Simons Voss Technologies SmartBridge Manual de usuario
SmartBridge
Manual
11.09.2019
Contents
1 General .......................................................................................................................................................... 3
2 General safety instructions.....................................................................................................................4
3 Product-specific safety instructions.................................................................................................... 7
4 Scope of delivery........................................................................................................................................8
4.1 Accessories .........................................................................................................................................................8
5 Connections.................................................................................................................................................9
6 Installation ................................................................................................................................................. 10
6.1 Setting up SmartBridges..............................................................................................................................11
6.1.1 A SmartBridge.................................................................................................................................. 11
6.1.2 Two or more SmartBridges...................................................................................................... 12
6.2 Antenna ...............................................................................................................................................................12
7 Initial operation..........................................................................................................................................15
7.1 SmartBridge in MobileKey ......................................................................................................................... 15
7.1.1 Setting up SmartBridges ...........................................................................................................15
7.1.2 Deleting SmartBridge..................................................................................................................16
8 Maintenance...............................................................................................................................................17
9 Signalling .................................................................................................................................................... 18
10 Fault rectification..................................................................................................................................... 19
10.1 Reset .................................................................................................................................................................... 19
11 Technical specifications .........................................................................................................................21
11.1 Optional external antenna ........................................................................................................................23
11.1.1 Electrical specifications ............................................................................................................23
11.1.2 Connection specifications........................................................................................................24
11.1.3 Mechanical specifications and dimensions ....................................................................24
12 Declaration of conformity .....................................................................................................................25
13 Help and other information ................................................................................................................. 26
SmartBridge (Manual) Contents
2 / 28
1 General
With the SmartBridge, you can manage and programme the network-
capable components of the MobileKey system wirelessly:
Programme remotely. You no longer have to go physically to the lock,
but can programme the changes to the components directly via
WaveNet.
Import access lists remotely. If you have many locks with an access
protocol, you save a lot of time by being able to read out all locks
centrally.
Perform emergency openings. Allow users access without having to
physically go to the lock in question.
IMPORTANT
Compatibility with MobileKey
The device is also used with other firmware in other product families. You
can use the device with this firmware (=SmartBridge) only for MobileKey.
Check the article number.
9If the part number is MK.SMARTBRIDGE, it is a SmartBridge.
SmartBridge (Manual) 1. General
3 / 28
2 General safety instructions
WARNING
Blocked access
Access through a door may be blocked due to incorrectly fitted and/or in-
correctly programmed components. SimonsVoss Technologies GmbH is
not liable for the consequences of blocked access such as access to in-
jured or endangered persons, material damage or other damage!
WARNING
Blocked access through manipulation of the product
If you change the product on your own, malfunctions can occur and access
through a door can be blocked.
Modify the product only when needed and only in the manner described
in the documentation.
ATTENTION
Damage resulting from electrostatic discharge (ESD)
This product contains electronic components that may be damaged by
electrostatic discharges.
1. Use ESD-compliant working materials (e.g. Grounding strap).
2. Ground yourself before carrying out any work that could bring you into
contact with the electronics. For this purpose, touch earthed metallic
surfaces (e.g. door frames, water pipes or heating valves).
ATTENTION
Damage resulting from liquids
This product contains electronic components that may be damaged by li-
quids of any kind.
Keep liquids away from the electronics.
ATTENTION
Damage resulting from aggressive cleaning agents
The surface of this product may be damaged as a result of the use of un-
suitable cleaning agents.
Only use cleaning agents that are suitable for plastic or metal surfaces.
SmartBridge (Manual) 2. General safety instructions
4 / 28
ATTENTION
Damage as a result of mechanical impact
This product contains electronic components that may be damaged by
mechanical impacts of any kind.
1. Avoid touching the electronics.
2. Avoid other mechanical influences on the electronics.
ATTENTION
Damage as a result of overcurrent or overvoltage
This product contains electronic components that may be damaged by ex-
cessive current or voltage.
Do not exceed the maximum permissible voltages and/or currents.
ATTENTION
Damage due to polarity reversal
This product contains electronic components that may be damaged by re-
verse polarity of the power source.
Do not reverse the polarity of the voltage source (batteries or mains
adapters).
ATTENTION
Interference to operation as a result of radio interference
This product may be subject to interference from electromagnetic fields.
Do not place the product directly next to devices that can cause
electromagnetic interference (switching power supplies!).
ATTENTION
Communication interference due to metallic surfaces
This product communicates wirelessly. Metallic surfaces can significantly
reduce the reach of the product.
