Simplex LT0290 Manual de usuario
Document No.: 4100-M004 June 1997 Issue 1.0
4120 NETWORK FIRE INDICATOR PANEL
2500 NETWORK DISPLAY UNIT
(NDU)
OPERATOR MANUAL (LT0290)
Page ii SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL
OPERATOR MANUAL
Document No.: 4100-M004 June 1997 Issue 1.0
GLOSSARY OF STANDARD TERMS
The following abbreviations are used throughout this manual:
ACF: Ancillary control facility.
"Ackd": Display abbreviation for acknowledged condition.
AVF: Alarm Verification Facility.
ALM: Display abbreviation for alarm condition.
AS1668: Australian Standard AS1668 specifying the use of mechanical
ventilation and air-conditioning in buildings.
FIP: Fire Indicator Panel.
"Isol": Display abbreviation for Isolated condition.
LCD: Liquid Crystal Display.
LED: Light Emitting Diode.
MANUFACTURERS DETAILS
APPROVALS: AUSTRALIAN STANDARD AS1603.4
SSL CERTIFICATE OF COMPLIANCE NUMBER 127
The 4100 Fire Indicator Panel is manufactured by:
Simplex International Time Equipment Pty Ltd
140 Old Pittwater Road
Brookvale N.S.W 2100 Australia
Phone: (02)-9466-2333
Notice: The contents of this document is subject to change without notice.
SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL Page iii
OPERATOR MANUAL
Document No: 4100-M004 June 1997 Issue 1.0
TABLE OF CONTENTS
COMPATIBLE ACTUATING DEVICES................................................................... vii
SIMPLEX RANGE:.......................................................................................................vii
HOCHIKI RANGE: CONVENTIONAL DETECTORS.........................................................vii
OLSEN RANGE: CONVENTIONAL DETECTORS ..........................................................viii
APOLLO: CONVENTIONAL DETECTORS......................................................................viii
PANELECT/PANASONIC: CONVENTIONAL DETECTORS ..........................................viii
COMPATIBLE BATTERIES...................................................................................... ix
SPECIFICATION........................................................................................................ x
GENERAL......................................................................................................................x
EXPANSION MODULES................................................................................................x
INDICATORS AND DISPLAY.........................................................................................xi
KEYPAD CONTROLS...................................................................................................xi
SOFTWARE FEATURES.............................................................................................xii
SECTION 1 - SYSTEM OVERVIEW.......................................................................... 1
1.1 INTRODUCTION TO NETWORKING.......................................................................1
1.2 SYSTEM INTRODUCTION.......................................................................................2
1.2.1 4120 Fire Indication Panel..............................................................................2
1.2.2 2500 Network Display Unit..............................................................................3
1.2.3 2500 NDU with Status Command Centre .......................................................4
1.3 SYSTEM OPERATING DESCRIPTION....................................................................4
1.3.1 Operator Log In/Log Out Procedures .............................................................5
1.3.1.1 Access Level Log-In Procedure....................................................................6
1.3.1.2 Access Level Log Out Procedure................................................................. 7
1.3.2 HANDLING ABNORMAL CONDITIONS.........................................................7
1.3.2.1 The <DISPLAY TIME> Key.............................................................................9
SECTION 2 - ALARM CONDITIONS.......................................................................10
2.1 GLOBAL ACKNOWLEDGE OPERATION DURING ALARM CONDITIONS .........10
2.2 INDIVIDUAL ACKNOWLEDGE DURING ALARM CONDITIONS.........................12
2.3 ESSENTIAL ALARM CONDITION KEYS ..............................................................13
2.3.1 Alarm Ack (Acknowledge).............................................................................13
2.3.2 System Reset...............................................................................................13
2.4 HOW TO ISOLATE / DE-ISOLATE A ZONE..........................................................14
2.5 HOW TO ISOLATE / DE-ISOLATE INDIVIDUAL DEVICES...................................16
2.5.1 Disabling Individual Points/Devices ..............................................................16
2.5.2 Enabling Individual Points/Devices...............................................................17
SECTION 3 - FAULT CONDITIONS........................................................................19
3.1 GLOBAL ACKNOWLEDGE OPERATION DURING FAULT CONDITIONS...........19
3.2 INDIVIDUAL ACKNOWLEDGE OPERATION DURING FAULT CONDITIONS .....20
3.4 ESSENTIAL FAULT CONDITION KEYS................................................................21
3.4.1 Fault Acknowledge Key................................................................................21
3.4.2 System Reset to Clear Faults.......................................................................22
Page iv SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL
OPERATOR MANUAL
Document No.: 4100-M004 June 1997 Issue 1.0
3.5 FAULT INDICATIONS FOR TRUEALARM™ SENSORS..........................................22
3.5.1 Dirty Fault Indication....................................................................................22
3.5.2 Excessively Dirty Fault Indication..................................................................23
3.5.3 Self Test Abnormal Fault Indication..............................................................23
SECTION 4 - RS-232 INTERFACE.......................................................................... 24
4.1 RS-232 PORT ACCESS LEVELS..........................................................................24
4.2 THE VIDEO TERMINAL.........................................................................................24
4.2.1 CRT Function Key Definitions.......................................................................25
4.2.2 Set-Up Procedure.........................................................................................25
4.3 CRT SCREEN DISPLAYS......................................................................................25
4.3.1 CRT Main Menu Screen...............................................................................26
4.3.2 Acknowledge Screen....................................................................................26
4.3.3 Log In Screen...............................................................................................27
4.3.4 Historical Log Screen ...................................................................................28
4.3.5 Status Screen...............................................................................................29
4.4 THE SYSTEM PRINTER........................................................................................30
SECTION 5 - MAPNET II®....................................................................................... 31
5.1 MAPNET II®ALPHANUMERIC DISPLAYS............................................................31
5.2 MAPNET II®POINT ADDRESSING........................................................................31
5.2.1 How to Display a MAPNET II®System Point.................................................31
5.2.2 What To Do If a MAPNET II®Point Will Not Reset.......................................31
SECTION 6 - ADVANCED FUNCTIONS ................................................................. 32
6.1 CONTROL KEYS...................................................................................................32
6.2 FUNCTION KEYS..................................................................................................33
6.3 HOW TO SET TIME AND DATE ............................................................................33
6.4 HOW TO ESCAPE FROM MENU ..........................................................................35
6.5 POINT CONTROL WITH THE FUNCTION KEY ....................................................35
6.6 DISPLAY/ACTION KEYS.......................................................................................36
6.6.1 Function Key Operation................................................................................37
6.6.2 MENU Key....................................................................................................37
6.6.3 PREVIOUS Key............................................................................................38
6.6.4 NEXT Key.....................................................................................................38
6.6.5 LAMP TEST Key ..........................................................................................38
6.6.6 Action Keys ..................................................................................................38
6.6.7 Entry Keypad................................................................................................39
6.7 HOW TO ENTER A PREFIX ..................................................................................39
6.8 HOW TO DISPLAY MAPNET II®POINT STATUS .................................................41
6.9 HOW TO DISPLAY THE SENSITIVITY OF A TRUEALARM™SENSOR.................43
6.10 ADDITIONAL KEYS.............................................................................................45
6.10.1 Enter...........................................................................................................45
6.10.2 Clear...........................................................................................................45
6.10.3 Hyphen.......................................................................................................45
6.10.4 Delete.........................................................................................................46
6.11 POINT SELECTION.............................................................................................46
6.11.1 Selecting Points Using Lists .......................................................................46
6.11.2 Selecting Points Using the Keyboard..........................................................46
6.11.3 Selecting Additional Lists............................................................................46
SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL Page v
OPERATOR MANUAL
Document No: 4100-M004 June 1997 Issue 1.0
6.12 OPERATOR ACCESS LEVELS...........................................................................47
6.13 POWER UP SEQUENCE.....................................................................................48
SECTION 7 - SYSTEM TEST PROCEDURES........................................................49
7.1 LAMP TEST...........................................................................................................49
7.1.1 Walk Test™..................................................................................................49
7.2 HOW TO TURN A POINT OFF ..............................................................................49
7.3 HOW TO TURN A POINT ON................................................................................50
7.4 HOW TO RETURN A POINT TO AUTO.................................................................51
7.5 WHAT TO DO IN CASE OF SYSTEM MALFUNCTION.........................................52
SECTION 8 - MAINTENANCE PROCEDURES.......................................................53
8.1 WEEKLY TESTS....................................................................................................53
8.2 MONTHLY TESTS .................................................................................................54
8.3 ANNUAL TESTS....................................................................................................55
Page vi SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL
OPERATOR MANUAL
Document No.: 4100-M004 June 1997 Issue 1.0
PANEL DETAILS
panel sticker
4100 Panel supplied by
Installation location
Contract/Job Number
As installed FIP System
drawing number
Panel Installation date
Panel Commissioned date
Maintenance Company
Telephone
Service Contact
SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL Page vii
OPERATOR MANUAL
Document No: 4100-M004 June 1997 Issue 1.0
COMPATIBLE ACTUATING DEVICES
The following detectors have been approved as compatible devices for use with the
4100 FIP.
SIMPLEX RANGE:
1) Analog Addressable Sensors
4098-9701 High / Very High sensitivity Photoelectric smoke
4098-9716 Ionisation smoke
4098-9731 Type A / Type B Heat
4098-9781 Addressable LED Indicating base
4098-9782 Addressable LED Indicating base with Sounder
4098-9783 Addressable LED Indicating base with Relay driver
2) Conventional Detectors
4098-9413 Heat detector Type A
4098-9414 Heat detector Type B
4098-9415 Heat detector Type C
4098-9416 Heat detector Type D
2098-9201 Photoelectric smoke detector
2098-9576 Ionisation smoke detector
2098-9211 Universal base.
HOCHIKI RANGE: Conventional Detectors
DCA-B-60R MK V Type A heat detector
DFE-60B Type B heat detector
DCA-B-90R MK 1 Type C heat detector
DFE-90D Type D heat detector
DFG-60BLKJ Type B heat detector
SPA-AB Beam type smoke detector
SIH-AM Ionisation smoke detector
SLK-A Photoelectric smoke detector
SLG-AM MK 1 Photoelectric smoke detector
HF-24A MK 1 Ultraviolet smoke detector
YBC-R/3A Plain - non indicating base
YBF-RL/4AH4 LED Indicating base
Page viii SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL
OPERATOR MANUAL
Document No.: 4100-M004 June 1997 Issue 1.0
OLSEN RANGE: Conventional Detectors
B111B Beam type smoke detector
C24B Ionisation smoke detector
C29B Ionisation smoke detector
FW81B Heat detector cable
P24B Photoelectric smoke detector
P29B Photoelectric smoke detector
R24B Dual spectrum infrared flame detector
T54B Probe type heat detector type E
T56B Heat detector types A,B,C,D with Z55B base
T56B Heat detector types A,B,C,D with Z54B base
V41B/V42B Ultraviolet flame detector
APOLLO: Conventional Detectors
Heat detector Type A
Heat detector Type B
Heat detector Type C
Heat detector Type D
Series 20 Photoelectric smoke detector
Series 30 Ionisation smoke detector
PANELECT/PANASONIC: Conventional Detectors
PFS-A Heat detector Type A
PFS-B Heat detector Type B
PFS-C Heat detector Type C
PFS-D Heat detector Type D
PFS-P Photoelectric smoke detector
PFS-I Ionisation smoke detector
SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL Page ix
OPERATOR MANUAL
Document No: 4100-M004 June 1997 Issue 1.0
COMPATIBLE BATTERIES
The following series of batteries are compatible with the 4100 FIP:
(1) Power-Sonic PS12 series
(2) Sonnenschien A200 series
(3) Sonnenschien A300 series
(4) Yuasa NP series
Page x SIMPLEX 4120 NETWORK FIRE INDICATOR PANEL
OPERATOR MANUAL
Document No.: 4100-M004 June 1997 Issue 1.0
SPECIFICATION
GENERAL
System Capacity 1,000 points of addressable input / output devices or
conventional zones.
Cabinet Size(mm) Dependent on system configuration
Cabinet Material 1.5mm Mild grade steel
Cabinet Finish Powder coated
Cabinet Colour Magnolia Ripple
Mounting Wall mount
Mains Input 240V AC, +6%,-10%, 50Hz
Internal Power Supply 24V DC @ 6.5A
Standby Battery 24V sealed lead acid up 110Ah
Battery Charger 27.6V DC (nominal) @ 3.5A,
PSU Supervision Charger high/low, Battery low/fail
Temperature -5 C to 45 C
Humidity 10% to 90% RH non-condensing.
EXPANSION MODULES
Maximum Number 119 modules
4100 - 5002 Conventional zone module
Eight zone circuits per module
Supports standard 20V detectors plus normally open
contact devices
4100 - 3003 Eight CPU controlled auxiliary relays per module
SPDT contacts rated for 3 amps @ 24VDC or 30VAC
4100 - 0113 RS-232 / 2120 Communications Module
Provides two RS-232-C outputs for remote printers
and/or CRT
Five RS-232-C ports maximum per 4100 system
Can be configured for communication with a host 2120
system
Can be configured as a Computer Port for
communications to a remote system i.e. BMS or BAS
Systems
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Equipos industriales de Simplex
Simplex
Simplex 2120 Guía de configuración
Simplex
Simplex Trident Manual de usuario
Simplex
Simplex Full-Size Fuelport Manual de usuario
Simplex
Simplex LBD Series Manual de usuario
Simplex
Simplex 4090-9006 Guía del usuario
Simplex
Simplex 4604-9201 Guía rápida
Simplex
Simplex STS Manual de usuario
Simplex
Simplex VSH SUPER Manual
Simplex
Simplex 2120 Guía de configuración
Simplex
Simplex STS DAY TANK Manual de usuario
