SideTrak Swivel Manual de usuario
User Manual
Patent Pending sidetrak.com
Welcome to a more productive you! No matter where you
work from, it may be at the ofce, at home, or even a coffee
shop, we would love to see your new multi-monitor setup!
Contact Us
(240) 580-8725
sidetrak.com
@sidetrakmonitor
@sidetrakmonitor
@sidetrak.monitor
4 Component List
5 Installation
12 Features
14 Second Monitor Setup
18 Conguration for PC
19 Conguration for Mac
20 FAQs
22 Troubleshooting
23 Technical Specications
24 Limited Liability Warranty
Contents
4
4
Optional USB wall
charger
USB-C to USB-C cord
with USB-A adapter
Short
USB-C to USB-C cord
with USB-A adapter
Long
Two Metal Plates Removal Tool Dual unit adapter tool
*Not needed for single unit
Component List Swivel
Menu buttons
Device-safe
Magnets
Bezel
Kickstand
Screen USB-C port
Mounting
frame
Swivel
5
Installation
USB-C to USB-C cord
Check your USB-C port for the symbols shown in the table below.
If you have one of the green checked symbols, then
your USB-C port is compatible.
NOTE: MacBook ports are compatible even if there are no symbols
next to it.
Connecting Your SideTrak Swivel
Check the ports on your laptop.
To connect your SideTrak Swivel use the USB-C to USB-C cord.
Watch the
installation
video here.
1
6
Installation cont.
Purchase SideTrak
USB-C Hub
If you don’t have a compatible USB-C port on your laptop or don’t have a
USB-C port at all, then you will need to download the DisplayLink driver.
However, if you have a Chrome laptop that doesn’t have a USB-C port, you
do not need to download the DisplayLink.
Download
DisplayLink
Driver
If you are setting up a triple screen, you may need to provide additional
power to turn on both monitors. Use the optional USB wall charger to
provide supplemental power to your monitors.
If your laptop only has one USB-C port, you may need to use a hub that
provides two USB-C ports. Check out SideTrak USB-C Hub.
Troubleshooting Issues? See page 17.
2
3
7
1
2
Installation cont.
Attach SideTrak Swivel to Your Laptop
Close laptop.
Make sure your SideTrak is unplugged from the laptop and the laptop is closed.
Align mounting guide.
Use the mounting guide that comes in your box to attach the metal plate
to either the left or the right of your laptop.
If you have the triple screen setup you will need to attach your SideTrak
to both the left AND the right side of your laptop.
If you have a single monitor but would like to have a triple screen setup you can buy a
second swivel.
Left-side Attachment.
To put your monitor on the left of your laptop,
make sure the opening is facing away from you.
Right-side Attachment.
To put the monitor on the right of your laptop,
make sure the laptop opening is facing you.
8
WHICH SIDE OF YOUR LAPTOP DO YOU
1 Make sure your laptop is closed and have the laptop
opening facing you.
2 Place paper on top of laptop. Align right edge of this guide
with the right edge of your laptop.
3 Peel the backing off of the metal plate and place ONE (1)
metal plate in the open space.
This is how the monitor will
look once attached.
This is how the monitor will
look once attached.
Installation cont.
WHICH SIDE OF YOUR LAPTOP DO YOU
1
Make sure your laptop is closed and have the laptop
openingfacing you.
2
Place paper on top of laptop. Align right edge of this guide
withthe right edge of your laptop.
3
Pleel the backing off of the metal plate and place ONE (1)
metalplate in the open space.
Left-side Attachment.
Place the mounting guide on top of your laptop and move it all
the way to the left side of your laptop so that the right edge of
the mounting guide aligns with the left edge of your laptop.
Right-side Attachment.
Place the mounting guide on top of your laptop and move it all
the way to the right side of your laptop so that the right edge of
the mounting guide aligns with the right edge of your laptop.
Place metal plate.
Peel the backing from the metal plate and place ONE (1) metal plate in the open space.
Make sure to align the SideTrak logo in the bottom right corner.
Apply pressure for 10 seconds and remove the mounting guide from your laptop.
Before attaching your SideTrak, give the metal plate a few minutes to allow the adhesive
to properly grip your laptop.
1
9
Installation cont.
NOTE: The metal plate will be semi-permanently adhered to your laptop. If you
would not like the metal plate adhered directly onto your laptop, we recommend
using a plastic laptop case or skin.
Attach SideTrak Swivel onto laptop.
After giving the metal plate a few minutes to adhere, clip the monitor to the metal plate
on your laptop.
It is easiest to slip when the monitor and mounting frame aren’t folded. Wiggle the
monitor’s mounting frame, if it pops off it is not fully clicked in. You will hear a loud click
when it is properly placed. Then, simply plug in and you’ll be all set to start using your
new SideTrak monitor!
If you are setting up the triple screen, ip page for second metal plate placement before
attaching your Swivel.
Learn more about
setting up your
triple screen.
If you DID NOT purchase a triple screen pack, but have just installed a second plate for your
second monitor (purchased another SideTrak single to create a triple setup), ip to page 14
to adjust your monitors so they can nest close on your laptop for easy transport.
4
10
Installation cont.
Rotate and align laptop.
Attach rst metal plate!
Rotate your laptop, so the metal plate you just attached is on your right. Align the left
edge of this paper to the left edge of your laptop.
Using the single screen attachment guide (opposite side) attach rst screen before continuing.
WHICH SIDE OF YOUR LAPTOP DO YOU
1
Make sure your laptop is closed and have the laptop
opening facing you.
2
Place paper on top of laptop. Align right edge of this guide
with the right edge of your laptop.
3
Pleel the backing off of the metal plate and place ONE (1)
metal plate in the open space.
Align to metal plate.
Align the blue dotted line to the top and bottom of your already placed metal plate.
Optional: Use tape to keep the paper in place.
Fold guide for metal plate spacing.
Fold the paper on the solid blue line. If needed fold the paper in a different spot until
the metal plate is revealed.
Triple Screen Attachment Quick Start
Other metal plate
Triple Screen Attachment
Other metal plate
Fold paper
!!
Triple Screen Setup
1
2
3
Tabla de contenidos
Otros manuales de Monitor de SideTrak
