SIIG DP FireWire 800 PCI-32T Manual de usuario
1
DP FireWire 800 PCI-32T
Quick Installation Guide
04-0459D
Introducing the DP FireWire 800 PCI-32T
The DP FireWire 800 PCI-32T provides 2 independent hot-
pluggable FireWire 800 (1394b) ports and 1 FireWire 400
(1394a) port with data transfer rates up to 800Mbps.
FeaturesandBenefits
• Provides 2 FireWire 800 (9-pin) and 1 FireWire 400
(6-pin) ports for multiple device connections
• Supports IEEE 1394b and backwards compatible
with 1394a-2000 and 1394-1995 standards
• Supports serial bus data transfer rates of 100, 200,
400 and 800 Mbps
• Built-in4-pinpowerconnectorprovidesextrapower
when connected to the system power supply
(recommended)
• Hot-swapping allows you to connect/detach
devices without turning your system off
• Includes one spare low profile bracket for systems
with low profile chassis
• Works with DV camcorders, CD-RW/DVD-ROM
drives, scanners, FireWire hard disks, digital
cameras, video game systems and other
audio/video devices
2
System Requirements
• Pentium®or equivalent PC with an available 32-bit
or 64-bit PCI slot
• Windows®7 (32-/64-bit) / Vista (32-/64-bit) / XP
(32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / 2000
PackageContents
• DP FireWire 800 PCI-32T
• Spare low profile bracket
• Driver CD
• Quick installation guide
BoardLayout
Figure1:Layout
FireWire 400 port
FireWire 800 ports
Power Connector
Note: The Power Connector supplies extra
power when connected to the system power
supply. This connection is optional but
recommended.
3
Hardware Installation
Note: For Low Profile systems, replace the currently
mounted bracket with the included Low Profile bracket.
General instructions for installing the card are provided
below. Since the design of computer cases and
motherboards vary, refer to your computer’s reference
manual for further information, if needed.
Static Electricity Discharge may permanently damage
your system. Discharge any static electricity build up in
your body by touching your computer case for a few
seconds. Avoid any contact with internal parts and handle
cards only by their external edges.
1. Turn OFF the power to your computer and any
connected peripheral device.
2. Unplug the computer's power cord, remove the
cover and install the card in an available PCI slot.
3. Push the board down firmly, but gently, until it is
well seated.
4. Connect an available 4-pin power connector from
the system power supply to the 4-pin power
connector on the DP FireWire 800 PCI-32T (see
Figure1onpage2). Thisconnectionisrecommended
for reliable power output.
5. Secure the card and replace the cover.
4
Driver Installation
This section provides information on how to install the DP
FireWire 800 PCI-32T drivers.
Windows7(32-/64-bit)
Windows 7 automatically installs it's built-in FireWire 400
driver for the DP FireWire 800 PCI-32T. To getthe full speed
out of this controller,install the FireWire 800 driver using
the directions below.
1. Insert the driver CD. Click Start.
For 32-bit: In the Search programs and files box,
type D:\setup32.exe, press Enter. (Change D: to
match your CD-ROM drive letter)
For 64-bit: In the Search programs and files box,
type D:\setup64.exe, press Enter. (Change D: to
match your CD-ROM drive letter)
2. Follow the on screen instructions to complete the
installation.
WindowsVista™/Server2008(32-/64-bit)
Windows Vista or Server 2008 automatically installs it's
built-in FireWire 400 driver for the DP FireWire 800 PCI-
32T. To get the full speed out of this controller,install the
FireWire 800 driver using the directions below.
1. Insert the driver CD. Click Start.
For 32-bit: In the Start Search box, type
D:\setup32.exe, press Enter. (Change D: to match
your CD-ROM drive letter)
5
For 64-bit: In the Start Search box, type
D:\setup64.exe, press Enter. (Change D: to match
your CD-ROM drive letter)
2. Follow the on screen instructions to complete the
installation.
WindowsXP/Server2003(32-/64-bit)
Windows XP or Server 2003 automatically installs it's
built-in 1394a driver for the DP FireWire 800 PCI-32T. To
get the full speed out of this controller,install the Firewire
800 driver using the directions below.
1. Insert the driver CD. Click Start, Run.
For 32-bit: Type D:\setup32.exe, clickOK. (Change
D: to match your CD-ROM drive letter)
For 64-bit: Type D:\setup64.exe, clickOK. (Change
D: to match your CD-ROM drive letter)
2. Follow the on screen instructions to complete the
installation.
