shokz ROADWAVE Manual de usuario
User Guide
ROADWAVE V102
Contents
CONTENTS
HOW TO WEAR
WHAT'S IN THE BOX
Change the nose pad
Check your fit
Power on
ON/OFF
Power off
Connect a mobile device
BLUETOOTH CONNECTIONS
Auto-off
Reconnect a mobile device
Clear the device list
Media playback
Call functions
Voice assistant
CONTROLS
Volume Button
Switch languages
01
What’s in the Box
If any part of your product is damaged or missing, do not use it.
Contact authorized Shokz dealer or Shokz customer service.
*Please note that the packaging envelope may vary depending
on the sales region.
WHAT’S IN THE BOX
Shokz RoadWave Hard shell
sunglasses case Soft pouch
User guide
User Guide
Legal Statement
Legal
Magnetic
Charging Cable
Transparent lenses
Additional silicone
nose pads of different size
03
How to Wear
04
CHECK YOUR FIT
Put on the glasses. Move your head up and down to check
whether you’re using the best nose pad size.
If the lens sits too low on your face or too close to your face,
try the thicker nose pad provided in the box.
When riding a bike, wear the glasses over your helmet strap.
Check your fit
05
CHANGE THE NOSE PAD
Change the nose pad
1. Distinguish the rubber part of the nose pad from the hard
part, and only remove the rubber part. If you want to remove
the entire nose pad, refer to page 26: How to switch lenses.
2. Firmly hold the bottom of the rubber nose pad, pull it
down and away from the glasses first, then push it up until it
is completely separated from the glasses.
06
3. Align the bottom of the replacement nose pad hole with
the bottom of the nose pad arm. Notice that the striped side
of the nose pad should be facing inward.
4. Push the nose pad up and then in towards the glasses
until you feel it click into place.
5. Check your fit again.
CHANGE THE NOSE PAD
Change the nose pad
07
On/Off
08
Power on :
Press and hold the volume button and the multifunction
button at the same time until the LED indicator flashes blue.
*Audrey will say : “Welcome to Shokz.”
*When the RoadWave is powered on for the first time,
it directly enters the pairing mode, and the LED Indicator
flashes red and blue alternately.
Power on
POWER ON
LED IndicatorLED Indicator
09
Tabla de contenidos
Otros manuales de Auriculares de shokz
