SNB-PX24 PLANER MANUAL
4
6/2016
2. OPERATION AND SAFETY
1. Keep doors closed and all the tools and adjustment wrenches away from the work
table before operation.
2. Be sure all parts are securely tightened and oil relevant parts before operation.
3. TURN DOWN the triangle belt of motor by hand to ensure the shaft of blade, gear
work well and without collision.
4. STOP the planer immediately once there is abnormal sound and do not start it
without finding out the reason.
5. SAFETY OF OPERATOR AND EQUIPMENT, keep the planer power-off when doing any
adjustments, maintenance and cleaning.
6. KEEP PLANER IN A DRY COOL WORKING ENVIRONMENT and do not operate under
direct sunlight or outside in wet rainy conditions.
7. CHANGE THE BLADE when it is worn or after using for a period of time. And make
sure to change all blades at the same time to keep the same weight for each blade,
otherwise, high speed imbalance will shorten the accuracy and planer’s operating
time.
8. KEEP CHILDREN, VISITORS and PETS AWAY. All non-operating personnel should keep
a safe distance from working equipment to avoid any accident or injury.
9. 9、KEEP WORK AREA AND PLANER CLEAN AFTER USE. Switch off the power after use
every day.
10. CHANGE OR REPAIR BROKEN PARTS. DO NOT OPERATE MACHINE WITH FAULTY
PARTS, to avoid machine malfunction and injury to user.
11. KEEP THE MAX CUTTING WORKING AREA DEPTH less than 0.2” (5 mm). 0.2” (5 mm)
for less than 8” (200mm) of lumber width, O.O78” (2 mm) for more than 16” (400
mm) of lumber width) to prevent part damage or overheating.
12. SWITCH OFF PLANER for inspection to prevent damage to the motor or relevant
parts such as the blades or bolts from over loading under the following situations:
A.The shaft of blade slows down or cannot move because of cutting over depth or
there is an obstruction on the workpiece from a nail or screw.
B. There is abnormal sound.
RESTART PLANER once problem is resolved.
