Show Tec LED Foot 4 Manual de usuario

LED Foot 4 V2

ORDERCODE 50719

Congratulations!

You have bought a great, innovative product from Showtec.

The Showtec LED-Foot 4 brings excitement to any venue. Whether you want simple plug-&-play action or

a sophisticated DMX show, this product provides the effect you need.

You can rely on Showtec, for more excellent lighting products.

We design and manufacture professional light equipment for the entertainment industry.

New products are being launched regularly. We work hard to keep you, our customer, satisfied.

For more information: iwant@showtec.info

You can get some of the best quality, best priced products on the market from Showtec.

So next time, turn to Showtec for more great lighting equipment.

Always get the best -- with Showtec !

Thank you!

Showtec

Showtec LED-Foot 4 ™ Product Guide

Warning ...............................................................................................................................................................................2

Safety Instructions .........................................................................................................................................................2

Operating Determinations ..........................................................................................................................................4

Rigging ............................................................................................................................................................................4

Return Procedure..........................................................................................................................................................5

Claims..............................................................................................................................................................................5

Description of the device.................................................................................................................................................6

Overview ........................................................................................................................................................................6

Backside .........................................................................................................................................................................7

Set Up and Operation .......................................................................................................................................................8

1. Factory Reset ........................................................................................................................................................8

2. Channel Assignment ...........................................................................................................................................8

1. Scenes.........................................................................................................................................................................9

1.1 Program Scene...................................................................................................................................................9

1.2 Delete Scene ......................................................................................................................................................9

1.3 Delete All Scenes ...............................................................................................................................................9

1.4 Playback Scene .................................................................................................................................................9

1.5 Music or Auto mode........................................................................................................................................10

1.6 Program Blackout Scene................................................................................................................................10

2. Chases ......................................................................................................................................................................10

2.1 Program Chase ................................................................................................................................................10

2.2 Insert A Chase Step .........................................................................................................................................10

2.3 Modify A Chase Step ......................................................................................................................................11

2.4 Delete A Chase Step.......................................................................................................................................11

2.5 Delete A Chase ................................................................................................................................................12

3 MIDI PATCH ...............................................................................................................................................................12

Maintenance....................................................................................................................................................................13

Troubleshooting ...............................................................................................................................................................13

No Light.........................................................................................................................................................................13

No Response to DMX..................................................................................................................................................13

Product Specification .....................................................................................................................................................15

Warning

Unpacking Instructions

Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure

that all parts are present, and have been received in good condition. Notify the dealer immediately and

retain packing material for inspection if any parts appear damaged from shipping or the carton itself

shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be

returned to the factory, it is important that the fixture be returned in the original factory box and packing.

Your shipment includes:

• Showtec LED-Foot 4

• Incl. Power adapter 1,75m

•User manual

LED Expected Lifespan

LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration

of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular

optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is

significantly reduced. It is estimated that a viable lifespan of 40,000 to 50,000 hours will be achieved

under normal operational conditions. If improving on this lifespan expectancy is of a higher priority, place

care in providing for lower operational temperatures. This may include climatic-environmental and the

reduction of overall projection intensity.

Safety Instructions

Every person involved with the installation, operation and maintenance of this device has to:

-be qualified

-follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-

observance of this manual or any unauthorized modification to the device.

Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

Never remove warning or informative labels from the unit.

Do not open the device and do not modify the device.

Never use anything to cover the ground contact.

Never leave the device run without a lamp!

Never look directly into the light source.

Never leave any cables lying around.

Do not insert objects into air vents.

Do not connect this device to a dimmerpack.

Do not switch the device on and off in short intervals, as this would reduce the device’s life.

Do not shake the device. Avoid brute force when installing or operating the device. The LED-Foot

4 reacts very sensitive to movement.

Never use the device during thunderstorms, unplug the device immediately.

Only use device indoor, avoid contact with water or other liquids.

Do not touch the device’s housing bare-handed during its operation (housing becomes hot).

Only operate the device after having familiarized with its functions.

Avoid flames and do not put close to flammable liquids or gases.

Always keep case closed while operating.

Always allow free air space of at least 50 cm around the unit for ventilation.

Always disconnect power from the mains, when device is not used or before cleaning! Only

handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.

Make sure that the device is not exposed to extreme heat, moisture or dust.

Only install the device with the hanging-bracket.

Make sure that the available voltage is not higher than stated on the rear panel.

Make sure that the power-cord is never crimped or damaged. Check the device and the power-

cord from time to time.

If the external cable is damaged, it has to be replaced by a qualified technician.

If the lens or glass is obviously damaged, it has to be replaced. So that its functions are not

impaired, due to cracks or deep scratches.

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do

not switch it on immediately. The arising condensation water might damage your device. Leave

the device switched off until it has reached room temperature.

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

For adult use only. Lighteffect must be installed out of the reach of children. Never leave the unit

running unattended.

For replacement use fuses of same type and rating only.

Allow time to cool down, before replacing lamp.

The user is responsible for correct positioning and operating of the LED-Foot 4. The manufacturer

will not accept liability for damages caused by the misuse or incorrect installation of this device.

This device falls under protection class I. Therefore it is essential to connect the yellow/green

conductor to earth.

During the initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective.

Repairs, servicing and electric connection must be carried out by a qualified technician.

WARRANTY: Till one year after date of purchase.

CAUTION ! EYEDAMAGES !.

Avoid looking directly into the light source.

(meant especially for epileptics) !

Operating Determinations

•This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

•The minimum distance between light-output and the illuminated surface must be more than 0.5 meter.

•The maximum ambient temperature ta= 45°C must never be exceeded.

•The relative humidity must not exceed 50 % with an ambient temperature of 45° C.

•If this device is operated in any other way, than the one described in this manual, the product may

suffer damages and the warranty becomes void.

•Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.

You endanger your own safety and the safety of others!

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other

safety issues.

Do not attempt the installation yourself !

Always let the installation be carried out by an authorized dealer !

Improper installation can cause serious damage to people and property !

Connection with the mains

Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

International

EU Cable

UK Cable

US Cable

BROWN

RED

YELLOW/COPPER

FASE

BLUE

BLACK

SILVER

NUL

YELLOW/GREEN

GREEN

EARTH

Make sure that the device is always connected properly to the earth!

Return Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned

without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.

Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.

Be prepared to provide the model number, serial number and a brief description of the cause for the

return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.

Note: If you are given an RMA number, please include the following information on a piece of paper

inside the box:

1) Your name

2) Your address

3) Your phone number

4) A brief description of the symptoms

Claims

The client has the obligation to check the delivered goods immediately upon delivery for any short-

comings and/or visible defects, or perform this check after our announcement that the goods are at their

disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be

reported to the carrier upon receipt of merchandise.

It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is

damaged due to shipping. Transportation damage has to be reported to us within one day after receipt

of the delivery.

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with

a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless

otherwise agreed in writing.

Complaints against us must be made known in writing or by fax within 10 working days after receipt of the

invoice. After this period complaints will not be handled anymore.

Complaints will only then be considered if the client has so far complied with all parts of the agreement,

regardless of the agreement of which the obligation is resulting.

Description of the device

Features

The LED-Foot 4 is a light controller from Showtec and features:

•4 Channel patchable LED par controller

•Can be used with any LED Parcan

•Patchable

•Music control

•Foot control

•Total control to 4 groups of LED Parcans

•The LED-Foot can work with any LED fixture in the market

•Programming of programs is easy and simple

•Once the LED Foot is patched and programmed it can be controlled easily by your feet

•Scene selection, Chases selection, Function, it all can be controlled by your foot

•Ideal solution for musicians who do not have their hands free to control their lighting

•Power input: 100-240V - 500mA, Power output: DC 12V

•Power consumption: 20 Watt

•Power connector: Adapter (included)

•Chases: 12 with 24 steps

•Scenes: 24

•Fixtures: 4

•DMX-512: XLR 3 pole

•3 modes in playback mode: Blackout mode, Music mode, Auto Mode

•Dimensions: 360 x 183 x 69 mm (W x D x H)

•Weight: 1,5 kg

NOTE:

Knowledge of DMX is required to fully utilize this unit.

Overview

1 2 3 4 5 6 7 8 9

10 11 12 13 14 Fig. 1

Backside

15 16 17 18 19 20

Fig. 2

1) Fixture 1-4

2) Record button

3) Patch button

4) Blackout button: Press the Blackout button to cut all output.

