SAUK-VR-F-2022-01 6
https://www.sinalda.com
1.4 Features
Suitable for all electrical and electronic equipment, VR
Series Voltage Stabilisers / Conditioners continuously
monitor the incoming supply. Should the incoming voltage
rise or drop, the Stabilisers will automatically control the
output to ensure the voltage reaching the load equipment
remains within the load equipments intended requisite
input voltage window.
Protection against all too common everyday high energy
spikes and transient voltages typically introduced into the
utility mains supply by nearby disturbances resulting from
peak power demands or stop / start operation of electrical
machines.
Filtering designed to attenuate disruptive and damaging
electrical noise on the incoming supply. Ensures protection
against Common Mode electrical noise that occurs
between the neutral and earth, and also Normal (AKA.
Transverse / Differential) Mode electrical noise that occurs
between the line and neutral.
Basic protection of the load equipment from the potentially
damaging effects of high transient over-voltages
introduced indirectly into the utility mains supply following
a lightning strike.
SAUK-VR-F-2022-01 7
https://www.sinalda.com
A 10 second time delay on system restart designed to
prevent nuisance tripping. Ensures that load appliances are
not switched on-off repeatedly during fluctuations, nor are
they subjected to massive surges normally experienced
when power returns after power outages. For air
conditioning applications this feature should ensure
compressors have sufficient time to neutralise before re-
starting.
An extremely fast speed of response to voltage changes
ensures VR Series Voltage Stabilisers are ideal for virtually
all types of critical load applications.
Being based on the highly reliable microprocessor
controlled digital electronic design topology, VR Series
models are solid state with no moving parts making them
perfect for applications where an ‘Install and Forget’
solution is required.
With no user required replacable components, VR Series
Voltage Stabilisers / Conditioners offer a long design life
and are basically ‘Maintenance Free’ solutions.
Please Note: VR Series Voltage Stabilisers / Power Conditioners are NOT FOR
USE with life sustaining equipment, or any device where the power
requirements exceed the “Maximum Output Rating” listed in the Specification
table.
