Singer Futura CE-200E Manual de usuario
Service Manual
CE-200E
104 72 86-26
31 july 2007
Service Manual
Original issue
Feb. 2007
Page2/55
Model
CE-200E
INDEX
1. Removing cover for circuit board
2. Removing face, bottom and base covers (1)-(2)
3. Removing top cover and thread sensor cover
4. Removing rear cover
5. Removing front cover
6. Removing control panel assembly (1)-(2)
7. Test mode A of sewing machine with thread sensor deactivated.
8. Test mode B of sewing machine for continuous running (1)-(2)
9. Needle bar height
10. Needle threader height (1)-(2)
11. Presser Foot Height
12. Feed-dog height
13. Feed-dog timing (vertical movement)
14. Feed timing (horizontal movement)
15. Positioning of pulse motor for feeding at origin point
16. Adjustment of “0” feed (1)-(2)
17. Adjustment of needle at center position
18. Positioning of stopper for needle at right position
19. Needle timing to shuttle
20. Needle clearance to shuttle (1)-(2)
21. Positioning of zigzag pulse motor at origin point
22. Retaining bracket for bobbin case (1)-(2)
23. Upper thread tension unit
Service Manual
Original issue
Feb. 2007
Page3/55
Model
CE-200E
24. Position of buttonhole sensor lever
25. Tension of pulley belt
26. Oiling in shuttle area and needle bar
27. Tension of timing belt
28. Adjustment of needle position when machine stops
29. Sensors for thread breakage
30. Sensor-A on top cover
31. Sensor-B at check-spring on thread guide plate
32. Checking sensor when machine stops very often (1)-(2)
33. Flow chart of sensor function
34. Connecting embroidery unit to machine
35. Test mode B for sewing machine with embroidery unit
for continuous running
36. Recognizing hoop size
37. Mechanical origin point and maximum moveable area (1)-(2)
38. Wiring diagram
39.Main circuit board and functions of each connector
40.Control circuit board and functions of each connector (1)-(2)
41. Connecting wire to switch board
Service Manual
Original issue
Feb. 2007
Page4/55
Model
CE-200E
1. Removing cover for circuit board
１． Circuit board is located inside of rear cover.
Remove cover for circuit board by loosening screws as illustrated.
Service Manual
Original issue
Feb. 2007
Page5/55
Model
CE-200E
2-1. Removing face, bottom and base covers
１．Pull out cap in the center and remove screw.
２．Remove support leg by loosening two screws.
３．Remove bottom cover by loosening screw.
Service Manual
Original issue
Feb. 2007
Page6/55
Model
CE-200E
2-2. Removing face, bottom and base covers
４．Remove four screws on base cover.
５．Remove base cover.
Service Manual
Original issue
Feb. 2007
Page7/55
Model
CE-200E
3. Removing top cover and thread sensor cover
１．Remove top cover by loosening two screws.
２．Remove thread sensor cover by loosening a screw.
Service Manual
Original issue
Feb. 2007
Page8/55
Model
CE-200E
4. Removing rear cover
１．Remove top, face, bottom and base covers beforehand.
２．Remove rear cover by loosening four screws as illustrated below.
Use thin Phillips screw driver.
Service Manual
Original issue
Feb. 2007
Page9/55
Model
CE-200E
5. Removing front cover
１．Remover rear, bottom, base, top and face covers beforehand.
２．Loosen a screw on the bottom of thread guide plate.
３．Lay the machine on its back and remove two screws on the bottom.
４．Pull out the front cover taking care of wiring harnesses.
Service Manual
Original issue
Feb. 2007
Page10/55
Model
CE-200E
6-1. Removing control panel assembly
１．Remove support leg and base cover without removing rear and front covers.
２．Circuit board of control panel assy. is fixed under the control panel which is fixed
onto front cover with two screws
３．Lay the machine on its back and remove two screws by tuning them through
the hole of bracket.
４．Push up the control panel from the bottom of machine.
Tabla de contenidos
Otros manuales de Máquina de coser de Singer
Singer
Singer 96-45 Manual de usuario
Singer
Singer 1234 Manual de usuario
Singer
Singer Centurion 121D Manual de usuario
Singer
Singer 331K1 Manual de instrucciones
Singer
Singer 9970 Manual de usuario
Singer
Singer 2114 Manual de usuario
Singer
Singer 414 Manual de usuario
Singer
Singer 99-31 Manual de instalación y operación
Singer
Singer 500 SERIES Manual de instalación y operación
Singer
Singer 14 U44B/244B Manual
Singer
Singer 1805 Manual de usuario
Singer
Singer 107W50 Manual de usuario
Singer
Singer 338 Manual de usuario
Singer
Singer 410W10 Manual de usuario
Singer
Singer 251-4 Manual de usuario
Singer
Singer 138K1 Manual de instalación y operación
Singer
Singer 5160 Manual de usuario
Singer
Singer 57-14 Manual de usuario
Singer
Singer 7004 Manual de usuario
Singer
Singer 149-2 Guía de inicio rápido
