Sigma 2-16P Manual de usuario

Laboratory Centrifuge

2-16P

Operating Manual

Please retain for later use!

Operating Manual SIGMA 2-16P page 3 of 75

04/2007

Dear Customer,

Congratulations on your purchase of a SIGMA laboratory centrifuge. You have selected a

device that combines many advantages.

The SIGMA 2-16P is a microprocessor-controlled universal laboratory centrifuge. The

electronic operation control enables a trouble-free use of the centrifuge. With its quiet 3-

phase maintenance-free drive, operation without any carbon dust pollution is guaranteed.

Your device is equipped with user-friendly options that make the operation and standard

settings easier for you. Built-in error-detecting functions keep the user from entering

erroneous values and they also check the entire operation.

All of the settings are executed via the control panel with a coated surface that protects the

device against moisture and dust. In addition, the interior of the centrifuge is also rather easy

to clean. We offer you a device that combines functional variety along with practical

applications.

Our centrifuges are carefully manufactured according to the highest quality standards, in

which we are certain that your demands will always be met.

We wish you much success in the use of the centrifuge.

SIGMA Laborzentrifugen GmbH

An der Unteren Söse 50 Postfach 17 13

D-37520 Osterode D-37507 Osterode

Phone: +49 (0) 5522/5007-0 – Fax: ++49 (0) 5522/5007-12

Internet : www.sigma-zentrifugen.de

E-mail : [email protected]

SIGMA Service Phone: +49 (0) 5522/5007-8425

Fax: +49 (0) 5522/8007-9425

Modifications reserved.

Operating Manual SIGMA 2-16P page 5 of 75

04/2007

Konformitätserklärung

(2006/42/EG; 2006/95/EG; 2004/108/EG)

Declaration of Conformity

(2006/42/EG; 2006/95/EG; 2004/108/EG)

Déclaration de conformité

(2006/42/EG; 2006/95/EG; 2004/108/EG)

Die nachfolgend bezeichnete Maschine wurde in Übereinstimmung mit den Richtlinien

2006/42/EG; 2006/95/EG und 2004/108/EG hergestellt und geprüft.

The following machine is manufactured and tested in compliance with directives 2006/42/EG;

2006/95/EG und 2004/108/EG.

La machine désignée ci-dessous est produit et examiné conforme aux directives 2006/42/EG;

2006/95/EG und 2004/108/EG

Bezeichnung der Maschine: Laborzentrifuge

Machine: Laboratory Centrifuge

Désignation de la machine: Centrifugeuse de laboratoire

Maschinentyp : 2 – 16 P

Type:

Type de la machine:

Bestell Nr. : 10155, 10156, 10157

Part No.:

Réf. usine:

Normen: EN 61010-2-020:2007

Standards: EN 61000-3-2:2006; EN 61000-3-3:1995, A2:2005

Normes : EN 61326-1:2006

Sigma Laborzentrifugen

An der Unteren Söse 50

D-37520 Osterode

23.11.2007

Geschäftsführer

Managing Director

Directeur Gérant

........................................................................

