QuickStart Guide SL HYDRUS 350 Luminaire
7Menu System
Sh wline
Lamp Control
Lamp ON/OFF ON or OFF Turns lamp ON or OFF. OFF is default.
Automatic On ON or OFF
When unit is first powered on, this setting
determines if the lamp is automatically struck.
Default setting is OFF.
Lamp On via DMX ON or OFF When this unit is connected to and sees a DMX
signal, the lamp will strike. Default is ON.
Lamp Off via DMX ON or OFF When this unit is no longer connected to or sees a
DMX signal, the lamp will douse. Default is ON.
Max. On Temp 20~79 Deg C (default is 45 deg C)
68~174 Deg F (default is 113 deg F)
Value which the lamp is capable of being struck. If
the temperature of the head is above the set value,
the lamp will not strike.
Lamp Off Temp 80~139 Deg C (default is 130 deg C)
176~282 Deg F (default is 266 deg F)
Value which the lamp will douse once it detects the
set temperature.
Personality
Status Settings
Address Via DMX ON or OFF Allows RDM setting of start address. Default is ON.
No DMX Status CLOSE /
HOLD / AUTO
Pan Reverse ON or OFF Setting to reverse the pan movement. Default is OFF.
Tilt Reverse ON or OFF Setting to reverse the tilt movement. Default is OFF.
Pan Degree 630 or 540 This setting sets the amount of pan travel 630 or 540
degrees. Default is 540 degrees.
Feedback ON or OFF Pan & Tilt motor position feedback. Default is ON.
Hibernation OFF / 1 to 99 Minutes Sets standby mode. Default is 15 minutes.
Service Setting Password XXX Password for RDM PID editing. Password is “050”
RDM PID XXXXXX Displays RDM PID Code.
Display Setting
Shutoff Time 2 to 60 minutes Sets the amount of time the LCD display will stay on
after last button press. Default is 5 minutes.
Display Reverse AUTO / ON / OFF
This menu option flips the LCD Display 180 degrees.
Default is AUTO (automatic flips according to
luminaire orientation).
Key Lock ON or OFF This option can be set to prevent unauthorized
changes (locks display). Default is OFF.
Temperature C/F Celsius or Fahrenheit Displays temperature values in the set scale. Default
is Celsius.
Initial Status Control XXX
Select Signal DMX Only / Art-Net On IP2 / Art-Net
On IP10
Selects the control system the luminaire will operate.
Default is DMX Only.
Set Universe 000 to 255 Sets the Art-Net Universe.
Reset Default ON or OFF Restores the fixture to factory defaults. Default is
OFF.
Reset Function
Reset All Resets (re-calibrates) all motors in the luminaire.
Reset Pan & Tilt Resets (re-calibrates) Pan and Tilt.
Reset Colors Resets (re-calibrates) color wheels.
Reset Gobos Resets (re-calibrates) gobos.
Reset Shutter Resets (re-calibrates) shutter / dimmer.
Reset Others Resets (re-calibrates) Zoom, Prism, and Animation
Effect Adjust
Test Channel Control XXX Manual selection of fixture parameters for ramping up
Manual Control Control XXX Select and adjust fixture parameters for local control.
Calibration
Calibrate Password Password is “050”
Pan XXX Sets centre points for parameter ranges.
Table 4: Menu Settings
First Level Second Level Third Level Description
Defines fixture behaviour on loss of DMX signal.
Default is Close.
Motors.
and down.
Selection and manual adjustment of fixture parameters
for initial powerup preset.
