Show Tec LED City Painter 45 Manual de usuario

LED City Painter 45

ORDERCODE 40906

Congratulations!

You have bought a great, innovative product from Showtec.

The Showtec LED City Painter 45 brings excitement to any venue. Whether you want simple plug-&-play

action or a sophisticated DMX show, this product provides the effect you need.

You can rely on Showtec, for more excellent lighting products.

We design and manufacture professional light equipment for the entertainment industry.

New products are being launched regularly. We work hard to keep you, our customer, satisfied.

For more information: iwant@showtec.info

You can get some of the best quality, best priced products on the market from Showtec.

So next time, turn to Showtec for more great lighting equipment.

Always get the best -- with Showtec !

Thank you!

Showtec

Showtec LED City Painter 45™Product Guide

Warning..…...................................................................................…………………………………………..................

Safety-instructions…………………………………………………………………………………….…......................

Operating Determinations…………………………………………………………………………….......................

Rigging…………………………………………………………………………………………………………................

Installing and Positioning ………………………………………………………………..…………………................

Description..…..............................................................................……….……………………………….…................

Features and Overview ………………………………...….……………….………….………………………………

Backside…………………………………………………...…...….……………….…………………........................…

Installation...............................................................................…...…………………………………….…...................

Installing the Lamp ........................................................………………………………………..……………………

Set Up and Operation.....................................................................……..……………………………….………….…

One City Painter .........................................................................……………………………………………….…..

Multiple City Painters…........................................................................…………………………………………….

Control Panel…....................................................………………………………………………………………………..

Control Mode........................................……………………………………………………………………………….

DMX Addressing...................................………………………………………………………………………………..

Multiple City Painters & DMX Addresses……………………………………………………………………………..

DMX Protocol……………...................................………………………………………………………………………

DMX Channels...................................…………………………………………………………………...................…

Menu Settings...................................................................................………………………………………………..

Illuminance Distribution.......................................................................……………………………………………..

Maintenance...................................................................................………..………….…….…………………….…...

Replacing the Fuse........................................................................…………………….…………………………...

Troubleshooting............................................................................………………….………………….………………..

No Light, No Movement - All Products............................................………………….……………………………

No Response to DMX ....................................................................………………….…………………………..….

Product Specifications.................................................................……………….…….…………………....................

WARNING

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE YOUR INITIAL START-UP!

SAFETY INSTRUCTIONS

Every person involved with the installation, operation and maintenance of this device has to:

-be qualified

-follow the instructions of this manual

Before your initial start-up, please make sure that there is no damage caused by transportation. Should

there be any, consult your dealer and do not use the device.

To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to

follow the safety instructions and warning notes written in this manual.

This manual must be kept with the fixture for future consultation. In the event of the fixture being sold or

passed to another user, always make certain that the booklet is with the unit, to enable the new owner to

be informed on its operation and relative care.

Please consider that damages caused by manual modifications to the device are not subject to

warranty.

This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

IMPORTANT:

The manufacturer will not accept liability for any resulting damages caused by the non-

observance of this manual or any unauthorized modification to the device.

Never let the power-cord come into contact with other cables! Handle the power-cord and all

connections with the mains with particular caution!

Never remove warning or informative labels from the unit.

Never use anything to cover the ground contact.

Never run the device without lamp!

Never ignite the lamp if the objective-lens or any housing-cover is open, as discharge lamps may

expose and emit a high ultraviolet radiation, which may cause burns.

Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged.

Always hold the fixture at the transport handles.

Never look directly into the light source.

Never leave any cables lying around.

Never unscrew the screws of the rotating gobo, as the ball bearing will otherwise be opened.

Never use the device during thunderstorms, unplug the device immediately.

Never leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within

children’s reach, as they are potential sources of danger.

Do not insert objects into air vents.

Do not connect this device to a dimmerpack.

Do not switch the device on and off in short intervals, as this would reduce the lamp’s life.

If the lamp has been turned OFF, let the lamp cool down for 15 minutes, before turning the lamp

ON again.

Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).

CAUTION!

Keep this device away from rain and moisture!

Unplug mains lead before opening the housing!

CAUTION! Be careful with your operations.

With a dangerous voltage you can suffer

a dangerous electric shock when touching the wires!

Do not shake the device. Avoid brute force when installing or operating the device.

Only use device indoor, avoid contact with water or other liquids.

Only operate the fixture after having checked that the housing is firmly closed and all screws are

tightly fastened.

Only operate the device after having familiarized with its functions.

Avoid flames and do not put close to flammable liquids or gases.

Always replace the lamp, when it is damaged or deformed due to the heat.

Always keep case closed while operating.

Always allow free air space of at least 50 cm around the unit for ventilation.

Always disconnect power from the mains, when device is not used, before cleaning or when

replacing lamp! Only handle the power-cord by the plug. Never pull out the plug by tugging the

power-cord.

Make sure that the device is not exposed to extreme heat, moisture or dust.

Make sure that the available voltage is not higher than stated on the rear panel.

Make sure that the power-cord is never crimped or damaged. Check the device and the power-

cord from time to time.

Make sure that no side forces can impact on the truss system.

The cable insert or the female part in the device must never be strained. There must always be

sufficient cable to the device. Otherwise, the cable may be damaged which may lead to deadly

electrical shocks.

If the external cable is damaged, it has to be replaced by a qualified technician.

If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due

to cracks or deep scratches.

If device is dropped or struck, disconnect mains power supply immediately. Have a qualified

engineer inspect for safety before operating.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do

not switch it on immediately. The arising condensation water might damage your device. Leave

the device switched off until it has reached room temperature.

If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely

(preferably in the original packing material), and return it to your Showtec dealer for service.

For adult use only. City Painter must be installed out of the reach of children. Never leave the unit

running unattended.

For replacement use lamps and fuses of same type and rating only.

Allow time to cool down, before replacing lamp.

The user is responsible for correct positioning and operating of the City Painter. The manufacturer

will not accept liability for damages caused by the misuse or incorrect installation of this device.

This device falls under protection class I. Therefore it is essential to connect the yellow/green

conductor to earth.

During the initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective.

Repairs, servicing and electric connection must be carried out by a qualified technician.

WARRANTY: Till one year after date of purchase.

CAUTION ! EYEDAMAGES !.

Avoid looking directly into the light source.

(meant especially for epileptics) !

OPERATING DETERMINATIONS

This device is not designed for permanent operation. Consistent operation breaks will ensure that the

device will serve you for a long time without defects.

The minimum distance between light-output and the illuminated surface must be more than 1.5 meter.

The maximum ambient temperature ta= 45°C must never be exceeded.

The relative humidity must not exceed 50 % with an ambient temperature of 45° C.

If this device is operated in any other way, than the one described in this manual, the product may suffer

damages and the warranty becomes void.

Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash

etc.

You endanger your own safety and the safety of others!

Improper installation can cause serious damage to people and property !

Connection with the mains

Connect the device to the mains with the power-plug.

Always pay attention, that the right color cable is connected to the right place.

International

EU Cable

UK Cable

US Cable

BROWN

RED

YELLOW/COPPER

FASE

BLUE

BLACK

SILVER

NUL

YELLOW/GREEN

GREEN

EARTH

Make sure that the device is always connected properly to the earth!

Rigging

Please follow the European and national guidelines concerning rigging, trussing and all other

safety issues.

Do not attempt the installation yourself !

Always let the installation be carried out by an authorized dealer !

Procedure:

If the LED City Painter is lowered from the ceiling or high joists, professional trussing systems have to

be used.

Use a clamp to mount the LED City Painter, with the mounting-bracket, to the trussing system.

The LED City Painter must never be fixed swinging freely in the room.

The installation must always be secured with a safety attachment, e.g. an appropriate safety net

or safety-cable.

When rigging, derigging or servicing the LED City Painter, always make sure, that the area below

the installation place is blocked and staying in the area is forbidden.

The LED City Painter can be placed on a flat stage floor or mounted to any kind of truss by a clamp.

Improper installation can cause serious damage to people and property !

LED City Painter can be panned through + or –45° and tilted backwards –75° and forwards +15°.

The required movement is fixed by means of the screws on the head support, as shown in the diagram.

The hex keys for fixing PAN and TILT are supplied with the fixture and are (respectively) 8 mm. socket

screw and a 3 mm. socket screw

The LED City painter can be permanently mounted, by using the four holes on its base.

It is also possible to fit a display safety cover, to avoid any unauthorized use of the front control panel.

Installing and Positioning

The display cover is fitted as follows:

1. Loosen the hex screws fixing the horizontal positioning bracket using a T10 Tork Screw provided.

2. Turn the bracket 45° to uncover the top fixing screws of the front panel.

3. Remove the first two screws with a screwdriver (not supplied).

4. Turn the head’s horizontal positioning bracket –45° until the other two front panel screws can be seen.

5. Remove the last two screws with a screwdriver (not supplied).

6. Now remove the front panel.

7. Fit the protective cover to the display.

8. Replace the front panel again, following the procedure described above.

Description of the device

Features

The Showtec LED City Painter 45 is a colourchanger with high output and great effects.

In the standalone mode it is possible to create 5 programs with each max 10 scenes.

• DMX-control via standard DMX-controller

• Create Programs and scenes to start at a certain time and date

• 7 DMX-control channels required

• IP-65 Protection degree

•24 Red LEDs 1Watt, 18 Green LEDs 3Watt, 7 Blue LEDs 3 Watt

• Stand-alone control or Master–Slave control

• Dimmer

• Strobe

Overview

Fig. 1

1) LEDs

2) Adjustment Screw for inclination angle

Backside

Fig. 2

3 4 5

3) Powercord

4) DMX signal connector (IN)

5) DMX signal connector (OUT)

Installation

Installing the LED Lights

The Showtec LED City Painter 45 uses LED lights. LED lights do not have to be replaced.

Damages caused by non-observance are not subject to warranty.

Tabla de contenidos

Otros manuales de Equipo de DJ de Show Tec

Show Tec

Show Tec White-PIX V1 Manual de usuario

Show Tec

Show Tec EVENTLITE 6/3 Manual de usuario

Show Tec

Show Tec Performer Pendant 75 Q6 Manual de usuario

Show Tec

Show Tec GALACTIC BEAM G40 V1 Manual de usuario

Show Tec

Show Tec Polar 340 WashFX Manual de usuario

Show Tec

Show Tec Booster IP 1-4 3-pin V1 Manual de usuario

Show Tec

Show Tec LED Par 36 DMX Manual de usuario

Show Tec

Show Tec COMPACT POWER LIGHTSET 4 RGBW Manual de usuario

Show Tec

Show Tec MINI MAX LED RGB 40363 Manual de usuario

Show Tec

Show Tec Mirrorball 20 Sm V1 Manual de usuario

Show Tec

Show Tec Single MKII Manual de usuario

Show Tec

Show Tec Star Sky Pro Manual de usuario

Show Tec

Show Tec Pixel Bar 12 Q6 Manual de usuario

Show Tec

Show Tec Unicorn Manual de usuario

Show Tec

Show Tec Candela Pix 50 Manual de usuario

Show Tec

Show Tec Floodlight 1 kW Symmetric Manual de usuario

Show Tec

Show Tec ACT Image Spot 50 CW V1 Manual de usuario

Show Tec

Show Tec Quick DMX Rack 1024 Manual de usuario

Show Tec

Show Tec SHARK SPOT ONE Manual de usuario

Show Tec

Show Tec Performer 1500 Fresnel Daylight Manual de usuario

Show Tec

Show Tec Cameleon Spot 18-4 Q4 Manual de usuario

Show Tec

Show Tec Single WDP-1 Manual de usuario

Show Tec

Show Tec eventbar 12/3 Manual de usuario

Show Tec

Show Tec LED Roto Flower Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario