Siemens SIMATIC S7-1500R/H Documento técnico

EQUIPMENT MANUAL

Edition

CPU 1517H-3 PN

S7-1500R/H

support.industry.siemens.com

6ES7517-3HP00-0AB0

11/2022

SIMATIC

Introduction 1

Safety instructions 2

Product overview 3

Connecting 4

Interrupts, diagnostics, error

messages and system events 5

Technical specifications 6

Dimension drawing A

SIMATIC

S7-1500R/H

CPU1517H-3PN

(6ES7517-3HP00-0AB0)

Equipment Manual

11/2022

A5E42011886-AD

Siemens AG

Digital Industries

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E42011886-AD

Ⓟ 10/2022 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended or

approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of SiemensAG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

1 Introduction........................................................................................................................................ 5

1.1 S7-1500R/H Documentation Guide.................................................................................... 6

1.1.1 Information classes S7-1500R/H........................................................................................ 6

1.1.2 SIMATIC Technical Documentation.................................................................................... 7

2 Safety instructions.............................................................................................................................. 9

2.1 Security information......................................................................................................... 9

3 Product overview................................................................................................................................ 10

3.1 New functions.................................................................................................................. 10

3.2 Configuration and operating principle............................................................................... 14

3.3 Hardware properties......................................................................................................... 15

3.4 Firmware functions........................................................................................................... 18

3.5 Operator controls and display elements............................................................................. 20

3.5.1 Front view of the CPU with closed front flap...................................................................... 20

3.5.2 Front view of the CPU without front flaps.......................................................................... 22

3.5.3 Rear view of the CPU......................................................................................................... 23

3.5.4 Bottom view..................................................................................................................... 24

3.6 Mode selector................................................................................................................... 24

4 Connecting......................................................................................................................................... 26

4.1 Terminal assignment........................................................................................................ 26

5 Interrupts, diagnostics, error messages and system events.............................................................. 30

5.1 Status and error display of the CPU.................................................................................... 30

6 Technical specifications...................................................................................................................... 35

A Dimension drawing............................................................................................................................ 44

CPU1517H-3PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2022, A5E42011886-AD

Table of contents

Introduction 1

Purpose of the documentation

This manual supplements the system manual of the S7-1500R/H redundant system and the

function manuals. This manual contains a description of the module-specific information. The

system-related functions are described in the system manual. All system-spanning functions

are described in the function manuals.

The information provided in this manual and the system manual enables you to commission

the CPU1517H-3PN.

Conventions

STEP7: In this documentation, "STEP7" is used as a synonym for all versions of the

configuration and programming software "STEP7 (TIA Portal)".

Please also observe notes marked as follows:

NOTE

A note contains important information on the product described in the documentation, on

the handling of the product or on the section of the documentation to which particular

attention should be paid.

Recycling and disposal

For environmentally friendly recycling and disposal of your old equipment, contact a certified

electronic waste disposal company and dispose of the equipment according to the applicable

regulations in your country.

Industry Mall

The Industry Mall is the catalog and order system of Siemens AG for automation and drive

solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power

(TIP).

You can find catalogs for all automation and drive products on theInternet

(https://mall.industry.siemens.com).

CPU1517H-3PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2022, A5E42011886-AD

1.1 S7-1500R/H Documentation Guide

1.1.1 Information classes S7-1500R/H

The documentation for the redundant S7-1500R/H system is arranged into three areas.

This arrangement enables you to access the specific content you require.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742691).

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the redundant S7-1500R/H system.

The STEP7 online help supports you in the configuration and programming.

Examples:

•Getting Started S7-1500R/H

•System manual S7-1500R/H

•Online help TIA Portal

Device information

Equipment manuals contain a compact description of the module-specific information, such

as properties, wiring diagrams, characteristics and technical specifications.

Examples:

•Equipment Manuals CPUs

•Equipment Manuals Power Supply Modules

General information

The function manuals contain detailed descriptions on general topics relating to the

redundant S7-1500R/H system.

Examples:

•Function Manual Diagnostics

•Function Manual Communication

•Function manual Structure and Use of the CPU Memory

•Function Manual Cycle and Response Times

•PROFINET Function Manual

Product Information

Changes and supplements to the manuals are documented in a Product Information. The

Product Information takes precedence over the device and system manuals.

You can find the latest Product Information on the redundant S7-1500R/H system on the

Internet. (https://support.industry.siemens.com/cs/ww/en/view/109742691)

6CPU1517H-3PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2022, A5E42011886-AD

Introduction

1.1 S7-1500R/H Documentation Guide

Manual Collection S7-1500/ET200MP

The Manual Collection S7-1500/ET200MP contains the complete documentation on the

redundant S7-1500R/H system gathered together in one file.

You can find the Manual Collection on the Internet.

(https://support.industry.siemens.com/cs/ww/en/view/86140384)

SIMATICS7-1500 comparison list for programming languages

The comparison list contains an overview of which instructions and functions you can use for

which controller families.

You can find the comparison list on the Internet.

(https://support.industry.siemens.com/cs/ww/en/view/86630375)

1.1.2 SIMATIC Technical Documentation

Additional SIMATIC documents will complete your information. You can find these

documents and their use at the following links and QR codes.

The Industry Online Support gives you the option to get information on all topics. Application

examples support you in solving your automation tasks.

Overview of the SIMATIC Technical Documentation

Here you will find an overview of the SIMATIC documentation available in Siemens Industry

Online Support:

Industry Online Support International

(https://support.industry.siemens.com/cs/ww/en/view/109742705)

Watch this short video to find out where you can find the overview directly in Siemens

Industry Online Support and how to use Siemens Industry Online Support on your mobile

device:

Quick introduction to the technical documentation of automation products per

video (https://support.industry.siemens.com/cs/us/en/view/109780491)

YouTube video: Siemens Automation Products - Technical Documentation at a

Glance (https://youtu.be/TwLSxxRQQsA)

mySupport

With "mySupport" you can get the most out of your Industry Online Support.

Registration You must register once to use the full functionality of "mySupport". After registra

tion, you can create filters, favorites and tabs in your personal workspace.

Introduction

1.1 S7-1500R/H Documentation Guide

CPU1517H-3PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2022, A5E42011886-AD

Support requests Your data is already filled out in support requests, and you can get an overview of

your current requests at any time.

Documentation In the Documentation area you can build your personal library.

Favorites You can use the "Add to mySupport favorites" to flag especially interesting or fre

quently needed content. Under "Favorites", you will find a list of your flagged

entries.

Recently viewed

articles

The most recently viewed pages in mySupport are available under "Recently viewed

articles".

CAx data The CAx data area gives you access to the latest product data for your CAx or CAe

system. You configure your own download package with a few clicks:

• Product images, 2D dimension drawings, 3D models, internal circuit diagrams,

EPLAN macro files

• Manuals, characteristics, operating manuals, certificates

• Product master data

You can find "mySupport" on the Internet. (https://support.industry.siemens.com/My/ww/en)

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You can find the application examples on the Internet.

(https://support.industry.siemens.com/cs/ww/en/ps/ae)

8CPU1517H-3PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2022, A5E42011886-AD

Introduction

1.1 S7-1500R/H Documentation Guide

Safety instructions 2

2.1 Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation)

are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure to

cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/cert).

CPU1517H-3PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2022, A5E42011886-AD

CPU1517H-3PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2022, A5E42011886-AD

Product overview 3

3.1 New functions

This section contains an overview of the most important new firmware functions of the CPU

compared with the predecessor version CPU (V2.9).

New functions of the CPU in firmware version V3.0

New functions Customer benefits Where can I find informa

tion?

Support

PROFINET system redundancy R1

As of FW version V3.0, the S7-1500H redund

ant system supports PROFINET system redund

ancy R1:

• ET 200SP IM 155-6 PN R1

(6ES7155-6AU00-0HM0)

• ET 200SP HA IM 155-6 PN HA

(6DL1155-6AU00-0PM0)

• ET 200iSP IM 152-1 PN

(6ES7152-1BA00-0AB0)

R1 devices are equipped with two interface

modules compared to S2 devices. If one inter

face module fails, the R1 device can still be

reached by the H-CPUs via the second inter

face module. Thus, R1 devices have a higher

availability than S2 devices.

• S7-1500R/H System Manual

(https://support.industry.

siemens.

com/cs/ww/en/view/10975

4833)

• PROFINET Function Manual

(http://support.automation.

siemens.

com/WW/view/en/4994885

New configuration variants for S7-1500H As of FW version V3.0, the S7-1500H redund

ant system supports additional configuration

variants:

• Configuration of PROFINET rings with R1

devices

• Configuration of a line topology with S2

devices, switched S1 devices

• Configuration of a line topology with R1

devices

• Configuration of a combined topology with

R1 devices, S2 devices

• Configuration without additional devices

This allows you to connect the S7-1500H

redundant system to almost any network

topology and solve complex automation tasks.

S7-1500R/H System Manual

(https://support.industry.

siemens.

com/cs/ww/en/view/10975483

OB 70 As of FW version V3.0, OB 70 (I/O redundancy

error) is available for the diagnostics of R1 and

S2 devices in S7-1500H systems.

S7-1500R/H System Manual

(https://support.industry.

siemens.

com/cs/ww/en/view/10975483

Otros manuales para SIMATIC S7-1500R/H

Tabla de contenidos

Otros manuales de Equipos industriales de Siemens

Siemens

Siemens SIMATIC CP 4163-5 Manual de usuario

Siemens

Siemens ST750 Manual de instalación y operación

Siemens

Siemens BD2 Manual de usuario

Siemens

Siemens 3VA912 0RL30 Series Manual de usuario

Siemens

Siemens 3RA2210 Manual de usuario

Siemens

Siemens MICROMASTER 440 Manual de usuario

Siemens

Siemens 3VA9673-0QE00 Manual de usuario

Siemens

Siemens 3VW9011-0AF01 Manual de usuario

Siemens

Siemens SIMATIC STEP 7 V5.2 Manual de usuario

Siemens

Siemens SINUMERIK 840 Manual de usuario

Siemens

Siemens MOBILETT XP Manual de usuario

Siemens

Siemens MindConnect Nano Manual de usuario

Siemens

Siemens SIRIUS 3RA1913-1 Series Manual de usuario

Siemens

Siemens SIRIUS 3RT263-1 Series Manual de usuario

Siemens

Siemens SINAMICS G130 Manual de lista de piezas

Siemens

Siemens 3WN6 Manual de usuario

Siemens

Siemens SIMATIC NET RUGGEDCOM RS900GPF Manual de usuario

Siemens

Siemens SIMATIC ET 200AL Documento técnico

Siemens

Siemens SIMATIC ET 200SP HA Manual de usuario

Siemens

Siemens 3VW9011-5AA00 Manual de usuario

Siemens

Siemens 3VT9300-1U 0 Series Manual de usuario

Siemens

Siemens SIMATIC NET S7-400 Documento técnico

Siemens

Siemens SIRIUS 3RA233-8X.30-1 Series Manual de usuario

Siemens

Siemens SIMATIC RF662A Manual de usuario

Manuales populares de Equipos industriales de otras marcas

ABB

ABB Unifix AD Manual

Mark 7

Mark 7 Evolution Manual de usuario

Husky

Husky HyPET Manual de usuario

bora

bora PM-1800 Manual de usuario

Grizzly

Grizzly T32428 Manual de usuario

ABB

ABB HT610965 Manual de usuario

ABB

ABB SafeLink Manual de usuario

Phoenix

Phoenix PHX-150 Manual de usuario

ABB

ABB A165-L32 Manual de usuario

ABB

ABB HT842936 Manual de usuario

Rioned

Rioned UrbanJet Manual de usuario

Hermetica

Hermetica 10 Series Manual de usuario

HORNER

HORNER OEE Solution Manual de usuario

Hammerhead

Hammerhead HG375 Manual de usuario

SCHUNK

SCHUNK VERO-S NSE-A3 138 Instrucciones de uso

ABB

ABB HT566657 Manual de usuario

Webasto

Webasto GSE CAN Manual de usuario

ABB

ABB HT614003 Manual de usuario