107 114
115 122
123 127
128 190
191 192
193 255
0 127
128 190
191 192
193 255
CH.13
CH.14
CH.15
CH.16
CH.17
CH.18
CH.19
CH.20
0 1 0
11 145
146 150
151 200
201 205
206 255
000 010
011 255
0 127
128 130
131 171
172 211
212 251
252 255
0 255
0 1 5
16 63
64 111
112 159
160 207
208 255
0 255
0 255
GOBO7 SHAKE (SPEED 1 —> 100%)
GOBO8 SHAKE (SPEED 1 —> 100%)
WHITE
ROTATING GOBO FLOWING WATER EFFECT (SPEED 100%—>1)
STOP
ROTATING GOBO FLOWING WATER EFFECT (SPEED 1—>100%)
GOBO ROTATING
0-360°
ROTATING GOBO POSITIVE ROTATION (SPEED 100%—>1)
STOP
ROTATING GOBO REVERSE ROTATION (SPEED 1—>100%)
PRISM
WHITE
PRISM 0-360°
STOP
PRISM INSERT AND POSITIVE ROTATION (SPEED 100%—>1)
STOP
PRISM INSERT AND REVERSE ROTATION (SPEED 1—>100%)
FROST
WHITE
FROST→100%
IRIS
IRIS 100%-0%
IRIS→OFF
IRIS FADE IN AND FAST OUT
IRIS FAST IN AND FADE OUT (SPEED 1—>100%)
IRIS FADE IN AND FAST OUT RANDOMLY (SPEED 1—>100%)
IRIS→OFF
ZOOM
AUTO FOCUS
NO FUNCTION
5M
10M
15M
20M
25M
MANUAL FOCUS
DIMMER
IMPORTANT
【ALWAYS READ THE USER MANUAL BEFORE OPERATION. 】
【PLEASE CONFIRM THAT THE POWER SUPPLY STATED ON THE PRODUCT IS THE
SAME AS THE MAINS POWER SUPPLY IN YOUR AREA.】
ATTENTION
● This product left the place of manufacture in perfect condition. In order to
maintain this condition and for safe operation, the user must always follow
the instructions and safety warnings described in this user manual.
● Avoid shaking or strong impacts to any part of the equipment.
● Make sure that all parts of the equipment are kept clean and free of dust.
● Always make sure that the power connections are connected correct and
secure.
● If there is any malfunction of the equipment, contact your distributor
immediately.
● When transferring the product, it is advisable to use the original packaging
in which the product left the factory.
● Shields, lenses or ultraviolet screens shall be changed if they have become
damaged to such an extent that their effectiveness is impaired.
● The lamp (LED) shall be changed if it has become damaged or thermally
deformed.
Caution, risk of electric shock
The light source contained in this luminaire shall only be replaced
by the manufacturer or his service agent or a similar qualified person.
● This product must be installed by a qualified professional.
● Always operate the equipment as described in the user manual.
● A minimum distance of 0.5m must be maintained between the equipment
and combustible surface.
● The product must always be placed in a well ventilated area.
● Always make sure that the equipment is installed securely.
● Do not stand close to the equipment and stare directly into the LED light
source.
● Always disconnect the power supply before attempting and maintenance.
● Always make sure that the supporting structure is solid and can support the
combined weight of the products.
● The earth wire must always be connected to the ground.
● Do not touch the power cables if your hands are wet.
1.3 Safety warning
ATTENTION !!
