Shomar P873MDBI Manual de usuario
Built In Fridge Freezer
P873MDBI
INSTRUCTIONS:
Please read and keep safe for future use.
Features…………………………….………………………………………………………………..
Transportation Instructions....................................................................
Introduction & Safety Warnings............................................................
Electrical Requirements ………………….......................................................
Installation / Door Reversal………………………………………………………………..
Food Storage……………………………............................................................
Defrosting.............................................................................................
Arrangement of Food……………….…………………………………………………………
Temperature Control .................……………………………..............................
Cleaning and care ……………………..………………….……………………….……………
Replacing the interior light bulb/Top Tips………………………….…………………
Problem Solving.......................................................................................
Health and Safety....................................................................................
Warranty Information..............................................................................
Customer Care ……………………………………………………………………………………..
Installation and User Instructions
Features
•When transporting, never tilt the appliance to more than 45 degrees.
•The appliance should be transported only in a vertical upright position
•The packaging as supplied must be intact during transportation
•If during the course of transport the appliance has to be transported
horizontally, it must only be laid on its left hand side when standing in
front of the appliance. After bringing it to the upright position, it must not
be operated for at least 4 hours to allow the system to settle. The
manufacturer will not be held responsible if these instructions are
disregarded.
•The appliance must be protected against rain and moisture
•When positioning your appliance take care not to damage your flooring,
Kitchen furniture, related parts and doors, pipes, wall coverings etc.
•Empty any water in the drain tray before moving. See section ‘Defrosting’
and ‘Care & cleaning’ for further information
•Do not move the appliance by pulling by the door
•Hold the base and lift the refrigerator carefully
•Never hold the door handle as support
•Never place the refrigerator upside down or lie it down
•Move refrigerator by using its two hind roller feet as an axis and then
tilting it slightly to move
•Make sure that the defrost water pipe at the back of the product is fixed
to the plastic evaporating pan on the top of the compressor, to avoid
defrost water spillage on the floor
Care must be taken while cleaning / carrying the appliance to avoid
Touching the bottom of the condenser metal wires at the back of the
Appliance as you might injure your fingers and hands.
Transportation of your Appliance
IMPORTANT! DO NOT connect your appliance to the electricity supply until all
Packing and transit protectors have been removed.
•Leave to stand for at least 4 hours before switching on to allow
compressor oil to settle if transported horizontally
•If you are discarding an old refrigerator with a lock fitted to the door,
disable the lock, ensure that it is left in a safe condition to prevent the
entrapment of young children
•This fridge/freezer must only be used for its intended purpose i.e. the
storing and freezing of edible foodstuff
•Do not dispose of the appliance on a fire
•Take care not to damage the cooling circuit, if damaged immediately
ventilate the room where the appliance is situated and ensure there is no
exposure to a naked flame
•This appliance should not be used in an unheated, cold room i.e. Garage,
conservatory, annex, shed, out-house etc.
•Ensure that the plug remains readily accessible
•Failure to observe these instructions may invalidate your right to free
service during the guarantee period
•We recommend a separate switch be used to ensure easy switch on / off
•Children should be supervised to ensure that they do not play with the
appliance
•This appliance is intended to be used in a household environment
•Do not use mechanical devices or other means to accelerate the
defrosting process
Before First Use
IMPORTANT WARNING:
Keep ventilation openings in the appliance enclosure and the built-in
structure clear of obstruction.
Make sure that mains cable is not caught under the appliance during
and after carrying / moving the appliance, to avoid the mains cable
becoming cut or damaged.
Before you insert the plug into the wall socket make sure that the voltage and
The frequency shown in the rating plate inside the appliance corresponds to
Your electricity supply. We recommend that this appliance is connected to the
mains supply via a suitable switched and fused socket in a readily accessible
position.
Should the mains lead of the appliance become damaged or should it need
Replacing at any time, it must be replaced by a special purpose made mains
Lead which can only be obtained from Shomar Ltd.
WARNING! THIS APPLIANCE MUST BE EARTHED
If the fitted plug is not suitable for your socket, then the plug should be removed
and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with
bared cord could cause a shock hazard if inserted into a socket. The plug on this
appliance incorporates a 13 A fuse. Should the fuse need to be a fuse of the same
rating must be used. Ensure that the fuse cover is refitted.
Electrical Requirements
1. Install the refrigerator on a flat surface in order to prevent vibration and
noise.
2. Choose a dry well-ventilated place. A space of no less than 10 cm must be
left around the refrigerator.
3. The minimum space in the room where the refrigerator is being installed
is 10 cubic metres.
4. This fridge freezer has been designed to operate in ambient temperatures
Of between +5 and +32 degrees C
5. Choose a location where there is no heat source. Keep the refrigerator
away from direct sunlight, oven etc.
6. Once the appliance is in place adjust the levelling feet at the front by
turning them.
7. Do not place the appliance near cookers, radiators or in direct sunlight as
This will cause your appliance to work harder. . If installed next to a
source of heat or freezer, maintain the following minimum side
clearances:
From Cookers 50 mm
From Radiators 300 mm
From Freezers 25 mm
Installation Instructions
Minimum space underneath refrigerator 200 cm ²
8. Ensure that there is sufficient ventilation and that the cabinet is of
adequate size.
9. Slowly and carefully push the appliance inside the cabinet.
10. Push the appliance into the cabinet and adjust it to make sure the
edge on the top baffle completely touches the top edge of the
cabinet and the limit hook for the supporting leg completely
touches the bottom edge of the cabinet.
11. Fix the supporting leg with screws also fix the Top baffle to the top of the
inner cabinet screw to secure and cover with Screw caps.
12. Open the lower door of the cabinet to maximum angle than open the
lower freezer door to the corresponding position. Slide the block into
position and ensure inner edge aligns with the lower edge of the
refrigerator door than fix the block door screw and cover with screw caps.
Fix Upper refrigerator door to the cabinet door in the same way
13. Take out Sealing Strip from accessory bag and press in the gap
between the cabinet and the refrigerator.
Installation is complete.
Tools Required
Philips screwdriver
Putty Knife
Flathead screwdriver
5/16’’ socket & ratchet
Masking Tape
1. Power off the appliance and remove all items from door trays
2. Remove the upper hinge and the hole cap
3. Remove the refrigerator door and bottom hinge and hole cover
4. Exchange the bottom right hinge and upper right hinge, then install
them according to below steps and re install the top hole cap on the
opposite side.
5. Remove the two fixed blocks from the refrigerator door and rotate
them by 180 degree and install on the opposite side.
Door Reversal instructions
Tabla de contenidos
