5
2. Using the Tablet for the first time
2.1 Charge the Tablet
The Tablet comes with a built-in rechargeable lithium-polymer battery. It is recommended to fully
charge the battery before first use.
To charge the Tablet, plug the charger to an electrical socket
with the other end of the adaptor inserted to the charging slot
on the Tablet.
You may continue to use the Tablet while it is charging. You may
stop charging any time even when it is not 100% charged.
If the Tablet is powered on, the battery charge status will be
indicated at the top right corner of the screen by the battery
meter. If the Tablet is powered off, it will charge until the
battery is full.
When the battery life runs out, the battery meter turns red and the device needs to be
charged soon. It will continue to operate as usual until it drops to 0%.
Disconnect the power adaptor when the Tablet is fully charged.
Note: When the Tablet is connected to a computer via the USB cable, the battery will charge via the
USB socket, but at a much slower rate than via the DC 5V power adaptor.
Do not use any other power adaptors than the one supplied. Using an incompatible power
adaptor could damage the tablet and poses the potential risk of fire.
2.2 Expand memory with Micro SD/ SDHC Memory Card
Your tablet features a 16 GB built-in flash memory, which can be expanded using a Micro SD card
(not included). You may use any Micro SD or Micro SDHC card, up to 32GB capacity.
To use the memory card as media storage, transfer media files (videos, music and photos) from your
computer to your micro SD card, then insert it into The tablet as described below.
To insert and use a Micro SD card
Remove the cover on the left at the back of the Tablet. Align the memory card
with the TF card slot and push it into the spring-loaded slot until you hear a click.
The metal contacts of the memory card should face up towards the LCD screen, i.e.
side with words face up towards the back of the Tablet as shown in the picture.
Do not attempt to insert objects other than a micro SDHC memory card
into the card slot. A compatible memory card should fit easily into the card
slot. If you encounter resistance, check the alignment of the card. Do not
attempt to force the card in.