5) Red control

6) Green control

7) Blue control

8) Master control

9) Audio sensitivity control

10) Mode/Channel Patch Foot pedal

11) Up Foot pedal

12) Down Foot pedal

13) Function/Enter pedal

14) Music/Auto/Black Out pedal

15) Midi

16) Audio Line Input

17) DMX Output

18) DMX Polarity Switch

19) Power input DC12V/500mA

20) Power On/Off

Set Up and Operation

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

Remove all packing materials from the LED-Foot 4. Check that all foam and plastic padding is removed.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

1. Factory Reset

1. When the Blackout LED is off, press and hold the Record button (2) + Blackout Button (4) for 5

seconds until all LEDs flash.

The controller will reset to its default factory setting.

2. Channel Assignment

1. To enter the channel assignment mode press the Patch button (3) for 3 seconds. The Patch LED will

light up red, which indicates the controller is in channel assignment mode.

2. To select the fixture you want to patch, press one or multiple Fixture buttons (1). When the Fixture LED

lights up blue, the fixture can be patched.

-Each fixture occupies 7 DMX Channels

-DMX channel 1-128 can be assigned

3. To select a DMX channel, press the Mode/Channel Patch pedal (10) and select the DMX channel

you want to patch.

4. When you want to select a fixture function, press the UP and DOWN pedals (11+12). You can now

select the fixture function, you want to use to control the DMX channel.

5. The fixture functions you can choose are: RED, GREEN, BLUE, MASTER and NO PATCH.

The NO PATCH Channel means this DMX channel is not controlled by any of the 4 rotor controls.

6. The "F" letter on the display indicates the Fixture number, so F1RED means Fixture 1, RED Rotary.

There are 7 channels available for every fixture.

However there are only 4 rotary controls.

But you can use all 7 channels, example:

Fixture 1 CH1 Red, Fixture 2 CH2 Red, Fixture 3 CH3 Red, CH4 Green, CH5 Blue, CH6 Master, CH7 NO

PATCH.

7. To save the patch assignment, press the Enter pedal (13) to save the patch assignment. All LEDs will

flash 3 times.

8. When you want to patch more DMX channels, repeat step 2 - 5 to patch other channels.

9. To exit the channel assignment mode, press and hold the Patch button (3) for 3 seconds.

The red Patch LED will dim.

Tabla de contenidos

Otros manuales de Equipo de DJ de Show Tec

Show Tec

Show Tec Spectral 2500 Zoom Tour Manual de usuario

Show Tec

Show Tec DB-1-4/RDM Manual de usuario

Show Tec

Show Tec Shogun Pro-500 Manual de usuario

Show Tec

Show Tec Accent Spot Q4 V1 Manual de usuario

Show Tec

Show Tec MINI STUDIOBEAM RGB Manual de usuario

Show Tec

Show Tec WTF-FZ1500 1500W DMX Fazer Manual de usuario

Show Tec

Show Tec Polar 1920 Wash Manual de usuario

Show Tec

Show Tec Single WDP-1 Pro V1 Manual de usuario

Show Tec

Show Tec Galactic G30 30mW Manual de usuario

Show Tec

Show Tec XS-4W Quad Beam Manual de usuario

Show Tec

Show Tec EventSpot 1600 Q4 Manual de usuario

Show Tec

Show Tec 42300 Manual de usuario

Show Tec

Show Tec LED Wash Ultra Bright Compact RGB Manual de usuario

Show Tec

Show Tec ColorCue 2 AIR Manual de usuario

Show Tec

Show Tec LED Messenger Manual de usuario

Show Tec

Show Tec ACT Image Spot 50 CW V1 Manual de usuario

Show Tec

Show Tec Data Flash Strobe Manual de usuario

Show Tec

Show Tec Helix M1000 Q4 Mobile Manual de usuario

Show Tec

Show Tec Cameleon Bar 12-3 Manual de usuario

Show Tec

Show Tec LED PAR 64 AIRCRAFT Manual de usuario

Show Tec

Show Tec EventLITE 7/4 Manual de usuario

Show Tec

Show Tec Single WDP-1 Manual de usuario

Show Tec

Show Tec Astro 360 XL Manual de usuario

Show Tec

Show Tec Helix M1100 Q4 Mobile Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario