SIGLENT TECHNOLOGIES SDG1000 Series Manual de usuario

Service Manual

SDG1000 Series

Function/Arbitrary Waveform Generator

2014 SIGLENT TECHNOLOGIES CO., LTD

SM02010-E01B

SDG1000 Service Manual I

Guaranty and Declaration

Trademark Information

SIGLENT is the registered trademark of SIGLENT TECHNOLOGIES CO., LTD

Declaration

 SIGLENT products are protected by patent law in and outside of P.R.C.

 SIGLENT reserves the right to modify or change parts of or all the

specifications or pricing policies at company’s sole decision.

 Information in this publication replaces all previously corresponding

material.

 Any way of copying, extracting or translating the contents of this manual is

not allowed without the permission of SIGLENT.

 SIGLENT will not be responsible for losses caused by either incidental or

consequential in connection with the furnishing, use or performance of this

manual as well as any information contained.

Product Certification

SIGLENT guarantees this product conforms to the national and industrial

standards in china as well as the ISO9001: 2008 standard and the ISO14001:

2004 standard. Other international standard conformance certification is in

progress.

II SDG1000 Service Manual

General Safety Summary

Carefully read the following safety precautions to avoid person injury and

prevent damage to the instrument or any products connected to it. To avoid

potential hazards, please use the instrument as specified.

Only qualified technician should perform service procedures

Use Proper Power Line

Use only the special power line of the instrument that approved by local state.

Ground the Instrument

The instrument grounds through the protective terra conductor of the power

line. To avoid electric shock, the ground conductor must be connected to the

earth. Make sure the instrument is grounded correctly before connect its input

or output terminals.

Connect the Signal Wire correctly

The potential of the signal wire is equal to the earth, so do not connect the

signal wire to a high voltage. Do not touch the exposed contacts or

components.

Look Over All Terminals’ Ratings

To avoid fire or electric shock, please look over all ratings and sign instruction

of the instrument. Before connecting the instrument, please read the manual

carefully to gain more information about the ratings.

Not Operate with Suspected Failures

If you suspect that there is a damage of the instrument, please let a qualified

service personnel check it.

Avoid Circuit or Components Exposed

Do not touch exposed contacts or components when the power is on.

Do not Operate in Wet/Damp Conditions

Do not Operate in an Explosive Atmosphere

Keep the Surface of the Instrument Clean and Dry

SDG1000 Service Manual III

Safety Terms and Symbols

Terms used on the instrument. Terms may appear on the instrument:

DANGER: Indicates an injury or hazard that may immediately happen.

WARNING: Indicates an injury or hazard that may not immediately happen.

CAUTION: Indicates a potential damage to the instrument or other property

that might occur.

Symbols used on the instrument. Symbols may appear on the instrument:

Hazardous Protective Warning Earth Ground Power

Voltage Earth Ground Switch

IV SDG1000 Service Manual

Overview for the Document

The document is for SDG1000 series arbitrary waveform generator, which will

be mostly written as generator for short in the following text. The main contents

described in this manual are:

SDG1000 Series Generator at a glance

This part introduces the main technology characteristics for SDG1000

generator.

The Front Panel at a glance

This part introduces briefly all the buttons and the knob on the front panel.

The Rear Panel at a glance

This part introduces all the ports for easy communication on the rear panel.

Specifications

Chapter 1 lists the generator’s specifications.

Quick Start

Chapter 2 prepares the generator for use and helps you get familiar with a few

of its front-panel features.

Calibration

Chapter 3 provides calibration, verification and adjustment procedures for the

generator.

Assembly Procedures

Chapter 4 provides disassembly procedures for you to get an understanding of

the structure of the generator, thus to install or replace some needed modules,

or troubleshoot faults you encounter while operating it.

Troubleshooting

Chapter 5 provides troubleshooting procedures for the internal main board and

power supply board, as well as the quick guide for general troubles. Before any

operation, you should read the ESD Precautions to avoid personal injuries or

damages to the generator

Maintainance

Chapter 6 provides information on maintenance, daily care and unpacking

inspection of the instrument. The contact information is attached in the end in

case of some unsolvable troubles you encounter.

