8
Using an USB device
You can enjoy media files saved on an USB device by connecting the USB
device to the USB port of the unit.
ON UNIT ON REMOTE
1 connecting the USB device to the
USB port of the unit.
2.Select the USB function
––
–CD/USB
3.Select a file you want to play // /
– or
number key
4.Start your media playing.
5.To stop ,press
6.Before disconnecting the USB
device ,change to any other
function.
SOURCE
Compatible USB Devices
Mp3 player :Flash type Mp3 player.
USB Flash Drive: Devices that support USB2.0 or USB 1.1.
The USB function may not be available depending on device.
Look out for the follows
Do not extract the USB device while in operation.
For a large capacity USB ,it may take longer than a few minute to be searched.
To prevent data loss, back up all data.
Using NTFS file system is not supported.(Only FAT(16/32)file system is
supported)
Devices which require additional program installation when you have
connected it to a computer ,are not supported.
If you use a USB extension cable or USB hub, the USB device is not recognized.
This unit is not supported when the total number of files is 1000 or more.
External HDD,locked devices or hard type USB devices are not supported.
