Sirkom SRK-1080P-C Manual de usuario

SIRKOM SRK-1080P-C Player

User Manual

Feb 10, 09

FCC Notices

It’s herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject

to the following two conditions:

zThis device may not cause harmful interference.

zThis device must accept any interference received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a residential installation.

This equipment generated uses and can radiate radio frequency energy and if not installed and used

in accordance with the instruction manual may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio of television reception, which can be determined

by turning the equipment off or on, the user is encouraged to try to correct the interference by one or

more of the following measures:

zReorient or relocate the receiving antenna.

zIncrease the separation between the equipment and receiver.

zConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

zConsult the dealer or an experienced radio TV technician for help.

CE Declaration

This device complies with CE class B.

EN55022 IEC 61000-4-4

EN61000-3-2 IEC 61000-4-5

EN61000-3-3 IEC 61000-4-6

EN55024 IEC 61000-4-8

IEC 61000-4-2 IEC 61000-4-11

IEC 61000-4-3

Printed in Spain

All contents are subject to change without notice.

All trademarks are the property of their respective owner.

CONTENTS

1. Package Contents………………………………………….. 4

2. Introduction………………………………………………... 4

3. Features…………………………………………………… 4

4. Hardware Overview………………………………………... 6

5. Remote Control…………………………………………….. 7

5.1 Entering Text or IP Address………..…………………… 7

6. Start the SRK-1080P-C Player…………………………. 8

7. Setting Up………………………………………………….. 9

7.1 Network Setup…………………………………………. 9

7.2 FTP Setup……………………………………………… 11

7.3 Video Setup…………………………………………….. 13

7.4 Other Setup…………………………………………….. 14

8. Using the SRK-1080P-C Player…………………..……... 16

8.1 Play Media Files on the CF Card………………………. 16

8.2 Multiple Display Zones…………..……………………. 19

8.3 Download Function……………………………………. 20

8.4 Play the Media Files on the PC………………………… 23

8.5 Download/ Upload Media Files………………………… 26

8.6 RS-232 Function……………………………………….. 29

9. Http Command Function………….……………………….. 30

9.1 Player Control………………….……………………….. 31

9.2 Network Setup………………………………………….. 33

9.3 Timer Setup…………………………………………….. 34

10. Schedule Function……………....…..……..……………….. 35

10.1 Install the Schedule Software…….……..…………….. 35

10.2 Set Up the Schedule Software…..………..………….. 35

10.3 Apply the Schedule on the SRK-1080P-C Player….. 40

11. Optional Auxiliary Equipment……..……..……………….. 41

11.1 Play-Button Box (SIRKOM BB)………..…………….. 41

11.2 IR Cable……………………………..…..…………….. 41

11.3 PIR Sensor………………………..……..…………….. 42

11.4 Touch-Sensor Buttons…..………………….………….. 42

12. Troubleshooting……………………………………………. 44

1. PACKAGE CONTENTS

1. SRK-1080P-C Player

2. Remote Control

3. Audio Cable

4. Y. P b . P r C a b l e

5. S-Video Cable

6. Power Adapter

7. User Manual

8. Schedule Software

2.INTRODUCTION

The SRK-1080P-C Player is a digital media player that plays HD WMV9 and WMA from CF

memory card without a computer. The SRK-1080P-C Player supports High Definition movie

hardware decode acceleration, presents for you the smoother and clearer picture, it supports

high resolution video output such as 1080P / 1080i / 720P for movie theater quality video on a

big screen. By connecting to Video, S-Video, Y.Pb.Pr, VGA (resolution up to 1360 x 768),

HDMI (1920 x 1080P) and Audio, you can play media files on any display device.

What’s more, the SRK-1080P-C Player supports multiple display zones, you can play movie,

picture and scrolling text on the screen simultaneously. The scrolling text displays an animated

text message on a bar on bottom of your screen, the information of your product can catch the

customer’s eyes easily.

The SRK-1080P-C Player can connect to a wired network at speed up to 100Mbps. This

function provides you with maximum throughput for sharing and transferring digital media.

3.FEATURES

Supports multiple file formats: HD WMV9 and WMA.

Supports Video, S-Video, Y.Pb.Pr, HDMI, VGA and Audio output.

HD Y.Pb.Pr output supports resolution: NTSC Mode(60Hz): 480P/ 720P/ 1080i.

PAL Mode(50Hz): 576P/ 720P/ 1080i.

HDMI Output: 480P/ 720P/ 1080i/ 1080P.

VGA output supports resolution: 640x480/ 800x600/ 1024x768/ 1280x1024/ 1360x768.

3. FEATURES (continued)

Supports RS-232 port for computer control with ASCII command (play, stop, pause…etc).

Supports Multiple Display Zones: Displays the movie, picture (supports png format/

size: 150x400/ 96DPI) and scrolling text on the screen simultaneously.

-Supports two display modes:

Mode 1: Display demo files with scrolling text.

Mode 2: Display demo files (in main screen), pictures (in second screen) and scrolling

text simultaneously.

-The second screen (display picture files) can be repositioned to left or right of the

main screen.

-The display speed of scrolling text can be adjusted, and scrolling text supports

multi language (English/ Latin/ Japanese).

Touch-Sensor Buttons Function (optional)

-Press one of the touch-sensor buttons, the SRK-1080P-C Player will play the

corresponding file automatically.

-Used with various operating environment (glass, plastics and acrylic material, except

metal material), the thickness supports 3mm -5mm, and it can be customized to 5cm

for OEM project.

PIR Sensor Function (optional)

-After sensing approaching subjects, the SRK-1080P-C Player will play the files

automatically.

-Sensing distance is up to 3 meters with an angle of 45.

Schedule Function: The SRK-1080P-C Player will auto play the designated file (only

supports video files) at the designated date.

Connect using an Ethernet network cable at up to 100Mbps.

Supports CF memory cards. (Suggest using the high speed (150X) CF card)

Supports HTTP command function.

Exports the Configuration Value: You can export the configuration value to the CF card.

The configuration can be modified on your PC, and can be applied to the SRK-1080P-C

Player or others.

Compatible with Windows Media Player 11: Play media files stored in a network

computer.

Supports FTPAuto Download Function: Connect to Remote FTP server and download

data to the CF card automatically.

Supports Download Pause / Resume Function: Continue unfinished downloads upon

next session.

Embedded FTP Server.

Supports NTP Network (G..M.T) Timer.

Supports Universal Plug and Play (UPnP) and DHCP.

Supports SLIDE SHOW Function (interval time with 10/ 15/ 30/ 60 seconds).

4.HARDWAREOVERVIEW

Power Switch: Toggle between main power on & off.

DC Input: For the power adapter. (DC 12V / 1.5A)

VGA Connector: Connects to devices that support VGA input. (LCD、projector)

Y.Pb.Pr Connector: Connects to devices that support Y.Pb.Pr input. (HDTV、projector)

HDMI Connector: Connects to devices that support HDMI input.

RS-232 Connector: Used for computer control with ASCII command.

RJ-45 Ethernet Connector: Connects to router or PC by RJ-45 Cable.

Audio Connector: Connects to sound input. (HDTV with amplified speaker)

S-Video Connector: Connects to devices that support S-Video input. (HDTV、projector)

IR IN: Connects to PIR Sensor (optional) or IR Cable (optional).

Video Connector: Connects to device that support Video input. (HDTV、projector)

“CF READY” LED: Steady green confirms that the CF card is inserted correctly.

CF Card Socket: For CF memory card.

“RESET” Button: To restart the SRK-1080P-C Player.

5. REMOTE CONTROL

Power on/ off

Select the output mode

Numeric Key

Delete last entry

Select a function or to play the selected file

Open the setup menu Mute sound

OSD display function on/ off

Auto-play function on/ off

Mute sound

Volume up/ down

Move the cursor

Confirm the selection/ entry

Go back one layer

Select the TV type (NTSC/ PAL)

Shuffle on & off

Play the file selected

View the previous/ next file

Play the previous/ next file if in playback

Select the repeat mode

Rewind/ forward movie or music files

Stop playback

Show the information of the file selected

Search video (movie) timeframe

Zoom in/ out on the movie or picture

Pause the playback or play frame by frame

5.1 ENTERING TEXT OR IP ADDRESS

Keys need to be pressed multiple times to enter the letter corresponding to that key.

For Example: To enter the letter “a”. you would press the “2” button twice.

Enter The IPAddress

For Example: To enter the IP address”192.168.100.100”,.

Step 1: Press “1” once, then “1” is displayed, and the color of “1” is orange.

Step 2: When the color of “1”turns white, press “9” once, then “9” is displayed.

Step 3: Repeat steps 1 and 2 to enter and complete the IP address.

6. START THE SRK-1080P-C Player

Power On

zInsert the CF memory card that has WMV9 or WMA files.

zPress the “POWER” button to power on the SRK-1080P-C Player, then press the “TV

MODE” button to select the output mode.

Status After Power On

zStatus 1: If the “AUTOPLAY (Movie, Picture or MultiLayer)” function is enabled and

there are movie or picture files in the CF card, the SRK-1080P-C Player will auto play

movie or picture files on the CF card after power on.

zStatus 2: If the “AUTOPLAY” function is disabled, after power on the main menu will

appear as shown in the following figure. There are two groups in the main menu

(“/mnt/CF” and “SETUP”).

NOTE: The pop-up window that shows the IP address will appear later, if DHCP mode is selected

when the SRK-1080P-C Player is turned on.

Power Off: Press the “POWER” button again to power off.

7.SETTINGUP

In the main menu, using the “▼” button on remote control to select the “SETUP” item, then

press the “ENTER” button. You will be presented with the SRK-1080P-C Player settings

screen.

You can also press the “SETUP” button on remote control to directly open the settings

screen. (If there is file that is being play, please stop first.)

There are four groups of sub-menu in the main menu (“Network Setup”, “FTP Setup”,

“Video Setup” and “Other Setup”).

In the settings screen, you can use the “▲、▼、

▲

、

▼

” buttons to select an item, and press

the “ENTER” button to confirm the selection.

Press the “SETUP” button on remote control to save and quit the settings screen.

7.1 NETWORK SETUP

Network with: Select your network connection Disable/ RJ45.

IPAssigned by DHCP: If you have a DHCP-enabled router, please select “On”, then the

router will automatically assigns an IP address to the SRK-1080P-C Player. If you don’t have

a DHCP –enabled router, select “Off” and type the network information in “Assign IP

Address”.

7.1 NETWORK SETUP (continued)

Assign IPAddress: If the SRK-1080P-C Player is connected to a network without a DHCP

server or you want to use Local FTP Server function, enter the fixed IP address, Mask,

Gateway and DNS for the SRK-1080P-C Player.

PS. Refer to 5.1 for how to enter IP address by remote control.

NOTE: Before setting the IP address, Mask, Gateway and DNS, check the network information

of your PC. Please follow the steps below to get the network information of your PC.

Step 1: Click on “Start” →“Run” and type in “command”, then press “ENTER”.

The MS-DOS window will appear, type in “ipconfig” and then press “ENTER”

to get the network information.

Step 2: Assign IP Address, Mask (Subnet Mask) and Gateway (Default Gateway)

for the SRK-1080P-C Player.

Enter the same values of the Subnet Mask and Gateway, and be careful not to enter

the values of IP address that are already used by other devices on the network.

Media Player 11 Server: Enable/ disable the Media Player 11 server.

7.2 FTP SETUP

Local FTP Server: Turn on/ off the SRK-1080P-C Player server.

(If you use the SRK-1080P-C Player server, please disable the DHCP function and input a

fixed IP address, Mask, Gateway and DNS of the SRK-1080P-C Player)

Local FTP Server Setup: Set the “Port”, “User ID” and “Password” of the SRK-1080P-C

Player. (The Default Port: 21, User ID: root, Password: admin)

FTPAuto Download: Enable/ Disable the FTP auto download function.

Remote FTPDownload Setup

- Server IP: Enter the domain name or IP address of the FTP as was given to you by

your Web hosting provider.

- Port: The default port for FTP is 21. In most cases you should not change this number.

If the FTP site uses a port other than 21, you should enter the correct port.

- User ID: Enter the user name of the Remote FTP server.

- Password: Enter the Password of the Remote FTP server.

- FTP Path: Enter the folder path that you want to share.

NTP Server: Enable/ Disable the NTP server function. (if the SRK-1080P-C Player isn’t

connect to internet, please disable the NTP Server function)

Time Setup: Set the NTP Server, Local Time and Auto Download Time here.

① NTP Server (the SRK-1080P-C Player must be already connected to the network)

-NTP Server: Enter the NTP server IP address like: 204.152.184.72.

-G.M.T: After the unit get the time from NTP server, it will update the G.M.T field.

-Time Zone: Use the Volume +, -and Numeric Key to set the time zone of your

location. (time zone must be set properly for the Auto-Download and

Schedule functions)

NOTE: GMT and applied regions

Time Zone Region Time Zone Region

(GMT-12:00) Eniwetok, Quazalen (GMT+02:00) Helsinki, Riga, Tallinn

(GMT-11:00) Midway, Ireland, Samoa (GMT+03:00) Nairobi

(GMT-10:00) Hawaii (GMT+03:00) Moscow, Saint Petersburg,

Volgograd

(GMT-09:00) Alaska (GMT+03:00) Baghdad

(GMT-08:00) Pacific GMT (U.S. & Canada);

Tijuana

(GMT+03:00) Kuwait, Raid

(GMT-07:00) Continental GMT (U.S. &

Canada)

(GMT+03:30) Tehran

(GMT-07:00) Arizona (GMT+04:00) Baku, Tbilisi, Ere van

(GMT-06:00) Mexico city (GMT+04:00) Abu Dhabi, Muscat

(GMT-06:00) Saskatchewan (GMT+04:30) Kabul

(GMT-06:00) Eastern Coast GMT (U.S. &

Canada)

(GMT+05:00) Yekaterinburg

(GMT-06:00) Indiana (Eastern Coast) (GMT+05:00) Islamabad, Karachi, Tashkent

(GMT-04:00) Atlantic GMT (Canada)

(GMT+05:30)

Calcutta, Chennai, Mumbai,

New

Delhi

(GMT-04:00) Santiago (GMT+05:45) Katmandu

(GMT-04:00) Caracas, La Paz (GMT+06:00) Sri Jayewardenepura Kotte

(GMT-04:00) Newfoundland (GMT+06:00) Astana, Dakar

(GMT-03:00) Greenland (GMT+08:00) Irkutsk, Ulan Bator

(GMT-03:00) Buenos Aires, Georgetown (GMT+08:00) Kuala Lumpur, Singapore

(GMT-03:00) Brasilia (GMT+08:00) Taipei

(GMT-02:00) Mid-Atlantic (GMT+08:00) Perth

(GMT-01:00) Capo Verde Is. (GMT+09:00) Seoul

(GMT-01:00) Azores (GMT+09:00) Yakutsk

(GMT-00:00) Greenwich GMT; Dublin,

Edinburgh, Lisbon, London

(GMT+09:00) Osaka, Sapporo, Tokyo

(GMT-00:00) Casablanca, Monrovia (GMT+09:30) Darwin

(GMT+01:00) Beograd, Bratislava, Budapest,

Ljubljana, Prague

(GMT+09:30) Adelaide

(GMT+01:00) Brussels, Copenhagen,

Madrid, Paris

(GMT+10:00) Guam, Port Moresby

(GMT+01:00)

Sarajevo, Skopje, Sofia,

Vilnius,

Warsaw, Zagreb

(GMT+10:00) Brisbane

(GMT+01:00) Midwest Africa (GMT+10:00) Vladivostok

(GMT+01:00)

Amsterdam, Berlin, Bern,

Rome,

Stockholm, Vienna

(GMT+10:00) Canberra, Melbourne, Sydney

(GMT+02:00) Bucharest (GMT+10:00) Hobart

(GMT+02:00) Athens, Istanbul, Minsk (GMT+11:00) Magadan, Solomon Is., New

Caledonia

(GMT+02:00) Jerusalem (GMT+12:00) Auckland, Wellington

(GMT+02:00) Cairo (GMT+12:00) Fiji, Kamchatka Pen.,

Marshall Is.

(GMT+02:00) Harare, Pretoria (GMT+13:00) Nuku'alofa

② Local Time: Set the system time manually.

NOTE: If the NTP Server and Local Time have been set, the NTP Server will be the first

priority (the SRK-1080P-C Player is already connected to the network).

③ Download Time: Set the FTP auto-download time.

Local HTTP Server: Enable/ Disable the HTTP command function.

Local HTTP Server Setup: To set the “Port”, “User ID” and “Password” of the

SRK-1080P-C Player. (The Default Port: 80, User ID: root, Password: admin)

NOTE: Press the “SETUP” button on the remote control to save the settings, and it

will auto exit the settings screen, then restart the SRK-1080P-C Player.

7.3 VIDEO SETUP

TV Standard: Select the output TV video format (NTSC / PAL).

NTSC Active Output: Select the output mode. (HDMI/ SD Video/ VGA/ HD Y.Pb.Pr)

You can also press directly the “TV MODE” button on the remote

control to select output mode.

Aspecl-ratio: Select TV mode 4:3 or 16:9.

HDMI: Select the HDMI output resolution among 480i / 480p/ 720p / 1080i/ 1080p.

Select the “Auto EDID”, the SRK-1080P-C Player will scan the display device

connected and set the correct resolution automatically.

SD Video: Select the SD output mode. (“Video/ S-Video” or “Y.Cb.Cr”)

VGA 60Hz: Select the VGA output resolution.

(640*480 / 800*600/ 1024*768/ 1280*1024/ 1360*768)

HD Y.Pb.Pr 60Hz: Select the Y.Pb.Pr output resolution among 480p / 720p / 1080i.

Scrolling text color: Select the text color (white/ yellow/ green/ rotation)

Scrolling text background: Turn on/ off the text background.

Scrolling text: Select the language of scrolling text: Latin (English)/ Japanese.

7.4 OTHER SETUP

Play OSD Display: Enable or disable the OSD display.

Auto Play

-Movies: Auto play movie files on the CF card after power on.

- Pictures: Auto play picture files on the CF card after power on (slideshow function).

- MultiLayer: Directly execute Multiple Display function after power on.

- Off: Turn off the Auto Play function.

SlideShow Interval: Set the time each photo is shown to 10, 15, 30 or 60 seconds.

Lock Remote Controller: Enable/ disable the auto key lock function. (The SRK-1080P-C

Player will auto lock when there is no further input for 1 minute.)

Lock Password Setup: Press the “Enter” button to open the “Set Password” window. Enter

the password with numeric buttons and press the “Enter” button to save the new password

(The default password: 123).

7.4 OTHER SETUP (continued)

Export Setting File: Press the “Enter” button to export the configuration value to the CF

card.

zCopy the file “HDPlayerSetting.txt” on CF card to your PC. Use the “Wordpad” to open

the file, and you can see all the configuration value of SRK-1080P-C Player.

zYou can modify directly the configuration value on your PC.

Example.

[AutoPlay] Off Options: Movies, Pictures, Off

The “Auto Play” function is turned off, you can change directly the mode to Movies or

Pictures.

zCopy the completed file “HDPlayerSetting.txt” from PC to CF card. Insert the CF card to

the SRK-1080P-C Player, the SRK-1080P-C Player will apply the new settings

automatically.

Play Button: Only for used with play buttons. The SRK-1080P-C Player supports two

options (Repeat Default / Repeat All) when the demo file finishes playing.

Multiple Display:

-Movie: Display movies with scrolling text.

- Movie + PIC (L): Display movies and pictures with scrolling text, and the pictures are on

the left.

- Movie + PIC (R): Display movies and pictures with scrolling text, and the pictures are on

the right.

Scrolling Text Speed: Select the display speed of the scrolling text.

Picture Slide: Set the mode of picture slideshow (By Slide Time/ Match Video).

8. USING THE SRK-1080P-C Player

8.1 PLAY MEDIA FILES ON THE CF CARD

Step 1: Insert the CF card with media files, then turn on the SRK-1080P-C Player and

press the “ENTER” button on the remote control when “’mnt/CF” is highlighted to

take you into the CF card.

Step 2: Select the type of data (VIDEO/ AUDIO/ PICTURES) you want to play, and then press

the “ENTER” button on remote control to take you into the “VIDEO LIBRARY”,

“AUDIO LIBRARY” or “PICTURE LIBRARY”.

PS. If the symbol (return) appears on the screen, you can use “RETURN” button of

the remote control to go back one layer.

Step 3: Select the file you want to play, and press “ENTER” or “PLAY” button on the remote

control to play the file.

VIDEO LIBRARY AUDIO LIBRARY PICTURE LIBRARY

RETURN

8.1.1 Using the Remote Control When Media File Is Playing

SETUP: Press the button to adjust the brightness, contrast or saturation while the movie or

picture is playing. With the “+ VOLUME –” button.

- First Press: Adjust the brightness.

- Second Press: Adjust the contrast.

- Third Press: Adjust the saturation.

Brightness Contrast Saturation

MUTE: Mute the sound while the movie or music is playing.

+ VOLUME -: Increase/ decrease the volume while the movie or music is playing.

SHUFFLE: Turn on/ off the shuffle function.

PREV / NEXT: Play the previous/ next file.

REPEAT: Select the repeat mode.

REV / FWD: Rewind/ forward movie or music file.

STOP: Stop playing, and go back one layer.

INFO: Display the file information.

File Information

SEARCH: Search video (movie) timeframe

Press the “SEARCH” button, and enter the initial time that you want to start at, then press the

“ENTER” button to play.

PAUSE/STEP: Pause the playback or play frame by frame.

ZOOM: Zoom in/ out on the movie or picture.

OriginalSize FirstPress：ZOOM 01

Second Press：ZOOM02 ThirdPress：ZOOM 03

8.2 MULTIPLE DISPLAY ZONES

Step 1: Put movies, pictures (only supports PNG format/ size: 150x400/ 96DPI) and text file on CF

card.

Picture Files

If you select the “By Slide Time” item of the picture slide mode; please name the picture files 0.png

~ 9.png.

If you select the “Match Video” item of the picture slide mode, the file name of the picture must be

the same of the corresponding movie file.

Text File

Use the “Notepad” to create a text file on your PC. Enter the message that you want to display and

named the file “message.txt”.

Step 2: Select the Multiple Display Zones item to display the movies and pictures with scrolling

text immediately.

8.3 DOWNLOAD FUNCTION

Before it downloading files from the FTP server, the SRK-1080P-C Player will delete all contents on

CF card except the file on the CF card and the FTP server are the same.

8.3.1 Manual Download Function

Please confirm that the SRK-1080P-C Player is already connected to the network. (Refer to 7.1

Network Setup)

Please use the“▼”button to select the “DOWNLOAD” item, and press “ENTER” button. The

SRK-1080P-C Player will connect to the FTP server and download files automatically.

Before download files, the SRK-1080P-C Player will delete all contents on CF card first.

The pop-up window that shows the status of download and the screen saver will appear while

the SRK-1080P-C Player is downloading files. After finishing downloading files, the

SRK-1080P-C Player will display the files automatically.

ScreenSaver

8.3.2 Auto Download Function

If there are more than one SRK-1080P-C Player is, you can use ftp tools to divide them into

different regional group.

Tabla de contenidos

Manuales populares de Reproductor de medios digitales de otras marcas

MP-Man

MP-Man BTC245 Manual de usuario

Clarion

Clarion CZ105BT Manual de usuario