Showven SPARKULAR WAVER Manual de usuario

USER MANUAL

SPARKULAR® WAVER

V1.1

2023/05/20

Showven Technologies Co., Ltd.

- 1 -

Thanks for choosing SPARKULAR!" WAVER, we wish it will sparks up your show.

Please read the following manual carefully before operating this product.

Δ Safety Instructions

\ Unauthorized repair are prohibited, it may cause serious incident.

\ Please keep the device dry.

\ Make sure lid of feeding hopper are well covered when use SPARKULAR!" WAVER.

\ Accidentally burning of consumable can only use sands to extinguish.

\ Consumable should keep away from moisture and stored in a dry sealed environment.

\ Check whether there is consumable aggregate in the output nozzle both before and after each

show, if any, please clean it up, or it will affect the firing effect, damage machine, even cause

serious incident.

\ There will be some sparks drop to ground, make sure there are no flammable objects such as

carpet on the ground within the safety radius of the machine.

\ Suggest to use HC8200 MEDIUM for indoor events.

\ The SPARKULAR!" WAVER power supply cable maximum allowed cascade of 6pcs (220V

version) / 3pcs (110V version), exceed connecting may result in damage or even cause fire.

\ Cover the output nozzle of SPARKULAR!" WAVER is forbidden, inspect the machine before

each show, making sure no objects or material will block the output nozzle.

\ Never touch the nozzle of SPARKULAR!" WAVER danger of getting burnt.

\ Never touch the sparks which shooting out from the nozzle.

Safety Distance

\ Safety distance for SPARKULAR® WAVER divided into two parts safety radius around machine

(a) and safety distance at firing direction (b). No person and flammable materials are allowed

to stay inside the safety isolation zone when SPARKULAR® WAVER was armed.

\ The safety radius around machine depends on effect height (consumable HC8200 type), with a

radius of 1m or 1.5m.

\ For safety distance at firing direction equals to maximum firing height + 1m. SPARKULAR®

WAVER with maximum ±90° waving firing angles, when firing wave sequence the safety

isolation zone is a three-dimensional sector area.

HC8200 Type

Max. Effect Height

Safety Radius around

SPARKULAR (a)

Safety Distance at Firing

Direction (b)

Medium

3.5m

4.5m

LARGE

4.5m

1.5m

5.5m

\ The SPARKULAR® WAVER safety isolation zone is a three-dimensional space with a cross-

section of 180° sector enclosed by a and b (check below diagram). We can understand it as a

safety area formed by a safety column with diameter of a, height of b rotate of ±90 degrees.

Unauthorized persons and objects are strictly prohibited from entering. Depending on the

firing sequence / angles the sector area changes accordingly.

\ For angled firing, the safety distance both around machine and firing direction should shift

accordingly.

- 2 -

\ In windy environment, increase the safety distance according to the wind direction and speed.

\ Sparks and consumables from the machine can lead to serious eye injury. Always wear safety

goggles when enter the safety zone.

Δ Description

SPARKULAR® WAVER is 180 degree waving spark effect originally developed by SHOWVEN. It

can firing in any single direction between -90 to 90 degree or in waving sequences etc. Various

editable sparks effect brings infinite creativity to your stage.

Δ Technical Specifications

\ DIMENSION: 300×290×273mm

\ WEIGHT: 15.5kg

\ VOLTAGE: AC200-240V / AC100-120V, 50/60Hz

\ WORK POWER: 500W

\ EFFECT HEIGHT ADJUSTBLE: YES

\ EFFECT ANGLE ADJUSTBLE: -90°~ 90° (180° waving angles)

\ INTERFACE: 3-pin and 5-pin XLR, POWER IN/OUT

\ CONTROL: 6 DMX channels

\ WORK TEMP.: -20°C~40°C

\ CONSUMABLE AND EFFECT HEIGHT: LARGE (3-4.5m), MEDIUM (2.5-3.5m)

- 3 -

Δ Structure of SPARKULAR® WAVER

1. Feeding Hopper Lid

2. Output Nozzle

3. ARM alarming light

4. Display Screen

5. Power Switch

6. Fuse

7. Power IN

8. Power OUT

9. 3-PIN DMX IN

10. 5-PIN DMX IN

11. 5-PIN DMX OUT

12. 3-PIN DMX OUT

Bottom panel

- 4 -

Δ Operation Panel

1. Keypad area

MENU: Press enter setting interface

UP: Parameter up

DOWN: Parameter down

MONI: Status monitoring of main part inside machine

2. Monitoring Interface

From this interface, we can check the voltage and motor status of machine.

3. RFID area

RFID card come with consumable HC8200 bags, swiping card to identify parameters and types of

granules. The RFID card is disposable, one card can only use one time. Each card can increase

- 5 -

single machine 20min working time, the maximum recharge time for SPARKULAR!" WAVER is

30min.

4. ARM alarming light

ON: DMX connected or wireless remote function ON.

BLINK: DMX armed, ready for firing

OFF: No DMX connection and wireless remote function OFF.

Δ Display Interface

1. Main Interface:

Background color of DMX area: red means DMX connected.

Background color of TEMP area: red means heating chamber temp. reached setting temp.

machine is ready for firing.

Indicator light status on power switch: flash means machine is heating up, long on means temp.

reached setting temp.

2. Error information

Error information

Explanation

E0 System IC

Systematic error

E1 Motor condition

Blower motor, shaft motor or feeding motor error

E2 Temp. Sensor

Temperature sensor is not connected or damaged

E3 P Temp. Over

Machine shutdown due to chassis over temperature

E4 Time Remain

Firing time is insufficient, please swipe RFID card

E5 K Temp. Over

Machine shutdown due to heating chamber over temperature

- 6 -

3. Set Up Menu

Press “MENU” enter setup menu, press LEFT, RIGHT to choose main menu, advanced menu or

factory menu. Press “EDIT” can entering related menu and setting up related parameters.

4. Main Menu

Parameters in main menu show in below table, press “UP”/ “DOWN” to change the value, please

remember to press “SAVE” to save the setting.

5. Advanced Menu

E6 Heat Fail

Heating fail, problem on heating PCB or mainboard

E7 Tip Over

Tilt sensor activated when machine slant over 45 degrees

Options

Range

Default

Explanation

Set DMX Address

1-512

Set DMX Address

Manual Heat

ON/OFF

OFF

Manual heat ON/OFF setting

Manual Fountain

ON/OFF

OFF

Manual Fountain ON/OFF setting

Sequence

2 - 72

Preset sequence setting

Max. Angle

-90°~90°

-90°

Max. Angle limit

Min. Angle

-90°~90°

90°

Min. Angle limit

Invert

ON/OFF

OFF

When turned on, all angles will be mirrored.

Head to middle

ON/OFF

When ON and Channel 1 DMX value is 0, output

nozzle will back to middle position after running a

preset sequence.

Options

Range

Default

Explanation

Set Temperature

500-620

580

Setup SPARKULAR!" heat chamber

temperature

Auto Clear Delay

0.1-0.9s

0.1s

Automatic clear material time setting

Wireless 2.4G

ON/OFF

OFF

2.4G wireless function setting

LCD Backlight

ON/OFF

LCD backlight setting

- 7 -

*For better performance of SPARKULAR!" WAVER, please don’t change the default value without

permission from SHOWVEN!".

6. DMX Channel Mode

SPARKULAR WAVER occupies 6 operational channels. First channel is for effect height, second

channel for effect trigger and clear material etc.

Channel

Function

Value

CH1

Manual Angle setup

0~255: angle change from -90° to 90°

128: straight upward (0°)

CH2

Manual Nozzle Waving

Speed setup

0 and 255: Max Speed

1~254: Speed increase

CH3

Firing ON/OFF

0~15: Firing OFF

16~90: Firing height low

91~170: Firing height medium

171~255: Firing height high

Maxi. Single firing duration is 60s

CH4

n/a

Reserved

CH5

Preset sequence setup

0-2: no preset sequence

3-255: preset sequence

DMX value = 2 + Sequence No.*2.55 (ROUND OFF)

CH6

Mode setup

0~49: Heating Up OFF (Emergency Stop)

50~200: Heating Up ON

201~255: Heating Up OFF (Emergency Stop)

Channel 1 (CH1): Manual Angle Setup

SPARKUALR WAVER output nozzle can be stayed at any angle between -90° to 90°, below is a

list of typical angles used in our preset sequence with related DMX value.

Angle No.

Angle

DMX value

Density

50-100

100

Feeding amount

Mode Selection

Factory Mode

User Mode

Factory mode is for engineer only. When

in Factory mode machine can’t controlled

by DMX console

Default Parameter

ON/OFF

OFF

Parameters reset to default setting

Motor Protect

ON/OFF

Motor protect function

Tip Over

ON/OFF

Tilt function switch, when machine

slant over 45 degree it will stop

working.

Standby Switch

ON/OFF

OFF

When ON, the machine can firing only

when heating up was finished

Motor Disabled

ON/OFF

OFF

Motor can’t waving when OFF

Key Sound

ON/OFF

Keypad press sound setting

- 8 -

90°

75°

60°

45°

30°

15°

108

0°

128 or 0

-15°

148

-30°

169

-45°

190

-60°

213

-75°

234

-90°

255

7. Firing Sequence

SPARKULAR WAVER has 72 preset sequences, operator use related channel DMX value or

sequence No. to access certain sequence. Below, you can find sequence list.

No.

Ignition angle

Description

Firing

Duration

CH5 DMX

Reference Value

Any angle

Clear material

Depends

on CH3

3-5

-90°

Fixed angle firing

Depends

on CH3

6-7

-75°

Fixed angle firing

Depends

on CH3

8-10

-60°

Fixed angle firing

Depends

on CH3

11-12

-45°

Fixed angle firing

Depends

on CH3

13-15

Tabla de contenidos

Otros manuales de Equipo de DJ de Showven

Showven

Showven Sparkular mini BT06 Manual de usuario

Showven

Showven SPARKULAR FALL Manual de usuario

Showven

Showven SONICBOOM X Manual de usuario

Showven

Showven SONICBOOM JET Manual de usuario

Showven

Showven SPARKULAR PRO BT71 Manual de usuario

Showven

Showven SPARKULAR miniFALL BT14 Manual de usuario

Showven

Showven X-F3600 Manual de usuario

Showven

Showven SONICBOOM PLUS SMOKEJET Manual de usuario

Showven

Showven uFlamer Gasboom Manual de usuario

Showven

Showven Circle Flamer X-F1800 Manual de usuario

Showven

Showven FXcommander Manual de usuario

Showven

Showven Circle Flamer X-F1800 Manual de usuario

Showven

Showven Sparkular Manual de usuario

Showven

Showven SPARKULAR JET Manual de usuario

Showven

Showven SPARKULAR TRIPLE BT51 Manual de usuario

Showven

Showven uFlamer Volcano Manual de usuario

Showven

Showven SPARKULAR BT01 Manual de usuario

Showven

Showven PyroSlave X16 Manual de usuario

Showven

Showven SPARKULAR JET Manual de usuario

Showven

Showven Sparkular Manual de usuario

Showven

Showven SPARKULAR JET Manual de usuario

Showven

Showven SPARKULAR PRO BT71 Manual de usuario

Showven

Showven SPARKULAR FALL Manual de usuario

Showven

Showven SPARKULAR TRIPLE BT51 Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario