Show Tec Creator compact 50729 Manual de usuario

Creator Compact

Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands

Ordercode: 50729

MANUAL

ENGLISH

Creator Compact

Ordercode: 50729

Table of contents

1. Overview.........................................................................................................................................................................2

1.1 Specifications ..........................................................................................................................................................2

2. Installation.......................................................................................................................................................................3

2.1 Unpack .....................................................................................................................................................................3

2.2 Safety instructions ...................................................................................................................................................3

3 Operation ........................................................................................................................................................................7

3.1 Front Panel ...............................................................................................................................................................7

3.2 Fixture area ..............................................................................................................................................................8

3.3 Playback area.........................................................................................................................................................9

3.4 Slider area: ...............................................................................................................................................................9

3.5 Control area: .........................................................................................................................................................10

3.6 Glossaries................................................................................................................................................................11

4 Channel Setup ..............................................................................................................................................................12

4.1 Channel types.......................................................................................................................................................12

4.2 Setup .......................................................................................................................................................................13

5 Fixture Control ...............................................................................................................................................................14

5.1 Fixture control in Programming Mode ..............................................................................................................14

4.2 Fixture control in Running Mode ........................................................................................................................14

6 Shape Generator .........................................................................................................................................................15

6.1 Load a shape ........................................................................................................................................................15

6.2 Edit a shape...........................................................................................................................................................15

6.3 Delete a shape .....................................................................................................................................................15

6.4 Playback Parameters ..........................................................................................................................................16

7 Scene..............................................................................................................................................................................17

7.1 Create.....................................................................................................................................................................17

7.2 Include scene........................................................................................................................................................17

7.3 Copy .......................................................................................................................................................................17

7.4 Delete .....................................................................................................................................................................17

7.5 Time .........................................................................................................................................................................18

7.6 Running...................................................................................................................................................................18

8. Chase ............................................................................................................................................................................19

8.1 Create.....................................................................................................................................................................19

8.2 Delete a step.........................................................................................................................................................19

8.3 Time of step............................................................................................................................................................19

8.4 Include a step .......................................................................................................................................................20

8.5 Global time ............................................................................................................................................................20

8.6 Delete a scene .....................................................................................................................................................20

8.7 Copy a chase .......................................................................................................................................................20

Creator Compact

Ordercode: 50729

8.8 Run...........................................................................................................................................................................20

9. Setup..............................................................................................................................................................................21

9.1 Wipe Playback ......................................................................................................................................................21

9.2 Wipe All...................................................................................................................................................................21

9.3 Switch display language.....................................................................................................................................21

9.4 Save & Load ..........................................................................................................................................................21

10 Maintenance ..............................................................................................................................................................22

11 Q/A ...............................................................................................................................................................................22

1. Overview

With preset shape effects of pan/tilt circle, RGB rainbow and dimming wave, Creator Compact DMX

controller can control up to 32 units of 12-channel fixtures. 12 playbacks and 5 preset shapes can be play

simultaneously. And sliders can be used to activate playbacks and adjust the intensity of the

dimmer channel in the playbacks.

1.1 Specifications

DMX channel

768

Fixture

Channels for each fixture

Playback

Playbacks to run simultaneously

Chase step

120

Time control of playbacks

Fade in/out, LTP slope

Shape for each scene/Step

Playback and dimmer by slider

Yes

Interlocked playback

Yes

Shape generator

Shapes of Dimmer, Pan/Tilt and RGB

Shapes to run simultaneously

Channel type setup

Yes. For shape enabling

Real time blackout

Yes

Power supply

9V/12V DC adapter

Power consumption

12 Watt

Creator Compact

Ordercode: 50729

2. Installation

2.1 Unpack

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure

that all parts are present, and have been received in good condition. Notify the dealer immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be

returned to the factory, it is important that the fixture be returned in the original factory box and packing.

Your shipment includes:

Creator Compact

Power cable

User manual

Optional Accessories

Goose-neck lamp (ordercode: 60722)

2.2 Safety instructions

Every person involved with the installation, operation and maintenance of this device has to:

be qualified

follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

Creator Compact

Ordercode: 50729

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-observance of

this manual or any unauthorized modification to the device.

Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

Never remove warning or informative labels from the unit.

Do not open the device and do not modify the device.

Never use anything to cover the ground contact.

Never leave any cables lying around.

Do not insert objects into air vents.

Do not connect this device to a dimmerpack.

Do not switch the device on and off in short intervals, as this would reduce the device’s life.

Do not shake the device. Avoid brute force when installing or operating the device.

Never use the device during thunderstorms, unplug the device immediately.

Only use device indoor, avoid contact with water or other liquids.

Do not touch the device’s housing bare-handed during its operation (housing becomes hot).

Only operate the device after having familiarized with its functions.

Avoid flames and do not put close to flammable liquids or gases.

Always keep case closed while operating.

Always allow free air space of at least 50 cm around the unit for ventilation.

Always disconnect power from the mains, when device is not used or before cleaning! Only handle

the power-cord by the plug. Never pull out the plug by tugging the power-cord.

Make sure that the device is not exposed to extreme heat, moisture or dust.

Make sure that the available voltage is not higher than stated on the rear panel.

Make sure that the power-cord is never crimped or damaged. Check the device and the power-

cord from time to time.

If the external cable is damaged, it has to be replaced by a qualified technician.

If the glass is obviously damaged, it has to be replaced. So that its functions are not impaired, due to

cracks or deep scratches.

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not

switch it on immediately. The arising condensation water might damage your device. Leave the

device switched off until it has reached room temperature.

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

For adult use only. Lighteffect must be installed out of the reach of children. Never leave the unit

running unattended.

For replacement use fuses of same type and rating only.

Allow time to cool down, before replacing lamp.

The user is responsible for correct positioning and operating of the Creator Compact. The

manufacturer will not accept liability for damages caused by the misuse or incorrect installation of

this device.

This device falls under protection class I. Therefore it is essential to connect the yellow/green

conductor to earth.

During the initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective.

Repairs, servicing and electric connection must be carried out by a qualified technician.

WARRANTY: Till one year after date of purchase.

Creator Compact

Ordercode: 50729

Operating Determinations

This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

The minimum distance between light-output and the illuminated surface must be more than 0.5

meter.

The maximum ambient temperature ta = 45°C must never be exceeded.

The relative humidity must not exceed 50 % with an ambient temperature of 45° C.

If this device is operated in any other way, than the one described in this manual, the product may

suffer damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

Connection with the mains

Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

International

EU Cable

UK Cable

US Cable

BROWN

RED

YELLOW/COPPER

FASE

BLUE

BLACK

SILVER

NUL

YELLOW/GREEN

GREEN

EARTH

Make sure that the device is always connected properly to the earth!

Improper installation can cause serious damage to people and property!

Creator Compact

Ordercode: 50729

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned

without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.

Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.

Be prepared to provide the model number, serial number and a brief description of the cause for the

return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper

inside the box:

1) Your name

2) Your address

3) Your phone number

4) A brief description of the symptoms

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any short-

comings and/or visible defects, or perform this check after our announcement that the goods are at their

disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be

reported to the carrier upon receipt of merchandise.

It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is

damaged due to shipping. Transportation damage has to be reported to us within one day after receipt

of the delivery.

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with

a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless

otherwise agreed in writing.

Complaints against us must be made known in writing or by fax within 10 working days after receipt of the

invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement,

regardless of the agreement of which the obligation is resulting.

Creator Compact

Ordercode: 50729

3 Operation

3.1 Front Panel

Creator Compact

Ordercode: 50729

The front panel consists of four areas:

3.2 Fixture area

including 16 <Fixture> buttons, <A ○|● B> button and <13 - 24> button. This controller can control 32

fixtures.

[DMX A ○|● DMX B]

Output port selection button. There are two port within Creator Compact, DMX A and DMX B. Each port

can output 384 channels, and operate 16 fixtures. While LED is dark, we can operate A port’s fixtures.

While LED is light, we can operate B port’s fixtures.

[13 - 24]

Each fixture can control 24 channels. But there are just 12 sliders on the Creator Compact. So we can

change t [1-12] and [13-24] by this button. While LED is dark, we can control [1-12] channels. While LED is

light, we can control [13-24] channels.

Creator Compact

Ordercode: 50729

3.3 Playback area

including 12 playback buttons, 2 page buttons and a 2-bit LED screen.

Playback

In Programming Mode (<Run> button inactivated), the <Playback> buttons are to implement the

functions of storing, deleting, editing, including and copying following the operations from the Control

area. In Running Mode, press a <Playback> button to flash scenes or chases, or stop/go chases step.

While chase is stop, the LED will flash.

Page

There 5 playback pages in this controller. Each page can store 12 playbacks.

3.4 Slider area:

including 12 sliders and Run button.

Run

Swap program and run mode. While the LED is dark, controller is in program mode. While the LED is light,

controller is in run mode. In Programming Mode, the sliders can be used to adjust the channel

values once a fixture is selected. In Running Mode, Raise slider up to run the playback. And pull it down

to close the playback. When the playback is running, the slider can be used to adjust the intensity of the

http Channel.

Tabla de contenidos

Otros manuales de Mezclador de Show Tec

Show Tec

Show Tec Easy Fade 36 Manual de usuario

Show Tec

Show Tec SM-16/2 Manual de usuario

Manuales populares de Mezclador de otras marcas

Bosch

Bosch GRW 9 Manual de usuario

MULTIQUIP

MULTIQUIP Whiteman WM45E Guía

KitchenAid

KitchenAid KSM7581BZ0 Guía rápida

Jay-Lor

Jay-Lor 5050 Manual de usuario

Sunbeam

Sunbeam FPSBSM210X Manual de usuario

MULTIQUIP

MULTIQUIP Whiteman MC94S Guía

Thinky

Thinky ARE-250 Manual de usuario

Midas

Midas XL4 Manual de usuario

bianco

bianco PURO 4 Manual de usuario

Paso

Paso DAG9200 Manual de usuario

Sima

Sima SFX-9A Manual de usuario

better chef

better chef IM-815WC Instrucciones de instalación

ALLEN & HEATH

ALLEN & HEATH GR1 Manual de usuario

Lacor

Lacor 69083 Hoja de especificaciones

M-Audio

M-Audio Midiman SAM Manual de usuario

Buffalo

Buffalo CP921 Manual de usuario

Pentair

Pentair HYPRO Cleanload 3376-0870 Instrucciones de operación

Cuisinart

Cuisinart SM50WHE Manual de usuario

Show Tec creator compact 50729 Manual de usuario

Manuales populares de Mezclador de otras marcas