Fabr. Nr. Serial No. Numéro de série

2-16 P 20071123.DOC

Operating Manual SIGMA 2-16P page 7 of 75

04/2007

Table of Contents

1General Information 11

1.1 Importance of the Operating Manual 11

1.2 Intended Use 11

1.3 Technical Data 13

1.3.1 Ambient Temperature 13

1.4 Scope of Supply 15

1.5 Standards and Regulations 15

2Safety Instructions and Hazard Warnings 16

2.1 Symbols used in the Safety Instructions 16

2.2 Symbols used in the Operating Manual 17

2.3 Informal Notes on Safety 17

2.4 Safety Instructions for Centrifugation 18

2.4.1 Special Instructions 18

2.4.2 Resistance of Plastics 19

2.5 Prohibited Centrifuging Operations and Hazard Warnings 19

2.5.1 Special Hazards 20

2.6 Checks by the Operator 21

2.7 Instructions for Emergency Situations 21

2.8 Remaining Hazards 21

3Transport and Storage 22

3.1 Dimensions and Weight 22

3.2 Notes on Transport 22

3.3 Notes on Storage 22

4Set-up and Connection 23

4.1 Unpacking the Centrifuge 23

4.1.1 Transport Safety Device 23

4.2 Installation 24

4.2.1 Installation Site 24

4.2.2 Connection 24

4.2.3 Fuses/Emergency Circuit Breaker on Site 24

Operating Manual SIGMA 2-16P page 8 of 75

04/2007

5Using the Centrifuge 25

5.1 Description 25

5.1.1 Operating Elements 25

5.1.2 Operating Panel 26

5.1.2.1 Name Plate 26

5.1.3 Construction and Constructive Safety Measures 27

5.1.4 Drive 27

5.1.5 Operation and Display 27

5.1.6 Electronic System 27

5.1.7 Safety Devices 28

5.1.7.1 Lid Lock and Lid Closing Device 28

5.1.7.2 Standstill Monitoring 28

5.1.7.3 System Check 28

5.1.7.4 Ground Wire Check 28

5.1.7.5 Imbalance Monitoring System 28

5.2 Initial Start-Up 29

5.2.1 Switching the Centrifuge ON 29

5.2.2 Opening and Closing the Lid 29

5.2.3 Installation of Rotors 30

5.2.3.1 Installation of Angle Rotors with a Hermetically Sealed Lid 31

5.2.3.2 Installation of the Microhematocrite Rotor 32

5.2.4 Installation of Accessories 33

5.2.4.1 Carrier Systems 34

5.2.4.2 Tubes 34

5.2.5 Service Life of Rotors and Accessories 34

5.2.6 Starting the Centrifuge 35

5.2.7 Interrupting a Centrifugation Run 35

5.2.7.1 Interrupting a Deceleration Process 35

5.2.7.2 Softstart and Softstop Function 35

5.3 Display / Program Options 36

5.3.1 Time 36

5.3.1.1 Changing the Time Increments 37

5.3.1.2 Short Run 37

5.3.1.3 Continuous Run 37

5.3.2 Speed 38

5.3.2.1 Changing the Speed Increments 38

Operating Manual SIGMA 2-16P page 9 of 75

04/2007

5.3.3 Relative Centrifugal Force (RCF) 39

5.3.3.1 Changing the RCF Increments 39

5.3.4 Rotor Preselection 40

5.3.5 Program 41

5.3.5.1 Saving the Current Settings 41

5.3.5.2 Calling Up Stored Programs 41

5.3.6 Lockdown 42

5.3.6.1 Permanent Lockdown 42

5.3.7 Activating/Deactivating the Automatic Lid Opening Function 43

5.3.8 Activating/Deactivating the Sound Signal 43

6Malfunctions and Error Correction 44

6.1 Error Mode 44

6.2 Error Correction 44

6.2.1 No Indication on the Display 44

6.2.2 Centrifuge cannot be started 44

6.2.3 Centrifuge decelerates during Operation 44

6.2.4 Lid cannot be opened 45

6.2.5 Emergency Lid Release 45

6.2.6 Error Codes 46

6.2.7 Service Contact 46

7Care and Maintenance 47

7.1 Cleaning and Care 47

7.1.1 Centrifuge 47

7.1.2 Accessories 48

7.1.2.1 Plastic Accessories 48

7.1.2.2 Aluminum Accessories 48

7.1.3 Rotor, Buckets, and Multiple Carriers 49

7.1.3.1 Microhematocrite Rotor 49

7.1.4 Load-bearing Bolts 50

7.1.5 Glass Breakage 50

7.2 Sterilization and Disinfection of the Rotor Chamber and Accessories 51

7.2.1 Autoclaving 52

8Disposal 53

8.1 Disposal of the Centrifuge 53

8.2 Disposal of the Packaging 53

Operating Manual SIGMA 2-16P page 10 of 75

04/2007

9Warranty and Liability 53

10 Suitable Accessories 54

10.1 Graphical Representation of the Rotors 61

11 Appendix 62

11.1 Formulae – Mathematical Relations 62

11.1.1 Relative Centrifugal Force (RCF) 62

11.1.2 Density 62

11.1.3 Speed-Gravitational-Field-Diagram 62

11.2 Declaration of Decontamination/Return Declaration 64

11.3 Resistance Data 69

12 Index 73

Otros manuales para 2-16P

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Equipo de laboratorio de Sigma

Sigma

Sigma 2-7 Manual de usuario

Sigma

Sigma 3-18KS Manual de usuario

Sigma

Sigma 4-16KS Manual de usuario

Sigma

Sigma 6-16KS Manual de usuario

Sigma

Sigma Spectrum 35700ABB Manual de usuario

Sigma

Sigma SGP-1000-2 Manual de usuario

Sigma

Sigma 2-16KC Manual de usuario

Sigma

Sigma 8KBS Manual de usuario

Sigma

Sigma 2-16P Manual de usuario

Sigma

Sigma 3-18KHS Manual de usuario

Sigma

Sigma 3-16K Manual de usuario

Sigma

Sigma 1-6P Manual de usuario

Sigma

Sigma 4-16KS Manual de usuario

Sigma

Sigma 4-15C Manual de usuario

Sigma

Sigma 3-16P Manual de usuario

Sigma

Sigma 8KS Manual de usuario

Sigma

Sigma 6-16KHS Manual de usuario

Sigma

Sigma 10164 Manual de usuario

Sigma

Sigma 1-7 Manual de usuario

Sigma

Sigma 4-5L Manual de usuario

Sigma

Sigma 1-16K IVD Manual de usuario

Sigma

Sigma 1-14K Manual de usuario

Sigma

Sigma 1-15PK Manual de usuario

Sigma

Sigma spectrum Manual de usuario

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario