How to setup record / record schedule
04
6
- Key Notice :
Enable IP Camera record or not.
If not selected at checkbox per camera, the
camera do not record anymore. Please make sure
to check this checkbox for recording.
For recording User should install HDD
necessarily. When HDD Data is full, if user want
to write data continuously, please select this
checkbox of Overwrite.
When user want to record by schedule, user can
congure this schedule record mode.
For setup schedule mode, user need to double
click on schedule table, then mode into schedule
setting mode.
Pleaser select ADD Button.
When user want to record by Motion schedule,
user can congure this Motion schedule record
mode.
For setup motion schedule mode, user need to
double click on schedule table, then mode into
schedule setting mode.
Pleaser select ADD Button.
additionally need to setup motion setting per
individual camera as the left below image.
IP NVR SNR-3000 Series