Shure E500 Manual de usuario
english
E500
Sound Isolating Earphones
Shure E500 Triple
Hi-Definition Drivers
with In-Ear Crossover
and Tuned-Port
Technology deliver the
most accurate acoustic
reproduction for the
ultimate in precision
highs and rich low-
end bass.
©2006, Shure Incorporated
27EN3221 (Rev. 1)
Printed in U.S.A.
WEARING THE EARPHONES
Two suggested methods for wearing the earphones are illustrated below.
Tighten the cable and take up slack by raising the cable sleeve.
Over the ear
in back
Over the ear
in front
english
INSERTING THE EARPHONES
If the earphone seems to be lacking in low frequency response (bass), check the
tightness of the seal between the earphone and your ear, or try one of the other
sleeve options.
Warning: Do not push the earphone sleeve beyond the ear canal opening.
Make sure that the sleeve completely
covers the earphone nozzle and is pushed
over the earphone nozzle barb. If any part
of the nozzle is exposed, the sleeve is not
properly installed. Replace the sleeves if
they do not grip the nozzle tightly.
left ear right ear
nozzle
barb
REMOVING THE EARPHONES
Do not pull on cable to remove earphone. Grasp the body of earphone and
gently twist to remove.
english
CHOOSING AN EARPHONE SLEEVE
Your earphones come with a selection of sleeves. Make sure the sleeve you
choose is easy to insert into your ear, fits comfortably, and is easy to remove
from your ear.
Foam Sleeves
When using the foam sleeves, compress the sleeve between
your fingers before inserting it into the ear canal. Hold the
earphone in place for about ten seconds while the foam
expands and creates a tight seal.
Soft Flex Sleeves
In small, medium, and large sizes. Made from pliable rubber.
Triple-Flange Sleeves
If desired, the sleeve nozzle may be shortened. Use sharp
scissors to carefully trim the nozzle to the desired length.
Flex Sleeves
In small, medium, and large sizes. Made from translucent
PVC.
Note: carefully slide the sleeve over the earphone nozzle barb for a secure grip.
CLEANING THE EARPHONE NOZZLE
If the nozzle of your earphone is blocked, clean the nozzle using the supplied
wax removal loop.
Nozzle
Wax Removal Loop
When cleaning, do not force any object through the earphone nozzle!
This will damage the earphone sound filter.
english
FURNISHED ACCESSORIES
Levelattenuator.............................EA650
Oval Carrying Pouch . . . . . . . . . . . . . . . . . . . . . . . . . 95B2441
Fit Kit w/ Cleaning Tool . . . . . . . . . . . . . . . . . . . . . . . 90XJ1371
Triple Flange Sleeves . . . . . . . . . . . . . . . . . . . . . . . . 90WX1371
ExtensionCable-9”.........................95A9167
Extension Cable - 3’. . . . . . . . . . . . . . . . . . . . . . . . . . 95B9167
Stereo Adapter Plug - 3.5mm (1/8”) to 1/4” . . . . . . . EA655
REPLACEMENT PARTS
Bagof20foamsleeves.......................EA120
Bag of 500 foam sleeves . . . . . . . . . . . . . . . . . . . . . . PA754
Bag of 10 clear flex sleeves:
small ................EA710S
medium . . . . . . . . . . . . . . EA710M
large.................EA710L
Bag of 10 soft flex sleeves:
small ................EA410S
medium . . . . . . . . . . . . . . EA410M
large.................EA410L
TECHNICAL SPECIFICATIONS
Transducer type Triple balanced-armature drivers
Sensitivity (at 1kHz) 119 dB SPL/mW
Impedance (at 1kHz) 36 W
Frequency Range 18 Hz - 19 kHz
Input connector 3.5 mm (1/8 in.) gold-plated stereo plug
Net weight 30 g (1 oz.)
Operational temperature -18° C to 57° C (0° F to 135° F)
Storage temperature -29° C to 74° C (-20° F to 165° F)
english
CUSTOM EARPHONE SLEEVES
Those who use earphones regularly for extended periods of time often find
custom-fit molded sleeves offer the best comfort and sound isolation.
Ask a Hearing Health Care Professional about creating custom molded sleeves
for your earphones. For more information, contact:
Sensaphonics Hearing Conservation Toll Free: (877) 848-1714
660 N. Milwaukee Avenue In Chicago: (312) 432-1714
Chicago, IL 60622
e-mail: [email protected]
www.sensaphonics.com
MAINTENANCE
Careful maintenance ensures a tight seal between the sleeve and nozzle,
improving sound quality and product safety.
Keep the earphones and sleeves as clean and dry as possible.
Do not expose earphones to extreme temperatures.
Wipe the earphones and sleeves with mild antiseptic to avoid
infections. Do not use alcohol-based disinfectants.
Replace the sleeves if they do not fit properly.
CERTIFICATION
Eligible to bear CE marking.
Conforms to European EMC Directive 89/336/EEC.
Meets applicable tests and performance criteria in European Standard
EN 55103 (1996) Parts 1 and 2, for residential (E1) and light industrial (E2)
environments.
SHURE Incorporated Web Address: http://www.shure.com
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
In U.S.A., Phone: 1-847-600-2000 Fax: 1-847-600-1212
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
In Asia, Phone: 1-852-2893-4290 Fax: 1-852-2893-4055
International Fax: 1-847-600-6446
Tabla de contenidos
Otros manuales de Auriculares de Shure
Shure
Shure Sound Isolating Series Manual de usuario
Shure
Shure Sound Isolating Manual de usuario
Shure
Shure KSE1500 Manual de usuario
Shure
Shure SE530 Manual de usuario
Shure
Shure SE530 Manual de usuario
Shure
Shure SE315 Manual de usuario
Shure
Shure SE112-BT1 Manual de usuario
Shure
Shure SRH144 Manual de usuario
Shure
Shure KSE1500 Manual de usuario
Shure
Shure Legendary Performance SRH145 Manual de usuario
Shure
Shure AONIC FREE Manual de usuario
Shure
Shure RMCE-TW1 Manual de usuario
Shure
Shure RMCE-BT2 Manual de usuario
Shure
Shure RMCE Manual de usuario
Shure
Shure E4c Manual de usuario
Shure
Shure Sound Isolating Instrucciones originales
Shure
Shure SRH1840 Manual de usuario
Shure
Shure i4c-t Manual de usuario
Shure
Shure SE115 Guía
Shure
Shure Sound Isolating Aonic 4 Manual de usuario
