SIGLENT TECHNOLOGIES SAP1000 Manual de usuario

SAP1000

Active Probe

User Manual

UM60010-E01A

SAP1000 Active Probe User Manual

2 / 19 WWW.S IGLENT.COM

Contents

CONTENTS............................................................................................................................................................................ 2

1INTRODUCTION ................................................................................................................................................... 3

2GENERAL SAFETY SUMMARY....................................................................................................................... 4

2.1 SAFETY TERMS AND SYMBOLS........................................................................................................................... 4

2.2 WORKING ENVIRONMENT................................................................................................................................... 5

2.3 CALIBRATION...................................................................................................................................................... 6

2.4 CLEANING ........................................................................................................................................................... 6

2.5 ABNORMAL CONDITIONS.................................................................................................................................... 6

3FIRST STEPS........................................................................................................................................................... 8

3.1 DELIVERY CHECKLIST ........................................................................................................................................ 8

3.2 FUNCTIONAL CHECK........................................................................................................................................... 8

3.3 QUALITY ASSURANCE ........................................................................................................................................ 9

3.4 MAINTENANCE AGREEMENT ............................................................................................................................10

4INTRODUCTION .................................................................................................................................................11

5STANDARD ACCESSORIES.............................................................................................................................12

6PROBE OPERATION..........................................................................................................................................16

6.1 CONNECTING THE PROBE TO AN OSCILLOSCOPE..............................................................................................16

6.2 CONNECTING THE PROBE TO THE TEST CIRCUIT ..............................................................................................17

7CONTACT SIGLENT ..........................................................................................................................................18

SAP1000 Active Probe User Manual

3 / 19 WWW.S IGLENT.COM

1Introduction

This user manual includes important safety information related to the SAP1000

active probe and simple tutorials for basic operation of the probe.

SAP1000 Active Probe User Manual

4 / 19 WWW.S IGLENT.COM

2General Safety Summary

This chapter contains information and warnings that must be followed to keep

the probe operating under the appropriate safety conditions. In addition to the

safety precautions specified in this section, you must also follow recognized

safety procedures.

Connect and disconnect properly. Connect probe to the measurement

instrument before connecting the test leads to a circuit/signal being tested.

Use indoors only.

Keep product surfaces clean and dry.

Use only within operational environment listed. Do not use in wet or

explosive environments.

Be careful with sharp tips. The tips may cause bodily injury if not handled

properly.

Connect the signal wire correctly. The potential of the signal wire

ground is equal to the earth; therefore, do not connect the signal wire to a

high voltage. Do not touch the exposed contacts or components.

Only qualified technical personnel should service this instrument.

Do not operate with suspected failures. Do not use the probe if any part

is damaged. Cease operation immediately and remove the probe from

use.

2.1 Safety Terms and Symbols

This symbol may appear on the probe body or in this manual to alert you to

SAP1000 Active Probe User Manual

5 / 19 WWW.S IGLENT.COM

important safety considerations.

CAUTION：Potential for damage to probe or instrument it is connected

to. Attend to the accompanying information to protect against personal

injury or damage. Do not proceed until conditions are fully understood

and met.

2.2 Working Environment

The accessory is intended for indoor use and should be operated in a clean,

dry environment. Before using this product, ensure that its operating

environment is maintained within these parameters:

Temperature: 5 to 40°C.

Humidity: Maximum relative humidity 80% for temperatures up to 30 °C

decreasing linearly to 50% relative humidity at 40°C.

Altitude: Up to 10,000 ft (3,048 m).

Note:Direct sunlight, radiators, and other heat sources should be taken into

account when assessing the ambient temperature.

WARNING: Do not operate the probe in an explosive atmosphere or wet

and damp conditions.

CAUTION: Do not exceed the specified input maximum voltage levels.

Refer to Specifications for more details.

SAP1000 Active Probe User Manual

6 / 19 WWW.S IGLENT.COM

2.3 Calibration

The recommended calibration interval is one year. Calibration should be only

performed by qualified personnel.

2.4 Cleaning

The exterior of the probe and cable should be cleaned, using a soft cloth

moistened with water. The use of abrasive agents, strong detergents, or other

solvents may damage the probe. Always ensure that the input leads are free of

debris. To avoid electrical shock, unplug the probe from the scope before

cleaning.

No operator serviceable parts inside. Do not remove covers.

Refer servicing to qualified personnel

2.5 Abnormal Conditions

Only operate the probe for the purposes specified by the manufacturer.

Do not operate the probe if there is any visible sign of damage or if it has been

subjected to severe transport stresses.

If you suspect the probe has been impaired, disconnect the probe from the

scope and secure the probe against any unintended operation.

SAP1000 Active Probe User Manual

7 / 19 WWW.S IGLENT.COM

Proper use of the probe depends on careful reading of all instruction and

labels.

Warning: Any use of the probe in a manner not specified by the

manufacturer may impair the probe. This probe should not be directly

connected to human subjects or used for patient monitoring.

SAP1000 Active Probe User Manual

8 / 19 WWW.S IGLENT.COM

3First steps

3.1 Delivery Checklist

First, verify that all items listed on the packing list have been delivered. If you

note any omissions or damage, please contact your nearest SIGLENT

customer service center or distributor as soon as possible. If you fail to contact

us immediately in case of omission or damage, we will not be responsible for

replacement.

3.2 Functional Check

The functional check verifies the basic functional of the probe functions.

1. Turn the oscilloscope on and allow at least 30 minutes warm-up time

before functional check.

SAP1000 Active Probe User Manual

9 / 19 WWW.S IGLENT.COM

2. Connect the SAP1000 probe to channel 1 of the oscilloscope.

3. Touch Probe in the C1 menu, and then check the information of the probe,

including the probe type, probe SN, bandwidth, resistance, capacitance

and attenuation.

4. Set the vertical scale of channel 1 to 2 V/div.

5. Set the offset of channel 1 to zero.

6. Measure the average voltage of channel 1.The measurement should be

within ±(1.5% * full screen reading + 10 mV).

7. Set the vertical scale of channel 1 to1 V/div, 500 mV/div, 200 mV/div, 100

mV/div, 50 mV/div, 20 mV/div, 10 mV/div, and repeat step 6.

3.3 Quality Assurance

The probe has a 3-year warranty (1-year warranty for probe attachments) from

the date of shipment, during normal use and operation. SIGLENT can repair or

replace any product that is returned to the authorized service center during the

warranty period. We must first examine the product to make sure that the

SAP1000 Active Probe User Manual

10 / 19 WWW.SIGLENT.COM

defect is caused by the process or material, not by abuse, negligence, accident,

abnormal conditions or operation.

SIGLENT shall not be responsible for any defect, damage, or failure caused by

any of the following:

a) Attempted repairs or installations by personnel other than SIGLENT.

b) Connection to incompatible devices/incorrect connection.

c) For any damage or malfunction caused by the use of non-SIGLENT

probe power supplies.

3.4 Maintenance Agreement

SIGLENT provides various services on the basis of maintenance agreements.

We offer extended warranties as well as installation, training, enhancement

and on-site maintenance and other services through specialized

supplementary support agreements. For details, please consult your local

SIGLENT customer service center or distributor.

Otros manuales para SAP1000

Tabla de contenidos

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario