Shua X6 Manual de usuario
User’s Manual
Contents
Motorized Treadmill ..................................................................................................................................................... 1
Assembly Parts List ........................................................................................................................................ 1
Moving Instructions............................................................................................................................................... 8
Specification .......................................................................................................................................................... 9
Data Sheet ....................................................................................................................................................... 9
Product Function Description ....................................................................................................................... 10
Safety Use Instruction ......................................................................................................................................... 12
User’s Guide ........................................................................................................................................................ 14
Before Exercise ............................................................................................................................................ 14
Exercising ..................................................................................................................................................... 14
Exercise Frequency ...................................................................................................................................... 14
Exercising Intensity ...................................................................................................................................... 14
Wearing ......................................................................................................................................................... 15
Stretch Exercise: ........................................................................................................................................... 15
Operation Instruction ........................................................................................................................................... 16
Built-in Program: P1-P8 ............................................................................................................................... 18
Error Display ................................................................................................................................................ 21
Exercise Safety Measures .................................................................................................................................... 21
Maintaining Guidance ......................................................................................................................................... 21
Method to Add the Silicon Oil ............................................................................................................................ 23
Maintenance Instructions..................................................................................................................................... 23
Adjust running belt to be in the middle ........................................................................................................ 24
V-Belt Adjusting ........................................................................................................................................... 24
Common faults and trouble shooting .................................................................................................................. 26
Equipment Warranty ............................................................................................................................................ 26
Warranty Range: ........................................................................................................................................... 26
Non human made damage caused during normal use and correct maintenance. ......................................... 26
Term of service: ............................................................................................................................................ 26
The following statement can not be included in the range of warranty: ...................................................... 26
Repair and Parts Replacements .................................................................................................................... 27
1 / 27
Motorized Treadmill
Assemble Instruction
Assembly Parts List
Part # Name Q.T.Y
. Part # Name
Spec.
Q.T.Y.
01 Main Frame 1 11 Motor Hood 1
02 Post Frame 1 12 Tapping Screw ST4.2*15 6
03 Lower Console 1 13 Hex Bolt M10*20 2
04 Upper Console 1 14 Hex Bolt M10*25 3
05 L Post Cover
(Upper) 1 15 Hex Bolt M8*40 4
06 L Post Cover
(Upper) 1 16 Hex Bolt M8*15 6
07 R Post Cover
(Upper) 1 17 Tapping Screw ST4.2*15 10
08 R Post Cover
(Lower) 1 18 Washer Ø10.5*ø20*t1.
5 3
09 Safety Key 1 19 Washer ø8.4*ø16*t1.6 4
10 Power wire 1 20 Water Holder Frame 1
21 Left Weighing Cover 1
22 Right Weighing Cover 1
2 / 27
Tools needed for the assembly
Philips Screw Driver
Open Spanner
Allen Wrench ø6mm (provided as spare parts)
Main Frame Post Frame Lower Console Upper Console L Post Cover (Upper)
L Post Cover (Lower) R Post Cover (Upper) R Post Cover (Lower) Safety Key
Power Wire Water Hold Frame Left Weighing Cover Right Weighing Cover
Open packing box and take out the above mentioned parts. Place machine body in ground horizontally.
Reminder: We recommend 3 persons to take body machine from the packing box, and 2 persons assemble treadmill
for the sake of safety.
3 / 27
Assembly Steps
Step 1:
a: Use Philips Screw Driver to disassemble #11and #12 parts from 01(see figure below), and collect #12 (screw)
b: take out 21 and 22, and stick them into 01, then they will be higher than 01 and will not loose and fall off
Notice:
a: Take motor hood out gently after disassembling screw. 2 screws at the left of motor hood, 2 at the right of motor
hood (see figure below).
b: the inner logo of 21 is L, the inner logo of 22 is R, positioning bar need to be placed in the hole of 01 steel board
12
Step 2:
Set post (#2) into main frame (#1), and connect B of main frame with B of post. Use Hex Bolt and Flat Washer (as
shown in figure) to fix #13, #14, and #18 into Main Frame. (Do not fix them tight)
Notice: When setting main frame, it needs 2 persons to operate, avoiding connector caught. When connecting,
please note the direction of BNC and do not pull the wire hard.
4 / 27
01
02
13
14
14
13
B
B
18
18
14
18
Step 3:
Set console (#3) into main frame (#2), and connect C of main frame with C of console. Use Allen Wrench (as
shown in figure) to fix console into #15 and #19. Screw it tight after 4 screws are screwed.
Notice: When setting main frame, it needs 2 persons to operate, avoiding connector caught. When connecting,
please note the direction of BNC and do not pull the wire hard.
15
19
03
C
C
02
16
16
5 / 27
Step 4:
Use Open Spanner to fix #5, #7 into console, and screw it tight.
Notice: When setting #5, #7 into console, please note the position of buckles at both side. Put it gently into plastic
parts of console. And it takes 2 persons to screw it.
03
07
05 17
Step 5:
Use PH Screw Driver to fix #6, #8 into console, and connect #5, #7. Finally, screw it tight.
Notice: When setting #6, #8 into #5, #7, please note the front buckle. And do not press the wire, screw it after
buckle settled.
03
02
17
06
08
6 / 27
Step 6:
Use Hexagon wrench to fix #4 into console. Screw it tight after 4 screws are screwed.
Notice: set #4, #3 into console position. Put #4 into console tightly and screw it. And it takes 2 persons to screw it.
16
03
04
Step 7:
A: Use Hexagon wrench and open spanner to tighten #13, #14.
B: Use the motor hood (#11) and screws (#12) that are disassembled at step 1, use Phillip screw driver to fix
#11 into #1, and screw it tight.
Notice: Put #11 into 1 at a certain angle. Please set gently into #1 in the middle of post at a certain angle and adjust
the position. Finally, screw it tight.
13
14
12
12
14
13
11 12
7 / 27
Step 8:
Fix safety key (#9) into #3, then put #20 into #3, connect #10 into #1 at last.
09
03
10
20
03
01
Caution!
Make sure the above assembly is finished properly as above steps before connecting the equipment with
electricity.
Carefully check below instruction before operating the treadmill.
8 / 27
Moving Instructions
To Move the Treadmill
Make sure the treadmill is fully stopped before trying to move it.
Stand towards the rear end of running deck. Lift up the rear end of the running deck as the arrow shown in
above picture.
Push the treadmill forward to your desired location and stop. Put the rear end down to the ground gently.
Attention!
Before moving treadmill, please make sure the power cord plug has been pulled from the socket. Otherwise it
may result damage to the plug and socket.
Tabla de contenidos
Manuales populares de Rueda de andar de otras marcas
Smooth Fitness
Smooth Fitness EVO 3i Manual de usuario
NordicTrack
NordicTrack NETL81810.0 Manual de usuario
Schwinn
Schwinn 830/Journey 8.0 Manual de usuario
Keys Fitness
Keys Fitness HealthTrainer HT-740T Manual de usuario
Spirit
Spirit XT8 Manual de usuario
NordicTrack
NordicTrack T 14.0 Treadmill Manual de usuario