SIXTOL SX ONE SX1009 Manual de usuario
Car diagnostic tool OBD II / EN
Autodiagnostika OBD II / CZ
Autodiagnostika OBD II / SK
Autodiagnostik OBD II / DE
Autodiagnostyka OBD II / PL
Autódiagnosztika OBD II / HU
Diagnoză auto OBD II / RO
SX ONE SX1009
SX FIVE SX1010
Instructions for use
Návod k použití
Návod na použitie
Gebrauchsanweisung
Instruções de uso
Instrucciones de uso
Mode d'emploi
1
EN
Instructions for use
Please, read this manual carefully before first use. Familiarize
yourself with all the instructions that are necessary for the safe
handling of the tool. The device may only be used as intended
according to this manual. Use for other purposes is not
permitted. Improper handling can lead to injury or death.
2
EN
Always perform testing in a safe environment.
Wear safety glasses specified by local standard (ANSI, ČSN,
DIN…).
Keep as far away as possible from hot engine and vehicle
parts.
Work on the vehicle in a well-ventilated room. Exhaust
gases can cause irreversible liver damage.
Place barriers (front blocks) in front of the front wheels to
ensure that the vehicle does not move on its own.
Keep the gear stick in the PARK (automatic transmission) or
NEUTRAL (manual transmission) position and make sure
that the handbrake is pulled up.
Always have a fire extinguisher suitable for all types of fires
on hand.
Do not connect or disconnect any diagnostic equipment
while the ignition is on or the engine is running.
Keep the device dry, clean and as far as possible from
water, oil and vaseline. If you get the device dirty, take a
lightly dampened cloth and wipe it gently.
Safety precautions
To prevent damages both to your vehicle and this device, first
read the following instructions. Follow these instructions when
working on the vehicle.
3
EN
Powering the diagnostic tool
The device is powered by a connecting cable to the vehicle. It is
therefore not necessary to look for additional batteries. To
power the device, find an OBD2 socket in your car, which is
located at a maximum distance of 80 cm from the driver and
most often in the space under the steering wheel. Then connect
the device cable and the power will start immediately, while you
are conveniently viewing the values of the connected car. For
older vehicles, the OBD2 connector is also located in the center
panel area and is usually covered with a plastic cover.
Connecting the diagnostic tool
1. Turn off car ingition
2. Find 16 pin socket
3. Plug the device’s cable into the socket
4. Turn on car ingnition. The engine can be off or running, it
depends on the user.
5. The diagnostic device will turn on automatically.
4
EN
Manufactured since 2001 – European vehicles (gasoline
engine)
Manufactured since 2004 – European vehicles (diesel
engine)
Manufactured since 2000 – Asian vehicles
Manufactured since 1996 – American vehicle
Manufactured since 1996 – Light trucks (vans)
ISO 15765-4 (CAN protocol)
ISO 14230-4 (Keyword Protocol 2000)
ISO 9141-2 (Vehicles from Asia and Europe and Chrysler
vehicles)
J1850 VPW (GM vehicles)
J1850 PWM (Ford vehicles)
Working with the diagnostic tool
Diagnostics working with the OBDII standard are intended
primarily for reading and deleting faults from the engine
control unit. Furthermore, it is possible to monitor current data
from vehicle operation, view information about emission values
or read basic information about the vehicle with the device. All
these functions depend on the vehicle model and what the
control unit allows the user to check.
Supported vehicles:
Supported diagnostic protocols:
5
EN
Screen dimensions: 50 x 27 mm / 2.24“ (128 x 64 px)
Backlit display
Working temperature: 0 - 60 °C
Power supply: 8 - 18 V
Languages: Czech, Slovak, English, German, Spanish, French,
Italian, Portuguese
Cabel length: 82 cm
Device dimensions: 125 x 76 x 24 mm
Weight: 200 g
Screen dimensions: 50 x 37 mm / 2.4" (240 x 320 px)
TFT color display
Working temperature: 0 - 60 °C
Power supply: 8 - 18 V
Languages: Czech, Slovak, English, German, Spanish, French,
Hungarian, Italian, Portuguese, Swedish
Cabel length: 90 cm
Device dimensions: 125 x 80 x 24 mm
Weight: 350 g
Technical parameters (SX ONE SX1009):
Technical parameters (SX FIVE SX1010):
6
EN
The symbol on the product means that used
electrical and electronic products should not
be disposed of with your other household
waste. Dispose of the product properly at
designated collection points, where they will
be accepted free of charge.
By ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences to the environment
and human health, which could otherwise be
caused by inappropriate waste handling of
this product. For further details contact your
local authority or the nearest collection point.
Improper disposal of this type of waste may
result in penalties in accordance with
national regulations.
Information for users on the disposal of electrical and
electronic equipment
7
EN
EU Declaration of Conformity
Subject of declaration, model, product identification:
SX1009 Car diagnostic tool SX ONE
SX1010 Car diagnostic tool SX FIVE
Manufacturer:
TorriaCars s.r.o., Nádražní 12, 471 07 Žandov,
ID: 28723163, VAT ID: CZ28723163
sixtol.cz|sixtol.com,
Declares that the subject matter of the declaration described above
complies with the relevant EC Directives:
- RoHS - Restriction on the use of certain hazardous substances in
electrical and electronic equipment-2015/863/EU
- CE mark - 93/68/EHS
This declaration is issued under the sole responsibility of the
manufacturer.
Harmonized standards (including their amending annexes, if any) which
have been used for conformity assessment and on the basis of which
conformity is declared:
EN 61000- 6-3:2007+A1:2011, EN 61000-6-1:2017
Place and date of issue of the EU declaration of conformity: Liberec 9th
September 2019.
In name of company TorriaCars s.r.o.:
Adam Jágr
Managing Director
Před prvním použitím si pečlivě přečtěte tento manuál.
Seznamte se se všemi instrukcemi, které jsou nezbytné pro
bezpečnou manipulaci s nářadím. S přístrojem se smí zacházet
pouze tak, na co je určen. Použití k jiným účelům není
dovoleno. Neodborná manipulace může vést ke zranění nebo
smrti.
Návod k použití
8
CZ
9
CZ
Testování vždy provádějte v bezpečném prostředí.
Noste bezpečnostní brýle stanovené normou ČSN.
Držte se co možná nejdále od horkých částí motoru a
vozidla.
Na vozidle pracujte v dobře odvětrávané místnosti.
Výfukové plyny mohou způsobit nenávratné poškození
jater.
Položte si zábrany (špalky) před přední kola, abyste měli
vždy jistotu, že se vozidlo samo nerozjede.
Řadící páku mějte v poloze PARK (automatická převodovka)
nebo NEUTRÁL (manuální převodovka) a ujistěte
Mějte po ruce vždy hasící přístroj vhodný pro všechny druhy
požárů.
Nepřipojujte nebo neodpojujte jakékoliv diagnostické
zařízení v případě, že je zapnuté zapalování nebo běží
Přístroj udržujte v suchu, čistotě a co možná nejdále od
vody, oleje a vazelíny. V případě, že jste přístroj zašpinily,
Poučení o bezpečnosti
Pro preventivní ochranu jak svého vozu, tak tohoto přístroje si
nejprve pročtěte následující pokyny. Těmito pokyny se řiďte
alespoň tehdy, pracujete-li na vozidle.
se, že je ruční brzda zabrzděna.
motor.
vezměte lehce namočený hadřík a opatrně jej přetřete.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Idiomas:
Otros manuales de Equipo de diagnóstico de SIXTOL
