7
•Using any kind of boiler water treatment (solution) can help decrease scale build-up.
•DO NOT add detergent, wax or any cleaning additives in the water tank or steam vessel.
•DO NOT use distilled water or filtered water below 15 ppm.
•Connect to electrical power according to the product specifications. (See page 2,
“Product Specifications”)
•The electric supply connection is to be made by a qualified electrician and comply with
IEC 60364-1.
•Be cautious of the risk of electric shock in the event of connecting to electrical power.
•Ensure the ground connection of Grounding Chain and Ground Wire attached on the
machine to prevent the risk of damage from Electro Static Discharge.
•Users about to use the machine should carry out a visual check for insecure cable at
entry to a plug, evidence of poor wire connections or evidence of appliance or plug
overheating.
•Make sure that all the switches on the machine are off before plug-in power cables.
•In the event of using extension wire/extension cord, ensure that both ends of electric
wires are securely attached and properly insulated.
•Make sure to use right extension cord depending on the electrical parameters and the
length of extension cord. (Contact manufacturer or local distributors)
•Machines shall not be used by children. Children should be supervised to ensure that
they do not play with the machine.
•Children shall not play with the appliance.
•Cleaning and user maintenance shall not be made by children without supervision
•WARNING Do not use the machine within range of persons unless they wear protective
clothing.
•Noise can be reached to 95 decibel(dB) but subject to differ depending on steam
pressure.
•DO NOT use the machine within the range of persons who are not wearing any protective
gear.
•HOT SURFACE. DO NOT touch steam vessel, steam valves, steam hoses and guns in
operation.
•Replace steam hoses immediately if ruptured.
•Use manufacturer approved spare parts and accessories including steam hoses, steam
guns and power cables.
•Unplug the machine from its power source and allow it to cool before carrying out any
maintenance.
•NEVER disable sensors in order to bypass an alarm signal.
•Open the drain valve and release all remaining water from the steam vessel after users
shut down the machine completely. (See page 15, “Shutdown Operation”)
•NEVER spray steam over cleaning hazardous materials or surfaces containing hazardous
substance including asbestos.