Windows2000
Windows 2000 automatically installs it's built-in 1394a
driver for the DP FireWire 800 PCI-32T. To get the full
speed out of this controller, install the Firewire 800 driver
using the directions below.
1. Insert the driver CD. Click Start, Run. Type
D:\setup32.exe, click OK. (Change D: to match
your CD-ROM drive letter)
2. Follow the on screen instructions to complete the
installation.
6
ToVerifyWindowsInstallation
1. Check Device Manger to verify installation.
For Windows 7 / XP / Server 2003 / 2000: Right click
Computer or My Computer, click Manage, click
Device Manager.
For Windows Vista: Right click Computer, click
Manage, click Continue, click Device Manager.
For Windows Server 2008: Right click Computer,
click Manage, click Diagnostics, click
Device Manager.
2. Double click 1394 Bus host controllers. Unibrain
driver/OHCI Compatible Board or IEEE 1394b
(FireWire 800) adapter should be displayed.
Connecting Devices
General driver installation steps are provided below.
Please review your device's user manual for more details.
Windows 7 / Vista / Server 2008
Windows 7, Windows Vista, or Server 2008 will
automatically detect and install most FireWire devices
when connected. However, for devices that do not install
automatically, additional drivers maybe required. Refer
to the device's users manual and/or contact the device's
manufacturer for the correct driver.
7
Windows XP
1. At the Found New Hardware Wizard.
For XP w/SP2 or later: Select No, not this time, then
click Next.
For XP w/SP1 or earlier: Go directly to step #2.
2. Select Install the Software Automatically, click
Next.
3. Click Continue Anyway. (Skip if not prompted)
4. Click Finish to complete the installation.
WindowsServer2003
1. At the Found New Hardware Wizard.
For Server 2003 w/SP1 or later: Select No, not this
time, then click Next.
For Server 2003: Go directly to step #2.
2. Select Install the Software Automatically, click
Next.
3. At the Security Alert box click Yes, or the Hardware
Installation box click Continue Anyway, then click
Finish to complete the installation.
Windows2000
1. At the Found New Hardware Wizard, click Next.
2. Select Search for a suitable driver..., then click
Next.
3. Uncheck all check boxes, click Next, click Next.
4. Click Finish to complete the installation.
8
ubSwitch Utility
In order to use a DV camcorder with this controller,
Microsoft's FireWire 400 driver must be installed in the
system. We have supplied an easy to use utility that allows
switching between Microsoft's driver and the FireWire 800
driver. Before using this utility, unplug all devices from the
FireWire 800 card.
The steps, taken from Windows XP, may be different for
other Windows operating systems.
1. Click Start, Programs,Unibrain ubcore, Tools then
ubSwitch.
2. Right click the ubSwitch icon located in the system
tray by the clock.
3. Click the 1394 Adapter that you want to switch,
then click on Microsoft 1394 Drivers.
Note: If your system has multiple 1394 adapters
installed, make sure that you click on the 1394
adapter that the camcorder will be plugged into.
4. Windows will display an information box when the
driver is ready for use. It may take a few seconds
for this box to appear.
Note: To switch back to the FireWire 800 driver,
follow the same procedures, but in step 3 instead of
clicking on Microsoft 1394 Drivers, click on
Unibrain 1394 Drivers.
9
Blank Page
10
Blank Page
Otros manuales para DP FireWire 800 PCI-32T
2
Tabla de contenidos
Otros manuales de Firewire de SIIG
SIIG
SIIG 1 FireWire 800 CardBus DV-Ki Manual de usuario
SIIG
SIIG DP FireWire 800 PCI-32T Manual de usuario
SIIG
SIIG FireWire ExpressCard Manual de usuario
SIIG
SIIG FireWire 3-Port CardBus Manual de usuario
SIIG
SIIG FireWire 2-Port CardBus Manual de usuario
SIIG
SIIG DP FireWire PCIe Manual de usuario
SIIG
SIIG FireWire 800 DV Kit Manual de usuario
SIIG
SIIG FireWire 800 ExpressCard Manual de usuario
SIIG
SIIG 1 FireWire 800 CardBus DV-Ki Manual de usuario
SIIG
SIIG FireWire 800 2-Port ExpressCard/34 Manual de usuario
