SiTime Time Machine II Manual de usuario

Chipsmall Limited consists of a professional team with an average of over 10 year of expertise in the distribution

of electronic components. Based in Hongkong, we have already established firm and mutual-benefit business

relationships with customers from,Europe,America and south Asia,supplying obsolete and hard-to-find components

to meet their specific needs.

With the principle of “Quality Parts,Customers Priority,Honest Operation,and Considerate Service”,our business

mainly focus on the distribution of electronic components. Line cards we deal with include

Microchip,ALPS,ROHM,Xilinx,Pulse,ON,Everlight and Freescale. Main products comprise

IC,Modules,Potentiometer,IC Socket,Relay,Connector.Our parts cover such applications as commercial,industrial,

and automotives areas.

We are looking forward to setting up business relationship with you and hope to provide you with the best service

and solution. Let us make a better world for our industry!

Tel: +86-755-8981 8866 Fax: +86-755-8427 6832

Email & Skype: [email protected]om Web: www.chipsmall.com

Address: A1208, Overseas Decoration Building, #122 Zhenhua RD., Futian, Shenzhen, China

  

Revision 2.11 11/06/2015

Time Machine II User’s Manual

Time Machine II

User’s Manual

2 | P a g e

Time Machine User’s Manual

Table of Contents

Introduction ............................................................................................................................................ 3

Important Notes ...................................................................................................................................... 3

Package Contents .................................................................................................................................... 3

So tware Installation ............................................................................................................................... 5

So tware Installation rom File ................................................................................................................. 6

Hardware Connection .............................................................................................................................. 6

Driver Installation .................................................................................................................................... 7

Working With the Time MachineSo tware ............................................................................................... 8

User Inter ace eatures .................................................................................................................... 8

Entering Part Number .................................................................................................................... 10

Part Number Generator ................................................................................................................. 11

Part Programming .......................................................................................................................... 12

Tracking ID ..................................................................................................................................... 12

Auto Detect Mode ......................................................................................................................... 12

Viewing Operation Logs ................................................................................................................. 13

Data LogMode ............................................................................................................................... 14

Viewing DataLogs .......................................................................................................................... 15

So tware Updates .................................................................................................................................. 17

Troubleshooting .................................................................................................................................... 18

The Time Machine ails to start ...................................................................................................... 18

Programming generates a FAIL message ........................................................................................ 18

Reporting a bug ..................................................................................................................................... 18

Disclaimer ............................................................................................................................................. 19

3 | P a g e

Time Machine User’s Manual

Introduction

This User’s Manual describes the so tware and hardware eatures o the Time Machine II

(TMII),a portable kit designed or programming SiTime ield programmable (FP) oscillators. The

Time Machine supports many SiTime oscillator parts, with special socket cards that can

accommodate di erent package sizes.

Important Notes

•Re er to disclaimer section or terms and conditions governing the use TMII and devices

programmed on TMII.

•A ter programming, place samples into an antistatic bag clearly marked "Engineering

Samples."

•Samples can only be programmed using speci ic ield programmable (FP) parts or a

given oscillator amily. Re er to http://www.sitime.com/ p-devices or more in ormation

on how to select and order FP parts.

•Please contact your SiTime sales representative or large volume production orders.

•The Time Machine II has not been tested or EMC compliance, EMI radiation

susceptibility, or any temperature and humidity cycling. The recommended temperature

range is 20°C to35°C.

Package Contents

Your Time Machine II package consists o the ollowing items:

1. SiTime Programmer (1 pcs)

2. Socket cards:

Time Machine II comes with three di erent socket cards. Each adapter board includes

two or more sockets or connecting devices in di erent packages to the main unit or

programming. It is possible to remove and insert devices in the socket while the board is

connected to the SiTime Programmer

3. USB Cable (1 pcs)

4. Quick Start Guide (can also be ound here - http://www.sitime.com/tm-um)

5. Samples kit with several devices (enclosed device types may vary;please contact sales or

additional units)

6. Tweezers or handling small devices manually

P a g e 4 |

Time Machine User’s Manual

Figure 1: Time Machine II base unit

Figure 2: Time Machine socket card SiT6160DK. Supports 5.0mm x 3.2mm (6-pin) and 7.0mm x 5.0mm (6-pin)

Figure 3: Time Machine socket card SiT6161DK. Supports 2.0mm x 1.6mm (4-pin) and 2.5mm x 2.0mm (4-pin) packages

Figure 4: Time Machine socket card SiT6162DK. Supports G package (2.7mm x 2.4mm 4-pin) and 3.2mm x 2.5mm (4-

pin) packages

Figure 5: Time Machine socket card SiT6163DK. Supports G package (2.7mm x 2.4mm 4 pin) and 3.2mm x 2.5mm (6 pin)

packages

Pin1 location

art outline

Arrow indicates Pin1

P a g e 5 |

Time Machine User’s Manual

Figure 6: Time Machine socket card SiT6165DK. Supports S package (SOT23-5) and 3.2mm x 2.5mm (6 pin) packages

Software Installation

Go to web page (http://www.sitime.com/tm-sw) and download SiTime installer. Run

downloaded installer and you will be brought to screen below.

Press Install button right a ter Time Machine Software.

Note:

The Time Machine requires .NET Frameworkinstalled on your computer. Install .NET

Framework be ore installing Time Machine Software. Green checkmark will appear i .NET

Framework will be present on target PC or a ter installation completed.

P a g e 6 |

Time Machine User’s Manual

Once installation is completed Time Machine Software version will be displayed.

Software Installation from File

I you do not have the installation USB Flash drive, you may download Time Machine

so tware rom the TMII product page on SiTime website. In this case, you should install it by

double-clicking the setup ile and ollowing the on-screen installation instructions.

Hardware Connection

Connect the SiTime Programmer to your PC using the USB cable. The power light will be

illuminated.

The irst time the SiTime Programmer is connected, the Windows Found New Hardware

noti ication will appear. Please wait until driver installation is completed.

P a g e 7 |

Time Machine User’s Manual

Driver Installation

The irst time the so tware is started the driver installation will be required. Time Machine

so tware will install all required drivers automatically.

The Windows Security noti ication window will appear. Please check Always trust software

from “sitime cor ” and press the Install button.

P a g e 8 |

Time Machine User’s Manual

Working With the Time Machine Software

Starting the so tware launches the main user inter ace (UI) as shown in below.

User Interface features

The ollowing eatures are available in the main UI:

•TimeMachine> View Logs – launches the log viewer

•TimeMachine>Auto Detect – enables/disables parts auto detection mode

•TimeMachine> Settings – launches available part amilies con iguration

•TimeMachine>Exit – quits the so tware

•Help>View Manual – opens this User's Manual

•Help>Supported devises – shows the list o devices supported by Time Machine

Additional options

Device status

Operation indicator

General software help

Tracking ID field

Part Number Generator button

Datasheet button

Program button

Part Number field

Message window

Channel 1

Channel 2

P a g e 9 |

Time Machine User’s Manual

•Help > Register– links to registration on SiTime Corp. website (www.sitime.com/time-

machine-registration)

•Help > FP Device Re ill – links to Field Programmable Oscillators page

(www.sitime.com/fp-devices)

•Help>Get Support – opens your email client with a dra t o support request e-mail

•Help > Check or Updates – checks or so tware updates (requires internet

connection)

•Help > About - SW/FW versions , only SW version is shown i the SiTime Programmer

is not connected

•Device status – shows status o the SiTime Programmer (Connected/Disconnected)

•Operation indicator – indicates operation status and results (READY/BUSY/PASS/FAIL)

•Message Window – re lects operation result and part detection result.

The main UI can run with or without the SiTime Programmer connected to the host computer.

This allows you to view the programming log history and get so tware updates without

connecting the base unit.

Otros manuales para Time Machine II

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de SiTime

SiTime

SiTime SiT6712EB Manual de usuario

SiTime

SiTime SiT6731EB Manual de usuario

SiTime

SiTime Time Machine II Manual de usuario

SiTime

SiTime SiT6098EBB Manual de usuario

SiTime

SiTime SiT6722EB Manual de usuario

SiTime

SiTime SiT92216 Manual de usuario

SiTime

SiTime SiT6731EB Manual de usuario

SiTime

SiTime SiT6503EB Manual de usuario

SiTime

SiTime SiT6098EBB Manual de usuario

SiTime

SiTime SiT6760EB Manual de usuario

SiTime

SiTime SiT92113 Manual de usuario

SiTime

SiTime SiT95314 Manual de usuario

SiTime

SiTime SiT6502EB Manual de usuario

SiTime

SiTime SiT6722EB Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario