Simplicity SSP210 Manual de usuario
DIGITAL QUIK PRESS
INSTRUCTION MANUAL
MODEL NO.:SSP210
Features of the Digital Quik Press.........................................1
Safety Reminders.....................................................................2
Part Identification.................................................................3-4
o reparation for use...........................................................5
o Filling the water tank.......................................................5
o Turning on the power.......................................................5
o Selecting the temperature.................................................6
o Steam Control Notes........................................................7
o Pressing............................................................................8
o Finishing Pressing / Storing The Unit..............................9
o Cleaning..........................................................................10
Tips for Success........................................................................11
Using the Pressing Cushion.....................................................12
Techniques for Pressing......................................................13-14
Troubleshooting..................................................................15-16
AA a
AA a
AA a
AA a
AA a
AA a
AA a
AA a
P
Steam Press Operation
CONTENTS
Simplicity Digital Quik Press Instruction Manual
Page1
Simplicity Digital Quik Press Instruction Manual
Features of the Digital Quik Press
Your Steam Press provides clean, professional results every time!
The pressing surface is seven times larger than most hand-held irons
Reduces ironing time by up to 50%
Multiple dry-heat and steam settings for all types of fabric
Use steam bursts to remove stubborn wrinkles
Variable temperature selection
Automatic shut-off safety feature while open or closed with audible alert
Over 100lbs. of even pressure ensures sharp, long lasting creases
Easy-to-use one hand operation
Protects delicate fabrics like silk
Non-stick padded ironing board cover
Non stick coating on pressing plate reduces starch build-up and eases cleaning
Locking handle makes unit portable
Stores upright
ØTo protect against the risk of electric shock, do not
immerse the appliance in water.
ØDo not let the cord hang over the edge of counters.
ØDo not allow the cord to touch hot surfaces.
ØAlways allow the appliance to cool for at least thirty
minutes before storing.
ØAlways put the appliance on a stable surface such as a table
or counter when using.
ØThe appliance has very hot surfaces. Do not move the
appliance without unplugging it first.
ØDo not allow unsupervised children to use the appliance.
ØAlways unplug the appliance from the outlet before filling
with or removing water. Be careful to avoid spilling water
on the appliance when filling.
ØUse distilled water in the appliance. Do not use products
containing alcohol in the appliance.
ØAlways unplug the appliance when not in use.
SAFETY REMINDERS
WARNING - Read all of the instructions and then save them for future reference.
THIS UNIT IS FOR HOUSEHOLD USE ONLY.
SAVE THESE INSTRUCTIONS
ØDo not use the appliance if the cord gets damaged. Return
the appliance or have the cord repaired by the manufacturer,
his service agent or a similarly qualified person.
ØDo not operate the appliance if it has been dropped or
damaged. Do not disassemble the appliance. Incorrect
reassembly can cause a risk of electric shock. Send it to an
authorized service center for repair.
ØDo not operate another high wattage appliance on the same
circuit.
ØThis appliance must be grounded. Do not alter the plug or
attempt to defeat this feature.
ØBe careful. Burns can occur from touching hot metal parts,
hot water or steam.
ØThis appliance IS NOT intended for use by young children or
infirm persons unless they have been adequately supervised by a
responsible person to ensure that they can use the appliance
safely.
ØYoung children should be supervised to ensure that they DO
NOT play with the appliance.
Page2 Simplicity Digital Quik Press Instruction Manual
PART IDENTIFICATION
The Pressing Handle raises and lowers the Pressing Plate.
By lowering the Pressing Handle until it reaches the lowest
point possible you automatically obtain maximum pressure.
The Locking Knob will lock together the Pressing Plate and
Ironing Board. Turn the Locking Knob to the locked position
to carry or store the Steam Press.
The Red Steam Burst Button on the left side of the handle
grip produces a burst of steam when pressed.
The Pressing plate is the temperature controlled surface that
heats and presses the fabric.
The Ironing Board is the padded surface that holds the
fabric during pressing.
The Power Light (Red) is illuminated when the unit is on.
The Ready Light (Green) goes off when the Press has
reached the selected temperature.
The Steam Ready Light (yellow) goes on when the unit is
ready to produce bursts of steam.
Press the POWER button to turn the press ON/OFF.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Press the SELECT button arrows to set the desired
temperature for each fabric. NOTE: Steam will only be
available on the three highest settings.
The Water Tank slides forward and is filled through holes
in the top. The Water Level can be seen through the front of
the tank. Slide the tank forward for a better view.
The Ironing Board Cover is removable and washable for
extended use.
10.
11.
12.
Page3
Simplicity Digital Quik Press Instruction Manual
The multiple function safety features of this appliance turn off electric power to the heater when the Pressing plate has been left against
the Ironing Board for about 10 seconds. If the Pressing plate is left in the open (up) position without use after approximately 15 minutes,
the unit will be automatically shut-off. In either case, to restore the unit, you have to press the POWER button again.
13. The Pressing Cushion is a fabric covered pad used for pressing gathered or
contoured areas such as sleeves, darts, and yokes.
14. Aplastic water Spray Bottle is used for dampening fabric before pressing.
15. A Water Containeris used for filling the Water Tank.
The following information is provided for service by a qualified electrician only:
Rated voltage: 120V~, 60Hz, 1350W
WARNING:
This appliance must be grounded. Use only the proper type outlet when plugging in the appliance. Do not attempt to override the
ground wire feature.
Page4 Simplicity Digital Quik Press Instruction Manual
STEAM PRESS OPERATION
STEP1 - PREPARATION FOR USE
Set the appliance on a sturdy work surface. Unlock the Locking Knob.
STEP 2 - FILLING THEWATERTANK
a. Always make sure the appliance is unplugged before filling the tank.
b. Fill the Water Tank with the Pressing Plate lifted to the raised (up) position.
Slide the Water Tank towards the front of the unit. It will not come
completely out so do not force it to do so. Using the Water Container,
slowly pour the distilled water into the Water Tank Fill Holes(C).
c. Be careful to avoid spilling water onto the Steam Press when filling.
d. Slide the Water Tank back into its recessed position.
STEP 3 - TURNING ONTHE POWER
a. Make sure the Locking Knob (D) is in the UNLOCK position allowing
free movement of the Pressing Plate before plugging in the appliance.
b.Lift the Pressing plate to the fully raised (up) position.
c. Plug the appliance into an electric outlet.
d.Press the POWER button and the Red Power light will shine.
Page5
Simplicity Digital Quik Press Instruction Manual
STEP 4 SELECTING THETEMPERATURE
Press the SELECT arrow buttons to choose the kind of fabric you wish to press. Press to move selection to higher setting and
Press to move selection to lower setting.
a. Examine the garment label if unsure and look up the type on the chart.
IMPORTANT NOTE: If you can not determine the type of fabric, begin with the lowest setting and increase the temperature as
desired until you obtain the proper results.
b. When the Green Ready Light goes off, the Pressing Plate has reached the temperature for the desired setting.
c. When changing the setting from a higher selection to a lower setting allow several minutes for the Pressing Plate to cool
sufficiently after making the change.
IMPORTANT NOTE: You may find it more efficient to arrange your fabrics from those requiring the lowest setting to those
requiring the highest setting and proceed accordingly. This will avoid any unnecessary delay or wait for
the Pressing Plate to cool.
Page6 Simplicity Digital Quik Press Instruction Manual
STEP 5 - STEAM CONTROL
IMPORTANT NOTE: Steam is produced only when the Yellow Steam
Ready light is on.
IMPORTANT NOTE: If this is the first time you are using the Steam Press
or you have been storing it for some time, lift the
Pressing plate into the raised position and press the
Steam Burst Button several times until the steam
begins to flow.
IMPORTANT NOTE: The Steam Burst function can only be used when the
Steam Ready Light is on AND the steam press is in
a slightly opened position. Do not use the Steam
Burst function when the steam press is closed, or
you may damage the unit.
IMPORTANT NOTE: Do not press the Steam Burst Button for more than 5
seconds or water may drip on your garment.
Page7
Simplicity Digital Quik Press Instruction Manual
IMPORTANT NOTE: If you forget to raise the Pressing Plate or become distracted, the machine will give a warning beep and
automatically shut-off heating after approximately 10 seconds. The steam press will be completely shut-off after
15 minutes of no activity with the press in the open position.
STEP 6 - PRESSING
a. Lift the Pressing Handle (A). The Pressing Plate (B) moves to the up
position.
b. Carefully arrange the garment to be pressed onto the Ironing Board (C).
c. Grasp the handle of the Pressing Plate(A) and lower it onto the Ironing
Board (C), capturing the garment between the two halves of the Steam
Press. For light duty Pressing, simply lowering the handle and allowing the
Pressing Plate to rest on the Ironing Board will be sufficient. Return to the
open position. For heavier duty pressing, continue to grasp the handle and
press downward until the Pressing Plate is pushed to its lowest position,
then open the press.
d. If the temperature is set high enough you may give the fabric a burst of
steam by pressing the Steam Burst Button (D) to remove stubborn wrinkles.
Lower the pressing plate until it is about two inches from the garment.
Press the Steam Burst Button for about 3-5 seconds. After releasing the
Steam Burst Button you may fully lower the pressing plate.
NOTE: Do not press the Steam Burst Button when the pressure plate is
in its lowest (closed) position.
e. After a few seconds, lift the handle and raise the Pressing Plate back to the
raised position.
Page8 Simplicity Digital Quik Press Instruction Manual
Tabla de contenidos
