Product characteristics
♣ This product satisfies relevant technical requirements for customer's safety.
♣ This product is energy saving product improving basic energy consumption
of boiler.
♣ This vapour generator has four major safety devices.
- automatic pressure cutting switch attached
- safety valve that can discharge pressure in the vapour container in case of
excessive pressure generated because of product abnormality
- two automatic temperature controllers preventing (over temperature attached) do
you mean of over heat?
- the fuser installed internally preventing (over temperature) (over heat) beause of
failure of thermolator
♣ There are two specifications of this vapour generator, 120V and 220V.
- Before it is connected to the socket for use, whether rated voltage is consistent
with voltage required by the product must be confirmed.
♣ When electromagnetic valve is started, 2.5 ~ 4.0 BAR vapour bursts out
through the iron. If the water in pressure container is used up, no vapour
♣ This product includes accessories of hook, measuring cup, funnel,
measuring rod etc.
♣ Refer to Page 4 for other product specifications.
Refer to Operation Instructions of the product for precautions and use
method.
♣ When you are using , if water bottle without water, motor temperture
become hot, product stop work.Give the water after one hour become
work.Use this product( keep water in bottle).
5
Repair or disassembly of the product at will is not permitte
The agent nearby must be contacted to repair!
