IMPORTANT SAFETY INSTRUCTIONS
-Read these instructions.
-Keep these instructions.
-Heed all warnings
-Follow all instructions
-Water & Moisture / Power Supply
This unit should be protected from moisture and rain... It should not be used near water. i.e. bathtubs,
kitchen sink, pools or sprinkler systems etc...This unit should only be connected to a power supply of the
type indicated on the unit or described in this manual. Failure to comply could result in damage to this
product and/or injury to the user. Unplug this unit during electrical storms or when not being used for pro-
longed periods
-Heat
This unit should be located away from heat sources such as radiators, stoves or other appliances that
produce heat. To prevent the risk of fire, damage to this unit or personal injury, please use only the rec-
ommended fuse type as indicated in this manual.
-Fuse
Before replacing the fuse, make sure that the unit is turned off and disconnected from the AC power sup-
ply.
-Ventilation
Do not block areas of ventilation (i.e. cooling fins on heat sink) on this unit. Failure to comply could result
in overheating or fire.
-Electrical Connection
Always use in accordance with the manufacturers instructions. Improper electrical wiring will void the
product warranty
-Object and Liquid Entry
Please insure that foreign objects and/or liquids are not placed/spilled into the inside of the unit or into
various input and output openings for the unit
-Cleaning
Clean only with a dry cloth. Do not use solvents of any kind such as benzol, alcohol or gasoline to clean
this unit.
-Power Cord and Plug Only use accessories or parts recommended by the manufacturer.
-Servicing Do not attempt any service to this unit other than those described in this manual. Refer all
service issues to qualified service personnel only.
-Warning
Please remember that high sound pressure levels may not only temporarily damage hearing, but can
also cause permanent hearing loss. Please be careful to select appropriate volume levels.
IMPORTANT SAFETY SYMBOLS
This symbol is used to indicate that some hazardous live terminals are
involved with this apparatus, which even under normal operating conditions
may be sufficient to constitute a risk of electric shock or death.
This symbol is used in the service documentation to indicate that a specific
component shall be replaced only by the component specified in that docu-
mentation for safety reasons.
ON: Denotes the unit is turned on.
OFF:Denotes the unit is turned off.
WARNING: Describes precautions that should be observed to prevent the danger of injury or
death to the operator.
CAUTION: Describes precautions that should be observed to prevent damage to the unit.
Protective grounding terminal.
Alternating Current
Hazardous live Terminal