Do not place the product on metallic surfaces.
SmartBridge (Manual) 2. General safety instructions
5 / 28
IMPORTANT
Intended use
SimonsVoss-products are designed exclusively for opening and closing
doors and similar objects.
Do not use SimonsVoss products for any other purposes.
IMPORTANT
Modifications or further technical developments cannot be excluded and
may be implemented without notice.
IMPORTANT
This documentation has been compiled based on the best knowledge
available to us. Nevertheless, errors cannot be ruled out. SimonsVoss
Technologies GmbH is not liable in such cases.
IMPORTANT
Should there be differences in the content of other language versions of
this documentation, the German version applies in cases of doubt.
IMPORTANT
You must follow all instructions precisely when connecting and installing
the product. The person installing the system should hand these instruc-
tions as well as any maintenance instructions over to the user.
SmartBridge (Manual) 2. General safety instructions
6 / 28
3 Product-specific safety instructions
CAUTION
Risk of burns due to hot circuit board
If you power the device with Power-over-Ethernet (PoE), the board can be-
come very hot.
Allow the unit to cool down before opening the housing.
CAUTION
Risk of electric shock from connected power supply
The device is supplied with power during operation. Opening the housing
and touching live parts may result in electric shock.
1. If the power supply is connected, do not open the housing.
2. Disconnect the power supply (or disconnect the network cable) before
opening the housing.
IMPORTANT
Further documentation
Further documentation on MobileKey products can be found on the Si-
monsVoss website (https://www.simons-voss.com/de/downloads/doku-
mente.html).
SmartBridge (Manual) 3. Product-specific safety instructions
7 / 28
4 Scope of delivery
SmartBridge: Cover, base plate with circuit board and three pre-
assembled strain reliefs
Removable sticker with MobileKey-ID
Quick guide
4.1 Accessories
You can use optionally available accessories to adapt your device to
different applications.
Order code Name Purpose
ANTENNA.EXT.868 External antennas
You can connect the ex-
ternal antenna to the
FME connector of the
circuit board and im-
prove reception (see
Antenna [}12]
).
POWER.SUPPLY.2 Power supply (12 VDC,
500 mA)
You can use this power
supply unit to power
your device.
SmartBridge (Manual) 4. Scope of delivery
8 / 28
5 Connections
DC In RJ45 ANT
IO
DC In GND
+ 3.3 V
Analog Input
Unused
DI 3
DI 2
DI 1
O 3
O 2
O 1.NC
O 1.NO
O 1.COM
IMPORTANT
IO connector only for RouterNode 2
You can only use the connectors of the IO connector at RouterNode 2.
Connection Meaning
DC In
Pin connector Power supply with round
plug connector
Terminal block: GND Power supply with single
wires - Earth connection
Terminal block: +3.3 V Power supply with single
wires - Positive pole
RJ45 Network connection
ANT
Connector for external an-
tenna (see
Antenna
[}12]
)
SmartBridge (Manual) 5. Connections
9 / 28
6 Installation
The device can be mounted horizontally or vertically. You can carry out the
horizontal mounting easily and safely with the integrated mounting holes.
ATTENTION
Adverse effect on reception due to interferences
This device communicates wirelessly. Wireless communication can be af-
fected or may fail due to metal surfaces or interference.
1. Do not fit the device to metal surfaces.
2. Keep the device away from sources of electrical or magnetic
interference.
ATTENTION
Unauthorised access
If the electrical contacts in the device are short-circuited by unauthorised
persons, undesired reactions may occur.
Mount the device in an environment that is protected from unauthorised
access.
ATTENTION
Malfunctions due to weather conditions
This device is not protected against splash water and other weather influ-
ences.
Mount the device in an environment that is protected from the weather.
Wiring to device
You can install the cables both on (surface-mounted) and under (flush-
mounted) plaster.
If you install the cables under the plaster, then use the opening
integrated in the base plate.
If you lay the cables on the plaster, then you must modify the housing.
SmartBridge (Manual) 6. Installation
10 / 28
Otros manuales para SmartBridge
1
Tabla de contenidos
Otros manuales de Hardware de red de Simons Voss Technologies
Manuales populares de Hardware de red de otras marcas
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manual de usuario
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manual de usuario
Yudor
Yudor YDS-16 Manual de usuario
D-Link
D-Link ShareCenter DNS-320L Manual de usuario
Samsung
Samsung ES1642dc Instrucciones de uso
Honeywell Home
Honeywell Home LTEM-PV Instrucciones de montaje
