SIIG CE-H24C11-S1 Manual de usuario
4x4 HDMI Matrix
+ Video-Wall Processor
User Manual
04-1169A P/N: CE-H24C11-S1
2
Safety and Notice
The 4x4 HDMI Matrix + Video-Wall Processor has been tested for
conformance to safety regulations and requirements, and has been
certified for international use. However, like all electronic equipment,
the 4x4 HDMI Matrix + Video-Wall Processor should be used with
care. Please read and follow the safety instructions to protect yourself
from possible injury and to minimize the risk of damage to the unit.
• Follow all instructions and warnings marked on this unit.
• Do not attempt to service this unit yourself, except where
explained in this manual.
• Provide proper ventilation and air circulation and do not use near
water.
• Keep objects that might damage the device and assure that the
placement of this unit is on a stable surface.
• Use only the power adapter and power cords and connection
cables designed for this unit.
• Do not use liquid or aerosol cleaners to clean this unit.
• Always unplug the power to the device before cleaning.
Thank You
for your purchase!
3
Features
• HDMI 1.3 & HDCP 1.2 compliant
• Allows any HDMI display to view any HDMI source at any time
• Fast response time for channel switch
• Supports 7.1 channel digital audio
• Four HDMI outputs from 640x480 to 1920x1200
• Supports default HDMI EDID and learns the EDID of displays
• The matrix master can switch every output channels to any HDMI
inputs by push-in button, RS-232 control, and Ethernet control
• Supports HDMI input from 640x480 to 1920x1080@60 , interlaced
or progressive
• Resize, position, zoom for each HDMI output video
• Each HDMI output has an independent controllable display area
• Image parameters and layouts are automatically saved in ash
memory of the device and can be recalled for later use
• Several image parameters and layouts can be saved in computers
and can be loaded for later use
• Firmware upgradable for new features and technology
enhancements
• User-selectable output settings, up to 1920x1200
• Supports individual propagation delay on each display to have the
best visual perception
Package contents
• 4x4 HDMI Matrix + Video-Wall Processor
• Power adapter DC 12V / 5A
• Rack-mounting ear set
• User Manual
4
SPECIFICATIONS
Technical
Role of usage True 4x4 matrix
HDCP compliance Yes
Video bandwidth Single-link 225MHz [6.75Gbps]
Video support 480i / 480p / 720p 1080i /
1920x1080@60 / 1920x1200@60 30-bit color
Video Format Support HDMI / DVI
Audio support Surround sound (up to 7.1ch) or stereo digital audio
ESD protection Human body model — ±15kV [air-gap discharge]
& ±8kV [contact discharge]
Input 4x HDMI / 1x RS-232 / 1x Ethernet
Output 4x HDMI
Control RS-232 / Ethernet / Front Panel
Input TMDS signal 1.2 Volts [peak-to-peak]
HDMI connector Type A [19-pin female]
RS-232 connector DE-9 [9-pin D-sub female]
RJ-45 connector WE/SS 8P8C
Mechanical
Enclosure Metal case
Dimensions
(L x W x H)
Model 440 x 257 x 44mm [17.3" x 10.1" x 1.7"]
Package 513 x 456 x 144mm [1'7" x 1'5" x 5.6"]
Carton 535 x 320 x 495mm [1'8" x 1' x 1'6"]
Weight Model 2820g [6.2 lbs]
Package 3827g [8.5 lbs]
Fixedness 1U rack-mount with ears and Wall hanging holes
Power supply 12V / 5A DC
Power Consumption 15W
Operation temperature 0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
5
Layout
Front Panel
1. Control Buttons:
Button 1 - Fast switch to 1 x 1
Button 2 - Fast switch to 2 x 2
Button 3 - Fast switch to 1 x 4
Button 4 - Fast switch to 4 x 1
Button 5 - Fast switch to Quad view mode
Button 6 - Lock the device’s function
Button 7 - Reset to default
2. Power Status: Power LED
3. Lock LED: On when user turn on lock function
4. Source LED: The LED will show the selected source
5. Source select push button: Select input button
6. DC jack: Connect to DC 12V/5A power adapter
7. RS-232: RS-232 control port
8. Ethernet: Ethernet control port
9. INPUT 1 - 4: HDMI inputs
10. Out 1 - 4: HDMI outputs
Rear panel
6
Application
7
Software Operation
System Requirement and Precautions
1. Whenever power o 4x4 HDMI Matrix + Video-Wall Processor,
please stay unpowered at least 5 to 10 seconds to allow power
capacitors to discharge.
2. The 4x4 HDMI Matrix + Video-Wall Processor provides software
control program which runs under Microsoft Windows XP, 7, 8,
10 through the interface of RS-232 serial control.
3. Before you click on the icon of the software, make sure you have
secured the connection between your computer COM port and
the 4x4 HDMI Matrix + Video-Wall Processor
Start the software control program
Executing the control software, the following dialog will pop up. It
has two ways to control the 4x4 HDMI Matrix + Video-Wall Processor
device (under Windows 7, please run as administrator).
1. RS-232 Connection: Use RS-232 to connect the port on device
and computer. Select correct COM port and click the OK button.
2. Ethernet Connection: Enter the device IP address and click the
OK button.
8
After the software control setting is accomplished, it will enter
directly to the control interface.
Control Interface
1. Connection Status:
Show the connect information and status. If you use RS-232
control Mode to connect device, the graph is .
For IP control, the graph of Ethernet is .
2. Matrix
You can assign arbitrary video source and switch quad view
mode here. *When you enable the quad view function, the
other matrix function is not available.
9
TV Wall
Step 1: check input channel (video wall source), input resolution
and choose output resolution Firstly, you should select the video
source which you want to use as a video wall function.
The dierent colors of frame represent the dierent output TVs.
The information of coordinate shows the position of output TV.
When setting the dierent resolution, the coordinate of output
will also be changed.
Step 2: Output setting
It has three modes to set up the output TV resolution, position,
size and split screen. The details of dierent mode will be
illustrated in step 2-1, 2-2 and 2-3.
*Note that when you want to change to another mode, you
need to go back to the step 2.
Quick Selection From le Custom dene
10
Step 2-1: quick selection
If you choose the Quick Selection mode in step 2, this window
will automatically pop up. In this mode, you can select default
screen split
Step 2-2:
You can load and read conguration from the existing le on
your PC/laptop.
Tabla de contenidos
Otros manuales de Convertidor de medios de SIIG
SIIG
SIIG AV-GM08X3-S1 Manual de usuario
SIIG
SIIG AV-GM08K3-S1S Manual de usuario
SIIG
SIIG DP USB 3.0 4-Port PCIe i/e VL Manual de usuario
SIIG
SIIG CE-DP0C12-S1 Hoja de información del producto
SIIG
SIIG CE-H24L11-S1 Manual de usuario
SIIG
SIIG AV-GM01Q3-S1DS Manual de usuario
SIIG
SIIG AV-GM01Q3-S1 Manual de usuario
SIIG
SIIG AV-GM08U3-S1 Manual de usuario
SIIG
SIIG RS-232 to Multi-Mode Fiber Optic Manual de usuario
SIIG
SIIG AV-GM0903-S1 Manual de usuario
SIIG
SIIG CE-H21Z11-S1 Manual de usuario
SIIG
SIIG USB 2.0 Video Capture Device Manual de usuario
SIIG
SIIG CE-VG0011-S1 Manual de usuario
SIIG
SIIG CE-H22W11-S1 Hoja de información del producto
SIIG
SIIG ID-UC0011-S1 Manual de usuario
SIIG
SIIG AV-GM08S3-S1 Manual de usuario
SIIG
SIIG ID-SB0011-S1 Manual de usuario
SIIG
SIIG CyberX ID-SC0H11-S1 Manual de usuario
SIIG
SIIG CE-H20511-S1 Manual de usuario
SIIG
SIIG CE-H23G11-S1 Instrucciones de funcionamiento y mantenimiento
