch is in the OFF
position before reconnecting.
15. KICKBACK. Many woodworking machines can “kickback” the work piece towards the
operator. Know what conditions can create “kickback” and learn how to avoid them.
16. DMAGED PARTS. Before further use of a part, guard or other part that is damaged,
check carefully to determine if it is able to operate properly and perform its
intended function. Check for alignment of moving parts, binding of moving parts,
broken parts, mounting or any other conditions that may affect its operation. A part
that is damaged should be replaced.
17. NEVER LEAVE THE MACHINE RUNNING OR UNATTENDED. TURN POWER OFF. Do not
leave the machine until it comes to a complete stop.
18. NEVER OPERATE THE MACHINE WHEN TIRED, OR UNDER THE INFLUENCE OF DRUGS
OR ALCOHOL. Full mental alertness is required at all times when running a machine.
