Sigenergy SigenStor Checkwatt CM10 Manual de usuario
1/17
SigenStor Home Install with
Checkwatt CM10 Guide
Release date: 2023-12-08
For Aprilice Installers
Three-phase System
A1
2/17
Copyright Notice
Copyright© 2023 Sigenergy Technology Co., Ltd. All Rights Reserved.
Description in this document may contain predictive statements regarding
financial and operating results, product portfolio, new technology,
configurations and features of product. Several factors could cause difference
between actual results and those expressed or implied in the predictive
statements. Therefore, description in this document is provided for reference
purpose only and constitutes neither an offer nor an acceptance. Sigenergy
Technology Co., Ltd. may change the information at any time without notice.
and other Sigenergy trademarks are owned by
Sigenergy Technology Co., Ltd.
All trademarks and registered trademarks in this document belong to their
owners.
www.sigenergy.com
3/17
Contents
Overview..............................................................................................................................................4
Chapter 1 Safety Precautions......................................................................................................... 5
Chapter 2 Introduction to energy storage system....................................................................8
2.1 Appearance Introduction.........................................................................................................8
2.1.1 Appearance and Dimensions............................................................................................. 8
2.1.2 Port Introduction....................................................................................................................9
Chapter 3 Equipment Installation and Wiring......................................................................... 10
Chapter 4 System Operation........................................................................................................15
4.1 mySigen App Download.........................................................................................................15
4.2 mySigen App Setting for Modbus Control......................................................................... 15
4/17
User Manual
Overview
Introduction
This document mainly introduces the product introduction, networking, system
operation and maintenance of the devices in the SigenStor Home Three-phase
system.
Readers
This document is suitable for product users and professionals
Sign Definition
The following signs may be used in the document to indicate security
precautions or key information. Before installation and operation, familiarize
yourself with signs and their definitions.
Signs
Definition
Danger. Failure to comply may result in death or serious
personal injury.
Danger. Failure to comply may result in serious personal
injury or property damage.
Caution. Failure to comply may result in property damage.
Important or key information, and supplementary
operation tips.
5/17
User Manual
Chapter 1 Safety Precautions
Basic Information
Before installing, operating, and maintaining the equipment, familiarize yourself
with this document.
The "Danger ", "Warning", "Caution" items described in this manual are only
supplementary to all precautions.
The Company shall not be liable for equipment damage or property loss caused
by the following reasons:
Failure to obtain approval from the national, regional power authority.
The installation environment does not meet international, national, or regional
standards.
Failure to observe local laws, regulations and norms when operating and
maintaining equipment.
The installation area does not meet the requirements of the equipment.
Failure to follow the instructions and precautions in this document.
Failure to follow the warning labels on equipment or tools.
Negligent, improper operation or intentional damage.
Battery capacity loss or irreversible damage caused by your failure to charge
the device in time.
Damage caused by your or a third party's replacement of our equipment
(such as mixing our battery pack with other batteries, using our battery
pack with other brands of inverters or converters, etc.).
The equipment is damaged by your or the third-party company to use the
accessories supplied with the package and purchase and use the
accessories of the same specifications for installation.
Equipment damage caused by improper operations such as disassembling,
replacing, or modifying the software code without authorization.
Equipment damage caused by force majeure (such as war, earthquake, fire,
6/17
User Manual
storm, lightning, flood, debris flow, etc.).
Damage caused by the failure of the natural environment or external power
parameters to meet the standard requirements of the equipment during
actual operation (for example, the actual operating temperature of the
equipment is too high or too low).
The equipment was stolen.
The equipment is damaged after the warranty period.
Safety Requirements
An overheated battery pack may cause fire or explosion. Do not expose the
device to high temperature or heat sources (such as fire, or heaters)
around the equipment for a long time.
Do not clean or soak the equipment with water, alcohol, or oil to avoid power
leakage or battery pack leakage.
Do not tipover or cause impact to the equipment. In case of an accident,
please stop using the equipment immediately and contact your installer,
The equipment shall be inspected and evaluated by professional
personnel before continuing to use.
Do not touch the heat sink when the equipment is operating.
When the equipment is operating, do not cover the decorative cover plate
and keep the heat dissipation channel of 300–600 mm to avoid fire at high
temperature.
7/17
User Manual
Do not use the equipment if it has any defects. If the equipment appears
abnormal (for example, battery pack leakage or appearance distortion),
contact your installer.
Carbon dioxide fire extinguishers and ABC dry powder fire extinguishers are
recommended at home.
If the equipment cannot be charged, please contact your installer in time.
Do not use the equipment in the following situations:
When connected to public infrastructure systems.
When connected to emergency medical equipment.
When connected to elevators and other control devices.
Any other critical systems.
8/17
User Manual
Chapter 2 Introduction to energy
storage system
2.1 Appearance Introduction
2.1.1 Appearance and Dimensions
Inverter and Battery Pack
9/17
User Manual
2.1.2 Port Introduction
SigenStor EC/ SigenStor AC/Sigen Hybrid Left View
S/N
Name
Marking
1
Decorative cover light strip connector
LED
2
Network interface
RJ45 1/ RJ45 2
3
DC input interface
PV1+/PV2+/ PV3+/PV4+/
PV1-/PV2- /PV3-/PV4-
4
AC output interface
AC
5
Communication interface
COM
6
Ground screw
-
7
Switch button
ON/OFF
8
DC switch
DC SWITCH
9
Sigen CommMod interface
4G
10
Antenna interface
ANT
10 /17
User Manual
Chapter 3 Equipment Installation
and Wiring
Only company authorized personnel should install and connect the equipment.
For details, see SigenStor Home Installation Guide - Three-phase System A1.
Below is the networking figure for Modbus RTU mode with Checkwatt CM10
device using RS485.
The RS485 cable from SigenStor，has three wires, among which RS485A1 should
be connected to the + port of the Checkwatt device, RS485B1 should be
connected to the - port of the Checkwatt device and the PE line should be
connected to the GND port.
Please also refer to the wiring detail figure on page 14.
Tabla de contenidos
Otros manuales de Almacenamiento de Sigenergy
Manuales populares de Almacenamiento de otras marcas
Spectra Logic
Spectra Logic T-Series Spectra T50e Manual de usuario
Panasonic
Panasonic LKM-F931-1 Manual de usuario
Tabernus
Tabernus Enterprise Erase E2400 Manual de usuario
Rocstor
Rocstor COMMANDER 3F series Manual de usuario
HP
HP P9000 Manual de usuario
Western Digital
Western Digital Ultrastar Data60 Manual de usuario