Sintrones VBOX-3000 Manual de usuario
VBOX-3000
In-Vehicle Computing
User's Manual
Version 1.1
SINTRONES® Technology Corp.
User Manual
Copyright
©2009 by SINTRONES® Technology Corp. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval sys-
tem, translated into any language, or transmitted in any form or by any means such as
electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise,
without prior written permission from SINTRONES® Technology Corp.
Other brands and product names used herein are for identication purposes only and
may be trademarks of their respective owners.
Disclaimer
SINTRONES® Technology Corp. shall not be liable for any incidental or consequential
damages resulting from the performance or use of this product.
SINTRONES® Technology Corp. makes no representation or warranty regarding the
content of this manual. Information in this manual had been carefully checked for
accuracy;however, no guarantee is given as to the correctness of the contents. For
continuing product improvement, SINTRONES® Technology Corp. reserves the right
to revise the manual or make changes to the specications of this product at any time
without notice and obligation to any person or entity regarding such change. The infor-
mation contained in this manual is provided for general use by customers.
This device complies to Part 15 of the FCC Rules. Operation is subject to the follow-
ing two conditions:
1. This device may not cause harmful interference.
2. This device must withstand any background interference including those that may
cause undesired operation.
CAUTION
Incorrectly replacing the battery may damage this computer. Replace only with
the same or its equivalent as recommended by SINTRONES® Technology
Corp. Dispose used battery according to the manufacturer's instructions.
Safety Information
Read the following precautions before setting up a SINTRONES Product.
Electrical safety
•
To prevent electrical shock hazard, disconnect the power cable from the electrical
outlet before relocating the system.
•
When adding or removing devices to or from the system, ensure that the power
cables for the devices are unplugged before the signal cables are connected.
If possible, disconnect all power cables from the existing system before you add a
device.
•
Before connecting or removing signal cables from the motherboard, ensure that all
power cables are unplugged.
•
Seek professional assistance before using an adapter or extension cord.
These devices could interrupt the grounding circuit.
•
Make sure that your power supply is set to the correct voltage in your area.
If you are not sure about the voltage of the electrical outlet you are using, contact
your local power company.
•
If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your retailer.
Operation safety
•
Before installing the motherboard and adding devices on it, carefully read all the
manuals that came with the package.
•
Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
•
To avoid short circuits, keep paper clips, screws, and staples away from connectors,
slots, sockets and circuitry.
•
Avoid dust, humidity, and temperature extremes. Do not place the product in any
area where it may become wet.
•
Place the product on a stable surface.
•
If you encounter technical problems with the product, contact a qualied service
technician or your retailer.
TABLE OF CONTENTS
1 Function Introduction
1.1 Model Specications.......................................................................................6
1.2 VBOX-3000 Illustration <Mainboard, System> ..............................................7
1.3 Memory Module Installation ...........................................................................9
1.4 Power Supply ...............................................................................................10
1.5 Ignition Power Management Quick Guide.................................................... 11
1.6 RJ-45 LAN Connector LEDs ........................................................................13
1.7 Connectors Guide ........................................................................................15
1.8 Jumpers Guide.............................................................................................22
2 System Installation
2.1 System Introduction .....................................................................................24
2.2 Opening Chassis with Battery Kit.................................................................25
2.3 Opening Chassis without Battery Kit............................................................26
2.4 Installing HDD with Battery Kit .....................................................................27
2.5 Installing HDD without Battery Kit ................................................................28
2.6 Installing Memory .........................................................................................29
2.7 Installing SDD ..............................................................................................30
2.8 Installing 3G Module ....................................................................................31
2.9 Installing SIM Card.......................................................................................32
2.10 Installing MINI PCI Express Expansion Card (WiFi Module) .......................33
2.11 Installing Battery Module ..............................................................................34
3 BIOS
3.1 Entering The BIOS .......................................................................................35
3.2 Main..............................................................................................................37
3.3 Advanced .....................................................................................................38
3.4 Boot ..............................................................................................................43
3.5 Security ........................................................................................................44
3.6 Chipset .........................................................................................................45
3.7 Power ...........................................................................................................46
3.8 Exit ...............................................................................................................48
5
English
4 System Resources
4.1 Watch Dog Timer Setting .............................................................................49
4.2 GPIO Settting ...............................................................................................50
4.3 AMI Post Code .............................................................................................51
4.4 Resource List ...............................................................................................55
5 Packing List
5.1 Packing List ..................................................................................................57
6
English
1 Function Introduction
1.1 Model Specifications
CPU • Intel Atom N270 1.6GHz Processor with 533MHz FSB
Chipset • Intel 945GSE + ICH7M
Memory • 1 x DDRII-533 SO-DIMM Up to 2GB
Display • Integrated Intel GMA-950 GFx Core in 945GSE MCH
ATA • 1 x Serial ATA port with 150MB/s HDD transfer rate
LAN Chipset • 2 x Intel 82574L Gigabit Ethernet
Watchdog • 1 ~ 255 level reset
Serial Port • Support 2 x RS-232 with 5V/12V Output (COM1 with RS-232422485)
USB Port • 3 x USB 2.0 ports
LAN • 2 x RJ45 ports for GbE
Video Port • 1 x DVI-I Female Connector for DVI-D and VGA Output
GPIO Port • Support 2 in and 2 out with Relay 12V / 100mA
Audio • Mic-in/Line-out
Expansion Bus • 2 x Mini-card slot
Antenna • 4 x SMA-type External Antenna Connectors for WLAN / UMTS / GSM /
GPRS / GPS / Bluetooth
Storage • 1 x 2.5" drive bay for SATA Type Hard Disk Drive / SSD
Qualication • CE, FCC
Power Input • 9V - 36V DC Power Input with 1500VDC Isolation
Power Protection • Automatics Recovery Short Circuit Protection
Power Management • Vehicle Power Ignition for Variety Vehicle
Power Off Control • Power off Delay Time Setting by Software, Default is 5 Mins
Backup Battery • Internal Battery Kit for 10 Mins Operating (Optional)
7
English
Operating Temp. • -20 ~ -70°C (SSD), ambient w/ air
Storage Temp. • -40 ~ 80°C
Relative Humidity• 10 ~ 90% (non-condensing)
Vibration • MIL-STD-810F, Method 514.5, Category 20, Ground Vehicle-Highway
Truck Storage • MIL-STD-810F, Method 514.5, Category 24, Integrity Test
Shock & Crash • Operating : MIL-STD-810F, Method 516.5, Procedure I, Trucks and
semi-trailers=40G (11ms), Non-Operating 80G with SSD
Crash Hazard • MIL-STD-810F, Method 516.5, Procedure V, Ground Equipment=100g
Construction • Aluminum alloy
Mounting • Supports both of wall-mount/VESA-mount
Weight • 1406g
Dimensions • 182 x 167.6 x 35mm
• 182 x 167.6 x 47mm (with battery kit)
1.2 VBOX-3000 Illustration
Mainboard
8
English
System
9
English
1.3 Memory Module Installation
The VBOX-3000 provide one 200pins SODIMM slot for DDR2 533MHz SDRAM memo-
ry modules and supports memory sizes up to 2GB.
These DIMM slots are inteded for memory modules.
DDR2 SO-DIMM Slot
200-pin, 1.8V
Installing Memory Module
1. Locate the DIMM1 SO-DIMM slot. Align the notch on the DIMM with the key on the
slot and insert the DIMM into the slot at 45-degree angle.
2. Push the DIMM gently forwards until the slot levers click and lock the DIMM in place.
Follow the same procedures to install the second DIMM if necessary.
3. To uninstall the DIMM, ip the slot levers outwards and the DIMM will be released
instantly.
Important
You can barely see the golden nger if the DIMM is properly inserted in the DIMM slot.
10
English
1.4 Power Supply
5V/12V HDD Power Connector : JPWR1
This connector provides power to the hard disk drives.
12V System Power Connector : PWR1
This connector provides power to the hard disk drives.
Important
Power supply of 200watts (and above) is highly recommended for system stability.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de De oficina de Sintrones
Sintrones
Sintrones DSS-1300 Manual de usuario
Sintrones
Sintrones VBOX-3611-4L Manual de usuario
Sintrones
Sintrones VBOX-3620-M12X Manual de usuario
Sintrones
Sintrones SBOX-2150 Manual de usuario
Sintrones
Sintrones VMT-825 Manual de usuario
Sintrones
Sintrones ABOX-5000PG1 Manual de usuario
Sintrones
Sintrones SBOX-2600 Manual de usuario
Sintrones
Sintrones SBOX-2110 Manual de usuario
Sintrones
Sintrones VBOX-3200 Manual de usuario
