Important Notes on Handling and Use
This machine is a precision device. To ensure the full performance of this machine, be sure to
observe the following important points. Failure to observe them may not only result in loss of
performance, but may also cause malfunction or breakdown.
Machine
您可以从以下网站下载获取机器信息
You can know more about printer from below website。
https://www.SinoColorDG.com/
Installation Requirement（Please read carefully）
Install in a quiet, stable location offering good operating conditions. An unsuitable location can cause
accident, fire, faulty operation, or breakdown.
Install the machine in a location that is level, stable, and able to bear the weight of the
machine.
The total weight of the machine may reach 80kg. Installation in an unsuitable location may cause a
major accident, including tip over, fall, or collapse.
Install in a clean, brightly lit location.
Conduct operations in a clean, brightly lit location. Working in a location that is dark or cluttered may
lead to an accident, such as becoming caught in the machine as the result of an inadvertent stumble.
Position so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emergency. Install the
machine next to an electrical outlet. Also, provide enough empty space to allow immediate access to
the electrical outlet.
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of combustion due to ink fumes.
Temperature and Humidity
Keep the room temperature between 20-30C, hundity 40-60%. Air conditioner and humidifier may be
required. Keep a distance from strong radiation field. The floor/working table must be level.
Maintain the specified temperature and humidity even when the machine is not in use. If
temperatures are too high or too low, it may cause malfunction.
Electrical requirement
Electrical requirement writes on a metal tag on the back of the printer. Find it to confirm if your printer
supports 220V or 110V. A transformer is needed if your country standard is different. The printer
must be well grounded.
UPS and voltage stabilizer is highly recommended.（Not included in printer price. Need to buy
separately）
Computer
Computer requirement
Basic requirement: CPU: 2.5 GHz
or higher Memory: 2GB or higher
Hard Disk: 200GB or higher
Operating system: Microsoft Windows XP / Windows 7 Ultimate Edition / Windows 10
Recommendatory requirement:
CPU: 3.5 GHz or higher
Memory: 4GB or higher