SDG1000 Service Manual V

Convention for the whole Contents

All the description for function and performance in this document are according

to SDG1050 series generator, and apply to generator of the other types. The

SDS1000 series contains the following types:

Type Analog Bandwith Channel

SDG1005 5 MHz 2

SDG1010 10 MHz 2

SDG1020 20 MHz 2

SDG1025 25 MHz 2

SDG1050 50 MHz 2

VI SDG1000 Service Manual

SDG1000 Series at a Glance

The SDG1000 series is a direct digital synthesized waveform generator with

built-in arbitrary waveform and pulse capabilities. Its combination of excellent

system features, easiness in usage and versatile functions makes this

generator a perfect solution for your testing now and in the future.

Characteristics

 DDS technology provides precise, stable and low distortional output signal.

 3.5’TFT color LCD display.

 125MSa/s sampling rate, 14-bit resolution.

 Frequency characteristics:

Sine: 1μHz to 50 MHz

Square: 1μHz to 25 MHz

Ramp: 1μHz to 300 kHz

Pulse: 500μHz to 10MHz

White Noise: 50MHz bandwidth (-3dB)

Arbitrary: 1μHz to 5MHz

 5 standard waveforms: Sine, Square, Ramp, Pulse, Noise

 Self-defined arbitrary waveform

 Multiple modulation function, various modulated waveform: AM, DSB-AM,

FM, PM, ASK, FSK, Sweep and Burst.

 Multiple I/O: external modulation source, external 10 MHz reference input,

external trigger source, waveform output, synchronous signal output.

 Support USB storage device. Software updating could also be performed

using USB devices.

 Up to 16k sample points of internal waveform depth, which can rebuild or

simulate any complex waveform.

 Remote control is realized using the USB cable.

 Multiple interfaces: USB host & device

 Support the seamless connection with SIGLENT Series Digital

Oscilloscopes; Be able to directly read and rebuild the stored waveform in

the oscilloscopes.

 2 languages（English and Chinese）user interface and built-in help system.

Note: All the specifications described in this manual are according to

SDG1050.

SDG1000 Service Manual VII

The Front Panel at a Glance

No. Description No. Description

1 ON/OFF Switch 8 Direction Keys

2 USB Host 9 Output Control Keys

3 LOGO 10 BNC Connectors

4 Model 11 Function Keys

5 Menu ON/OFF Switch 12 Waveform Selection Keys

6 Digital Keypad 13 Menu Operation Keys

7 Universal Knob 14 LCD Display

14 13 12 11 10

3 4 5 6 7

VIII SDG1000 Service Manual

The Front Panel Display at a Glance

Output Status

Parameter

Name

Softkey

Parameter Unit

Value

Mod Information

Trigger Information

Channel Display Space

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Generador portátil de SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SDG7000A Series Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES UM0202X-E02D Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SDG6000X Series Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SDG1032X Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SDG800 Series Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SDG7000A Series Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SSG5000X Series Instrucciones de funcionamiento

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SDG1062X Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SDG7000A Series Manual de usuario

SIGLENT TECHNOLOGIES

SIGLENT TECHNOLOGIES SDG1000X Series Manual de usuario

Manuales populares de Generador portátil de otras marcas

Kohler

Kohler 20EORZ Manual de instrucciones

Powerhorse

Powerhorse 83171 Manual de usuario

HURST

HURST ML-630-SI Manual de usuario

ETQ

ETQ TG4000 Manual de usuario

Briggs & Stratton

Briggs & Stratton 40265 Guía de configuración

ConMed

ConMed 7550 Manual de usuario

Owon

Owon Waveform Generator Manual de usuario

evertz

evertz 7700 Series Manual de usuario

Power Stroke

Power Stroke PS906025 Manual de usuario

Firefly

Firefly Cygnus CYG2400/460/24 Manual de usuario

Draper

Draper PG950S Actualización de firmware

PowerBoss

PowerBoss PowerBoss Manual de usuario

SDMO

SDMO SH 4000 Manual de usuario

EINHELL

EINHELL STE 5500 Manual de usuario

Wanco

Wanco WI3000P Manual de usuario

Full Boar

Full Boar FBT-3300 Manual de usuario

Dwyer Instruments

Dwyer Instruments ASG Manual de usuario

Westinghouse

Westinghouse WH1000i Series Manual de usuario